BLNAN LS-CL-G18W-M-S

BLNAN 8.7 Inch Motion Sensor LED Flush Mount Ceiling Light

Model: LS-CL-G18W-M-S

Введение

This manual provides detailed instructions for the installation, operation, and maintenance of your BLNAN 8.7 Inch Motion Sensor LED Flush Mount Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.

Что в коробке?

  • Motion Sensor Ceiling Light (x4)
  • Монтажное оборудование
  • Руководство по эксплуатации

Информация по безопасности

ПРЕДУПРЕЖДЕНИЕ: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Improper wiring can cause electric shock or fire.

  • Ensure the power supply is OFF before installation.
  • Если вы не знакомы с электропроводкой, установку должен выполнять квалифицированный электрик.
  • Do not install on a dimmable circuit. This fixture is non-dimmable.
  • Данный продукт предназначен только для использования внутри помещений.
  • Не вносите изменения в конструкцию прибора или его компоненты.

Настройка и установка

The BLNAN Motion Sensor Ceiling Light is designed for easy hardwired installation on ceilings or walls.

Предварительные шаги по установке

  1. Выключите питание: Ensure the power to the installation area is completely off at the circuit breaker.
  2. Выберите цветовую температуру: Before mounting, locate the toggle switch on the light fixture (labeled C, N, W). Select your desired color temperature: 3000K (Warm White), 4000K (Neutral White), or 5000K (Cold White). This setting cannot be changed after installation without dismounting the fixture.
Image showing the toggle switch for selecting 3000K Warm White, 4000K Neutral White, or 5000K Cold White color temperatures before installation.
Figure 1: Color Temperature Selection Switch

Инструкции по монтажу

  1. Прикрепите монтажный кронштейн: Secure the plastic mounting bracket to your existing junction box. The bracket is compatible with junction boxes having screw holes 2.75 to 3.7 inches apart.
  2. Подключение проводки: Use the included wire nuts to connect the fixture's wires to your household wiring (Black to Black, White to White, Ground to Ground). The fixture includes a hanging rope for temporary support during wiring.
  3. Безопасное приспособление: Align the light fixture with the plastic bracket and rotate it clockwise until it locks securely into place.
Diagram showing the steps for installing the ceiling light: attaching the bracket, connecting wires with a hanging rope, and rotating the fixture to secure it.
Рисунок 2: Этапы установки
Image illustrating the hardwired connection of the light fixture to a junction box, showing wire connections and the slim profile dimensions of 8.7 inches diameter and 0.99 inches thickness.
Figure 3: Hardwired Connection and Dimensions
Diagram showing two installation methods: wall mount with a detection range of 5.9-8.2 ft and ceiling mount with an install height of 8-11.5 ft and detection range of 10-20 ft.
Figure 4: Wall Mount and Ceiling Mount Options

Видео по установке

Video 1: BLNAN Motion Sensor Ceiling Light Installation and Features. This video demonstrates the installation process and highlights key features of the BLNAN motion sensor ceiling light.

Инструкция по эксплуатации

Your BLNAN Motion Sensor Ceiling Light features adjustable operating modes and hold times.

Режимы работы

Locate the mode switch next to the motion sensor on the fixture. Slide the switch to select one of the three operating modes:

  • AUTO Mode (Motion and Light Sensor): The light activates only when motion is detected in dark conditions. It will not turn on during daylight hours.
  • ON Mode (Constant Light): The light remains continuously on, regardless of motion or ambient light conditions.
  • G Mode (Only Motion Sensor): The light activates when motion is detected, functioning in both day and night conditions.
Diagram illustrating the three operating modes: AUTO (motion + light sensor, only lights in darkness), ON (always on), and G (motion sensor, lights in daylight and dark).
Figure 5: Operating Modes Explained

Hold Time Settings

The light features a switch to adjust how long the light stays on after motion is no longer detected. Select from 30 seconds, 120 seconds, or 180 seconds.

Image showing the switches for Hold Time (30s, 120s, 180s), 3 Modes (AUTO, ON, G), and 3 Color Temperatures (CNW) on the light fixture.
Figure 6: Hold Time and Mode Switches

Датчик обнаружения движения

The built-in PIR infrared motion detector has a detection angle of up to 120° and a detection range of 10-20 feet (semidiameter). The recommended mounting height is 8-11.5 feet for optimal performance.

Diagram illustrating the 120-degree detection angle, 8-11.5 ft install height, and 10-20 ft detection range of the motion sensor ceiling light.
Figure 7: Motion Sensor Detection Range

Обслуживание

To ensure the longevity and optimal performance of your BLNAN Motion Sensor Ceiling Light, follow these simple maintenance guidelines:

  • Уборка: Перед чисткой отключите питание. Протрите светильник мягкой, сухой или слегка влажной тряпкой.amp Не используйте агрессивные химикаты, абразивные чистящие средства или растворители, так как они могут повредить покрытие или электрические компоненты.
  • Инспекция: Periodically check for any loose wiring or damage to the fixture. If any issues are found, disconnect power and consult a qualified electrician.
  • Замена лампы: This LED fixture does not require bulb replacement. The LEDs are integrated and designed for long-term use.

Поиск неисправностей

ПроблемаВозможная причинаРешение
Свет не включается.No power supply. Incorrect wiring. Mode switch set to AUTO in bright conditions.Check circuit breaker. Verify wiring connections. Switch to ON or G mode to test.
Датчик движения не обнаруживает.Препятствие в поле зрения датчика view. Incorrect mode setting. Sensor malfunction.Ensure clear path to sensor. Set to AUTO or G mode. Contact support if issue persists.
Свет включается случайным образом.Sensor detecting subtle movements (e.g., drafts, small pets). Sensor sensitivity.Ensure fixture is installed in a stable location. Consider adjusting sensor placement if possible.
Свет горит слишком долго/слишком коротко.Incorrect hold time setting.Adjust the hold time switch to your desired duration (30s, 120s, 180s).

Технические характеристики

ОсобенностьДеталь
БрендБЛНАН
Название моделиCeiling Light (LS-CL-G18W-M-S)
Размеры продукта8.7"Д x 8.7"Ш x 0.98"В
Цветовая температура3000K, 4000K, 5000K (Selectable)
Яркость1800 люмен
Ватtage18 Вт
Томtage120 Вольт
Источник питанияCorded Electric (Hardwired)
Тип установкиFlush Mount (Ceiling or Wall)
Датчик движенияPIR Infrared, 120° Detection Angle, 10-20 ft Range
Особые возможности3 Color Temperatures, Energy Efficient, Motion Sensor, Adjustable Timer
Использование внутри и снаружи помещенийВ помещении
МатериалПластик
Тип отделкиМатовый

Информация о гарантии

BLNAN products are manufactured to high-quality standards. For specific warranty details, please refer to the documentation included with your purchase or contact BLNAN customer support. This warranty typically covers defects in materials and workmanship under normal use.

Поддержка клиентов

If you have any questions, require assistance with installation, or encounter any issues with your BLNAN Motion Sensor Ceiling Light, please contact our customer support team. Contact information can typically be found on the product packaging or the official BLNAN webсайт.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.