1. Продукт закончилсяview
The BoxWave MagnetoSnap PD Angle Adapter is a magnetic USB Type-C charging connector designed to enhance convenience and protect your device's charging port. It supports up to 100W power delivery and features a 90-degree right-angle design for optimized cable routing.
Figure 1.1: The MagnetoSnap PD Angle Adapter components, illustrating the magnetic separation.
Основные характеристики:
- Магнитное соединение: Allows for easy and secure attachment/detachment of the charging cable.
- Мощность 100 Вт: Supports high-speed charging for a wide range of USB-C devices.
- Угол 90 градусов: Provides a convenient right-angle connection, reducing cable strain and optimizing desk space.
- Защита порта: Reduces wear and tear on your device's USB-C port by minimizing repeated plugging and unplugging.
- Прочная конструкция: Made from high-quality aluminum alloy materials.
Figure 1.2: Detailed component breakdown of the MagnetoSnap PD Angle Adapter.
2. Инструкции по настройке
Follow these steps to set up your BoxWave MagnetoSnap PD Angle Adapter:
- Insert the Magnetic Plug: Carefully insert the small magnetic Type-C plug into the USB-C charging port of your device (e.g., Noyafa NF-526E Handheld Thermal Imager). Ensure it is fully seated. This plug is designed to remain in your device.
- Connect the Angle Adapter: Connect your existing USB Type-C charging cable to the Type-C input port on the 90-degree angle adapter body.
- Магнитное соединение: Bring the 90-degree angle adapter (with your charging cable attached) close to the magnetic plug inserted in your device. The magnetic forces will automatically snap the two parts together, establishing the charging connection.
Figure 2.1: The magnetic Type-C plug, designed to stay in your device's port.
Figure 2.2: The adapter connected to a device, demonstrating the 90-degree angle and magnetic attachment.
3. Операция
Once the adapter is set up, operating it is straightforward:
- Зарядка: To charge your device, simply bring your USB-C charging cable (connected to the 90-degree adapter) near the magnetic plug in your device. The magnetic connection will automatically engage, and charging will begin.
- Отключение: To disconnect, gently pull the 90-degree adapter away from the magnetic plug. The magnetic connection will release easily. The small magnetic plug can remain in your device's port to protect it from dust and wear.
- Мощность доставки: The adapter supports up to 100W of power, allowing for fast and efficient charging when paired with a compatible charger and cable.
- Передача данных: In addition to charging, the adapter also supports data transfer at speeds up to 480Mbps.
Figure 3.1: The adapter in use, providing a convenient charging connection.
Figure 3.2: Key features of the adapter, including power and data capabilities.
4. Техническое обслуживание
To ensure the longevity and optimal performance of your MagnetoSnap PD Angle Adapter, follow these simple maintenance guidelines:
- Уборка: Use a soft, dry cloth to wipe the adapter clean. Avoid using harsh chemicals or abrasive materials, as these can damage the finish or internal components.
- Хранить в сухом месте: Do not expose the adapter to water or excessive moisture. If it gets wet, disconnect it immediately and allow it to dry completely before reuse.
- Обращаться с осторожностью: While constructed from durable aluminum alloy, avoid dropping the adapter or subjecting it to strong impacts, which could affect its functionality.
- Защита порта: The magnetic plug is designed to remain in your device's port, protecting it from dust, lint, and physical damage. Periodically check the plug for any debris and clean if necessary.
5. Поиск Неисправностей
If you encounter issues with your MagnetoSnap PD Angle Adapter, refer to the following common problems and solutions:
| Проблема | Возможная причина | Решение |
|---|---|---|
| Устройство не заряжается. | Loose connection, incompatible charger/cable, dirty contacts. | Ensure the magnetic connection is secure. Verify your charger and USB-C cable support power delivery. Clean the magnetic contacts on both adapter parts. |
| Медленная скорость зарядки. | Charger/cable does not support 100W PD, device limitation. | Use a USB-C charger and cable that support 100W Power Delivery. Check your device's charging specifications. |
| Магнитная связь слабая. | Debris on magnetic surfaces. | Clean the magnetic surfaces of both the plug and the adapter body with a soft, dry cloth. |
| Адаптер нагревается во время зарядки. | Normal operation under high power, or potential overload. | A slight warmth is normal during high-power charging. If it becomes excessively hot, disconnect immediately and ensure your charger and device are compatible and within specified limits. |
6. Технические характеристики
Detailed technical specifications for the BoxWave MagnetoSnap PD Angle Adapter:
- Материал: Zinc alloy + TPE
- Мощность доставки: Up to 100W / 5A
- Data Transmission Speed: До 480 Мбит/с
- Тип разъема: USB Type-C (Magnetic)
- Дизайн: 90-degree Right Angle
Figure 6.1: Product parameters and approximate dimensions.
7. Гарантия и поддержка
Информация о гарантии:
For specific warranty details regarding your BoxWave MagnetoSnap PD Angle Adapter, please refer to the official BoxWave website or the documentation included with your purchase. Warranty terms may vary by region and retailer.
Техническая поддержка:
BoxWave provides limited third-party technical support for your device (up to 3 inquiries via electronic messaging). For assistance, please contact BoxWave customer service through their official channels. Please note that BoxWave is not affiliated with or endorsed by Noyafa.