Jebao Jecob EP6500 DC Aquarium Return Pump Instruction Manual

Введение

The Jebao Jecob EP6500 DC Aquarium Return Pump is designed for efficient and quiet water circulation in various aquatic environments. Featuring an LCD controller for adjustable speed and multiple operational modes, this pump is suitable for aquariums, ponds, fountains, sumps, and hydroponic systems. Its robust construction with a wear-resistant ceramic shaft ensures long-lasting performance in both fresh and saltwater applications.

This manual provides essential information for the safe and effective installation, operation, and maintenance of your EP6500 pump.

Основные характеристики

• Система ручного управления: Intuitive LCD display for easy operation.
• Универсальное использование: Supports bottom blowing, side draught, and dry use configurations.
• Технология синусоидальных волн: Ensures ultra-quiet operation for minimal disturbance.
• Расширенная защита: IC electronic detection for dry run and locked rotor protection, with automatic power-off upon no water detection.
• Прочная конструкция: Оснащен износостойким керамическим валом для увеличения срока службы.
• Широкое применение: Suitable for both salt water and fresh water environments.

Технические характеристики

Содержимое упаковки

Убедитесь, что все компоненты присутствуют и находятся в хорошем состоянии:

• Jebao Jecob EP6500 DC Aquarium Return Pump
• ЖК-контроллер
• Адаптер питания
• Various Hose Adapters (for different hose diameters)
• Intake Screens (for debris filtration)
• Руководство по эксплуатации

Image: All components of the Jebao Jecob EP6500 DC Aquarium Return Pump package, including the pump, controller, power supply, various hose adapters, and intake screens.

Настройка и установка

1. Attaching Hose Adapters

1. Select the appropriate hose adapter for your tubing diameter.
2. Thread the chosen adapter onto the pump's outlet. Ensure a secure, watertight connection.
3. Connect your water tubing to the adapter. Use a hose clamp (not included) for extra security if needed.

Image: Close-up of the pump's water outlet, showing the threaded connection for hose adapters.

Изображение: сбоку view of the pump's water outlet, illustrating the secure attachment of a hose adapter.

2. Attaching Intake Screens

The pump comes with different intake screens to prevent debris from entering the impeller. Choose the screen suitable for your application (e.g., fine mesh for small debris, wider slots for larger debris).

1. Attach the desired intake screen to the pump's inlet. Ensure it clicks securely into place.

Image: The Jebao Jecob EP6500 pump with a standard intake screen, designed for general debris filtration.

Image: The Jebao Jecob EP6500 pump featuring a side draught intake screen, suitable for low water level applications.

3. Connecting the Controller and Power

1. Connect the pump cable to the LCD controller.
2. Подключите адаптер питания к контроллеру ЖК-дисплея.
3. Plug the power adapter into a properly grounded electrical outlet.

Image: The Jebao Jecob EP6500 pump and its LCD controller, showing the connection points.

4. Размещение

• For submersible use, ensure the pump is fully submerged in water before plugging it in to prevent dry running.
• For dry use (external installation), ensure the pump is primed with water before starting.
• Position the pump on a stable, flat surface.

Инструкция по эксплуатации

LCD Controller Functions

The LCD controller allows for precise control over the pump's operation:

• Кнопка питания: Включает/выключает насос.
• Кнопка РЕЖИМ: Cycles through different operating modes (Constant Flow, Feed Mode, Wave Maker Mode).
• +/- Кнопки: Adjust the flow rate or duration depending on the selected mode.
• ЖК-дисплей: Shows current mode, flow rate, or timer settings.

Режимы работы

1. Режим постоянного потока: Adjust the flow rate from minimum to maximum using the +/- buttons. The display will show the current power level.
2. Режим подачи: Activates a temporary pause in pump operation for feeding fish or other aquatic life. Press the MODE button to enter Feed Mode, and use +/- to set the duration of the pause (e.g., 10, 20, or 30 minutes). The pump will resume normal operation automatically after the set time.
3. Wave Maker Mode: Creates oscillating water flow to simulate natural wave patterns. Use the +/- buttons to adjust the intensity or frequency of the waves.

Обслуживание

Регулярное техническое обслуживание обеспечивает оптимальную производительность и долговечность вашего насоса.

1. Cleaning the Impeller and Intake Screens

1. Отключите насос от источника питания.
2. Remove the intake screen by gently twisting or unclipping it.
3. Carefully remove the impeller cover and then the impeller itself.
4. Clean the impeller and its housing with a soft brush and fresh water to remove any debris or mineral buildup.
5. Clean the intake screen.
6. Reassemble all parts in reverse order, ensuring they are securely fitted.

2. Preventing Dry Running

The pump features IC electronic detection to prevent dry running. However, always ensure the pump is fully submerged or properly primed before operation to avoid unnecessary wear and tear.

Поиск неисправностей

Гарантия и поддержка

For warranty information, technical support, or replacement parts, please refer to the contact information provided with your purchase or visit the official Jebao webСохраните чек о покупке для предъявления гарантийных претензий.