MZZYG 150PSI Portable Electric Tire Inflator Air Compressor

1. Введение

This manual provides detailed instructions for the safe and efficient operation of your MZZYG 150PSI Portable Electric Tire Inflator Air Compressor. Please read this manual thoroughly before use and retain it for future reference. This device is designed for inflating tires on cars, motorcycles, bicycles, as well as various balls and inflatable toys.

2. Инструкции по технике безопасности

• Не оставляйте надувной насос без присмотра во время работы.
• Храните устройство в недоступном для детей месте.
• Always check the recommended pressure for the item being inflated to avoid over-inflation.
• Не подвергайте устройство воздействию дождя или экстремальных температур.
• Ensure proper ventilation when operating the inflator.
• The inflation port and hose may become hot during prolonged use. Handle with care.
• Не пытайтесь разбирать или модифицировать устройство.

3. Содержимое упаковки

Проверьте наличие всех предметов в посылке:

• 1 x MZZYG Wired Car Air Pump
• 3 x Gas Nozzles (various types)
• 1 х воздушная трубка
• 1 x Car Power Cable (for cigarette lighter)
• 1 х Руководство по эксплуатации

4. Продукт закончилсяview

Familiarize yourself with the main components of your tire inflator:

• Цифровой дисплей: Shows current pressure, target pressure, and inflation mode.
• Кнопки управления: For power, mode selection, and pressure adjustment.
• Порт инфляции: Where the air tube connects to the device.
• Воздушная трубка: Connects the inflator to the item being inflated.
• Силовой кабель: Connects to a 12V car cigarette lighter socket.
• Светодиодный свет: Для освещения в условиях недостаточной освещенности.

Figure 4.1: MZZYG Portable Electric Tire Inflator in use, displaying digital pressure reading.

Figure 4.2: Key features of the MZZYG Tire Inflator, including its brushless motor and efficient pump design.

5. Настройка

1. Подсоедините воздушную трубку: Screw the air tube securely onto the inflation port of the device.
2. Выберите насадку: Choose the appropriate gas nozzle for the valve of the item you intend to inflate. Attach it firmly to the end of the air tube.
3. Подключите питание: Insert the car power cable into your vehicle's 12V cigarette lighter socket. Ensure a secure connection.

6. Инструкция по эксплуатации

1. Прикрепить к пункту: Connect the selected nozzle to the valve stem of the tire or inflatable item. Ensure a tight seal to prevent air leakage.
2. Включение питания: Press the power button to turn on the device. The digital display will illuminate, showing the current pressure.
3. Выберите режим: Use the mode button to cycle through the five available inflation modes (e.g., car, motorcycle, bicycle, ball). Each mode may have a default pressure setting.
4. Установить целевое давление: Use the '+' and '-' buttons to adjust the desired target pressure. The display will show the target pressure blinking.
5. Начало инфляции: Press the start button to begin inflation. The device will automatically stop once the target pressure is reached.
6. Мониторинг прогресса: Observe the digital display to monitor the inflation progress.
7. Отключить: Once inflation is complete and the device has stopped, disconnect the nozzle from the item's valve and then unplug the power cable.

Figure 6.1: The MZZYG Tire Inflator is suitable for a wide range of applications.

Figure 6.2: The device incorporates intelligent chips for accurate pressure measurement and temperature control.

7. Техническое обслуживание

• Уборка: Wipe the exterior of the inflator with a dry, soft cloth. Do not use liquid cleaners or immerse the device in water.
• Хранилище: Храните устройство в прохладном, сухом месте, вдали от прямых солнечных лучей и экстремальных температур.
• Проверка воздуховода: Periodically check the air tube and nozzles for any signs of wear, cracks, or damage. Replace if necessary.

8. Поиск Неисправностей

• Устройство не включается: Ensure the power cable is securely connected to the 12V car cigarette lighter socket and that the vehicle's ignition is on (if required).
• Отсутствие инфляции/Медленная инфляция: Check that the air tube is securely connected to both the inflator and the item's valve. Ensure the target pressure is set correctly and is higher than the current pressure. Verify that the nozzle is appropriate for the valve type.
• Перегрев устройства: If the device becomes excessively hot during prolonged use, turn it off and allow it to cool down for at least 10-15 minutes before resuming operation.
• Неточные показания давления: Ensure the nozzle is fully seated on the valve stem without any air leaks.

9. Технические характеристики

Figure 9.1: Approximate inflation capacities for different types of tires and items.

10. Гарантия и поддержка

For warranty information, technical support, or customer service inquiries, please refer to the contact details provided with your purchase documentation or visit the official MZZYG webПожалуйста, подготовьте номер вашей модели (3256805913932836) перед обращением в службу поддержки.