sweeek IBEDAVA90BG

sweeek Avalon Storage Bed with Slatted Base and Headboard

Model: IBEDAVA90BG (90x190 cm)

Важная информация по безопасности

Внимательно прочтите все инструкции перед сборкой и использованием. Сохраните это руководство для дальнейшего использования.

  • Перед началом сборки убедитесь, что все детали на месте и не повреждены.
  • Собирайте кровать на мягкой, чистой поверхности, чтобы предотвратить появление царапин.
  • Не затягивайте винты слишком сильно во время сборки.
  • Во время сборки держите мелкие детали в недоступном для детей месте.
  • Регулярно проверяйте все крепежные детали и убедитесь, что они надежно затянуты.
  • Не стойте и не прыгайте на кровати.
  • Distribute weight evenly when using the storage compartment.

Содержимое упаковки

Убедитесь, что в комплект поставки входят все компоненты:

  • Bed frame components (side rails, footboard)
  • Изголовье кровати
  • Slatted base with lifting mechanism
  • Storage compartment base panels
  • Hardware pack (screws, bolts, washers, Allen key)
  • Инструкция по сборке

Примечание: Матрас в комплект не входит.

Инструкция по сборке

Tools required: Phillips head screwdriver (not included), Allen key (included).

  1. Распакуйте и идентифицируйте детали: Carefully remove all components from the packaging. Lay them out on a clean, soft surface. Compare each part to the parts list in the included assembly diagram to ensure everything is present.
  2. Соберите каркас кровати: Attach the side rails to the headboard and footboard using the provided bolts and washers. Ensure all connections are secure but do not fully tighten until the frame is complete.
  3. Install the Storage Base: Place the base panels for the storage compartment into the designated slots within the bed frame. These panels form the bottom of the storage area.
  4. Attach the Slatted Base and Lifting Mechanism: Secure the slatted base frame to the bed frame using the provided hardware. Attach the gas lift mechanism according to the detailed diagram in your separate assembly guide. Ensure the mechanism operates smoothly before proceeding.
  5. Окончательная затяжка: После того, как все компоненты будут установлены и выровнены, полностью затяните все винты и болты. Не перетягивайте.
Крупный план views of the bed's components including the headboard upholstery, bed leg, slatted base, and the fabric strap for lifting the storage mechanism.
Подробный views of the bed's components, showing the headboard stitching, sturdy leg, wooden slats, and the fabric handle for the storage lift.

Operating the Storage Bed

The sweeek Avalon storage bed features a convenient gas lift mechanism for easy access to the under-bed storage compartment.

  • Открыть: Remove the mattress from the bed. Grasp the fabric handle located at the foot end of the slatted base. Gently lift the base upwards. The gas lift mechanism will assist in raising and holding the base in the open position.
  • Слишком близко: Grasp the fabric handle and gently pull the slatted base downwards. Apply slight pressure to overcome the gas lift resistance until the base fully lowers and rests securely on the bed frame.
  • Меры предосторожности: Always remove the mattress before opening the storage compartment. Do not place hands or objects in the mechanism while opening or closing. Ensure the base is fully closed before placing the mattress back on the bed.
Крупный план view of the gas lift mechanism supporting the slatted base of the storage bed in an open position.
The gas lift mechanism provides easy and safe access to the under-bed storage.

Уход и обслуживание

  • Уход за тканью: For general cleaning, gently vacuum the fabric upholstery with a soft brush attachment. For spills, blot immediately with a clean, dry cloth. Do not rub. For stubborn stains, consult a professional upholstery cleaner.
  • Уход за рамой: Протрите каркас кровати мягкой тряпкой.amp Ткань. Избегайте использования едких химикатов или абразивных чистящих средств, так как они могут повредить покрытие.
  • Регулярные проверки: Periodically check all bolts and screws to ensure they are tight. Retighten if necessary to maintain stability and prevent squeaking.
  • Вентиляция: The slatted base provides optimal ventilation for your mattress. Ensure the storage compartment is not overfilled to allow for air circulation.

Поиск неисправностей

ПроблемаРешение
Bed is wobbly or squeaks.Check all bolts and screws. Tighten any loose fasteners. Ensure the bed is on a level surface.
Slatted base does not lift or close smoothly.Ensure the mattress has been removed before lifting. Check for any obstructions in the mechanism. Verify that the gas lift mechanism was installed correctly according to the assembly guide.
Отсутствующие детали или поврежденные компоненты.Do not proceed with assembly. Contact sweeek customer support immediately for assistance.

Технические характеристики

Diagram showing the dimensions of the sweeek Avalon storage bed: Length 202 cm, Depth 97.5 cm, Height 86 cm, Bed base height 25 cm, Storage depth 29.5 cm, Slatted base width 89.5 cm, Slatted base length 190.5 cm.
Detailed dimensions of the sweeek Avalon Storage Bed.
ОсобенностьДеталь
Номер моделиIBEDAVA90BG
Брендсладкие
Габаритные размеры (Д x Ш x В)202 см х 97.5 см х 86 см
Совместимость размеров матрасов90 x 190 см (матрас в комплект не входит)
ЦветБежевый
СтильСовременный
Масса32 Килограмма
Требуется сборкаДа
МатериалыEucalyptus wood, composite panels, polyester fabric upholstery
Включенные компонентыSlatted base, headboard, storage mechanism

Гарантия и поддержка

For information regarding warranty coverage or to obtain customer support, please refer to the documentation provided with your purchase or visit the official sweeek website. If you encounter any issues not covered in this manual, please contact sweeek customer service for assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.