Dynatron C2

Руководство пользователя активного кулера для процессора Dynatron C2 Intel 7529 2U

Модель: C2

Brand: Dynatron

1. Введение

This manual provides detailed instructions for the installation, operation, and maintenance of your Dynatron C2 Intel 7529 2U Active CPU Cooler. Designed for Intel CPUs with an LGA 7529 socket, this cooler ensures optimal thermal management for your system. Please read this manual thoroughly before installation and use.

Key features of the Dynatron C2 include its compact dimensions suitable for 2U rack-mounted servers, enhanced cooling performance with a PWM function fan, premium aluminum stacked-fin and heat pipe construction, convenient mounting system, and pre-applied thermal grease for efficient heat transfer.

2. Информация по технике безопасности

  • Always disconnect power from your computer before installing or removing components.
  • Обращайтесь с кулером процессора и другими компонентами осторожно, чтобы избежать повреждений.
  • Обеспечьте надлежащее заземление для предотвращения электростатического разряда (ЭСР).
  • Хранить в недоступном для детей месте.
  • Do not operate the cooler if the fan is damaged or obstructed.

3. Содержимое упаковки

Проверьте наличие всех предметов в упаковке:

  • Dynatron C2 Intel 7529 2U Active CPU Cooler (1)
  • Mounting hardware (integrated or included as a separate frame)

4. Продукт закончилсяview

The Dynatron C2 CPU cooler consists of a heatsink assembly with aluminum stacked-fins, copper heat pipes, a base plate, and an integrated fan. The base plate comes with pre-applied thermal grease for direct contact with the CPU.

Dynatron C2 CPU Cooler, top-down view

Рисунок 1: Сверху вниз view of the Dynatron C2 CPU Cooler, showing the heatsink fins and integrated fan.

Dynatron C2 CPU Cooler, side view with heat pipes

Рисунок 2: Сторона view of the Dynatron C2 CPU Cooler, highlighting the copper heat pipes extending from the base.

Dynatron C2 CPU Cooler, bottom view with thermal grease

Рисунок 3: Внизу view of the Dynatron C2 CPU Cooler, showing the contact plate with pre-applied thermal grease.

5. Технические характеристики

ОсобенностьСпецификация
Поддержка ЦПИнтел
Сокет ЦПЛГА 7529
Решение2U and Up
Размеры (Д x Ш x В)132.5 x 97.8 x 67 мм (5.22 дюйма Д x 3.85 дюйма Ш x 2.64 дюйма В)
Масса630 г (1.39 фунта)
МатериалAluminum Stacked-fin with Heat Pipes (Copper)
Размер вентилятора60 х 60 х 25 мм
Fan Speed (PWM)20% Duty Cycle: 2300 ± 200 RPM
50% Duty Cycle: 5400 ± 10% RPM
100% Duty Cycle: 11000 ± 10% RPM
Номинальный объемtage12 В постоянного тока
Тип подшипника2 Шариковый подшипник
Потребляемая мощность20% Duty Cycle: 0.84 W
50% Duty Cycle: 2.76 W
100% Duty Cycle: 18 W
Расход воздуха20% Duty Cycle: 11.91 CFM
50% Duty Cycle: 28.38 CFM
100% Duty Cycle: 58.31 CFM
Уровень шума20% Duty Cycle: 25.8 dBA
50% Duty Cycle: 44.4 dBA
100% Duty Cycle: 59.8 dBA
Давление воздуха20% Duty Cycle: 1.48 mm-H2O
50% Duty Cycle: 7.54 mm-H2O
100% Duty Cycle: 28.8 mm-H2O
Lead Wire Pin OutPin#1- Black(-), Pin#2- Yellow(+), Pin#3- Green(Tachometer/ Signal Output), Pin#4- Blue (PWM)
ТермопастаShin-Etsu 7762 (Pre-applied)

6. Настройка и установка

The Dynatron C2 cooler is designed for easy installation on Intel LGA 7529 sockets, featuring a convenient heat sink screw captive mounting system and pre-applied thermal grease.

Этапы установки:

  1. Подготовьте сокет процессора: Ensure the Intel LGA 7529 socket on your motherboard is clean and free of debris.
  2. Установите охладитель: Carefully align the Dynatron C2 cooler over the CPU, ensuring the mounting holes on the cooler's base align with the screw posts around the CPU socket. The cooler's base has pre-applied thermal grease (Shin-Etsu 7762), so no additional application is needed.
  3. Закрепите кулер: Using a screwdriver, tighten the captive screws on the cooler's mounting brackets in a diagonal pattern (e.g., top-left, bottom-right, top-right, bottom-left). Tighten gradually and evenly until the cooler is firmly seated and stable. Do not overtighten.
  4. Подключите вентилятор: Locate the 4-pin fan connector on the Dynatron C2 cooler. Connect this cable to the designated CPU_FAN header on your motherboard. Ensure the connector is fully seated.
LGA 7529 mounting frame

Рисунок 4: Example of a mounting frame for LGA 7529 socket (actual frame may vary or be integrated).

7. Операция

Once installed and connected, the Dynatron C2 CPU cooler operates automatically. The 60x60x25mm fan features a PWM (Pulse Width Modulation) function, allowing the motherboard to dynamically adjust fan speed based on CPU temperature. This ensures efficient cooling while minimizing noise during lighter workloads.

The fan operates at speeds ranging from approximately 2300 RPM (at 20% duty cycle) to 11000 RPM (at 100% duty cycle), providing robust airflow as needed to dissipate heat from the CPU.

8. Техническое обслуживание

To ensure optimal performance and longevity of your Dynatron C2 CPU cooler, periodic maintenance is recommended.

  • Удаление пыли: Regularly inspect the cooler for dust accumulation on the fan blades and heatsink fins. Dust can impede airflow and reduce cooling efficiency. Use compressed air or a soft brush to gently remove dust. Ensure the system is powered off and unplugged before cleaning.
  • Проверка вентилятора: Periodically check that the fan spins freely and quietly. If unusual noises occur, inspect for obstructions or signs of wear.
  • Без разборки: Do not attempt to disassemble the fan or heatsink assembly beyond routine cleaning. Unauthorized disassembly may void your warranty.

9. Поиск Неисправностей

If you encounter issues with your Dynatron C2 CPU cooler, refer to the following common problems and solutions:

  • Проблема: Высокая температура процессора
    Решение: Verify that the cooler is securely mounted to the CPU and that all captive screws are tightened evenly. Check the fan connection to the motherboard's CPU_FAN header. Ensure adequate airflow within the computer chassis and that no cables or components are obstructing the cooler's fan.
  • Issue: Fan Not Spinning or Making Unusual Noise
    Решение: Check the 4-pin fan cable connection to the motherboard. Power off the system and inspect the fan for any physical obstructions (e.g., loose wires). If the fan is faulty or damaged, contact Dynatron support or your reseller for assistance.

10. Гарантия и поддержка

For warranty information, technical support, and service inquiries regarding your Dynatron C2 Intel 7529 2U Active CPU Cooler, please refer to the official Dynatron website or contact your authorized reseller. It is recommended to retain your purchase receipt as proof of purchase for any warranty claims.