IXITAB KWS-AC301/KWS-AC300
Руководство по эксплуатации
KWS-AC301/KWS-AC300 Digital Power Energy Meter
1. Введение
This manual provides detailed instructions for the installation, operation, and maintenance of the IXITAB KWS-AC301/KWS-AC300 Digital AC Power Energy Meter. This device is designed to accurately measure and display AC voltage, current, active power, energy (kWh), and temperature. It is suitable for monitoring electrical parameters in various AC circuits.
2. Информация по технике безопасности
ПРЕДУПРЕЖДЕНИЕ: Electrical shock hazard. Installation and servicing should only be performed by qualified personnel. Failure to follow these instructions may result in serious injury or death.
- Ensure the power supply is disconnected before installation or wiring.
- Не превышайте указанный объемtagи номинальные токи (переменный ток 50-300 В, 100 А).
- Не эксплуатируйте устройство во влажных или сухих условиях.amp условия.
- Держите устройство вдали от легковоспламеняющихся материалов.
- Перед подачей питания убедитесь, что все соединения надежны и правильны.
3. Продукт закончилсяview
The KWS-AC301/KWS-AC300 meter features a clear digital display for simultaneous monitoring of multiple electrical parameters. It is compact and designed for easy integration into electrical panels or systems.
Figure 3.1: Product image placeholder. This image indicates that a specific product image is not available. The actual product is a compact digital meter designed for AC electrical measurements.
Ключевые особенности включают в себя:
- Real-time measurement of AC Voltage (V), Current (A), Active Power (W), and Energy (kWh).
- Отображение температуры.
- High accuracy and stability.
- Легко читаемый цифровой дисплей.
4. Настройка и подключение
Before proceeding, ensure the main power supply is OFF.
- Монтаж: Choose a suitable location for the meter, typically within an electrical panel or enclosure, ensuring adequate ventilation.
- Томtage Input (L/N): Подключите объем переменного токаtage input wires to the designated L (Live) and N (Neutral) terminals on the meter. Ensure the voltagе находится в диапазоне 50–300 В переменного тока.
- Подключение трансформатора тока (ТТ):
- Pass the load wire (the wire carrying the current you wish to measure) through the hole of the external current transformer (CT).
- Connect the two small wires from the CT to the dedicated CT input terminals on the meter. Pay attention to polarity if indicated, though many simple CTs are non-polar for measurement.
- Подключение нагрузки: Ensure the load is correctly connected to the circuit being monitored.
- Включение питания: After all connections are verified and secure, restore power to the circuit. The meter should power on and display readings.
Note: The CT must be connected before applying power to the meter to avoid damage. Do not disconnect the CT while power is applied to the meter.
5. Инструкция по эксплуатации
Once powered on, the KWS-AC301/KWS-AC300 meter will automatically begin displaying the measured parameters. The display typically cycles through or shows simultaneously:
- Томtagе (В): Displays the current AC voltage.
- Ток (А): Displays the current AC amperage flowing through the monitored circuit.
- Активная мощность (Вт): Displays the instantaneous active power consumed by the load.
- Энергия (кВт·ч): Accumulates the total energy consumed over time. This value is typically non-volatile and retained even after power loss.
- Температура (°C/°F): Displays the ambient temperature measured by the device.
Some models may include a button for resetting the energy (kWh) reading. If present, press and hold the button for approximately 5 seconds to clear the accumulated energy data. Refer to specific product markings for button functionality.
6. Техническое обслуживание
The KWS-AC301/KWS-AC300 meter requires minimal maintenance.
- Уборка: Для очистки дисплея и... используйте мягкую сухую ткань.asinг. Не используйте абразивные чистящие средства или растворители.
- Инспекция: Периодически проверяйте надежность соединений проводов.
- Хранилище: If storing the device for an extended period, keep it in a dry, cool environment, away from direct sunlight and extreme temperatures.
7. Поиск Неисправностей
| Проблема | Возможная причина | Решение |
|---|---|---|
| Нет изображения на дисплее/Прибор не включается | Отсутствие питания; неправильная проводка; неисправное устройство. | Check power connections. Verify L/N wiring. Ensure power is applied. If problem persists, contact support. |
| Incorrect current reading (0A or very low) | CT not connected; CT connected incorrectly; load wire not passed through CT. | Ensure CT is properly connected to the meter. Verify the load wire passes through the CT. Do not disconnect CT while powered. |
| Неправильный объемtagэлектронное чтение | Неправильный объемtage input wiring; voltage выходит за пределы указанного диапазона. | Check L/N voltage input connections. Ensure voltage находится в диапазоне 50-300 В переменного тока. |
| Energy (kWh) not accumulating | No current flow; faulty unit. | Ensure there is an active load drawing current. Verify current reading is non-zero. |
8. Технические характеристики
| Параметр | Ценить |
|---|---|
| Модель | KWS-AC301 / KWS-AC300 |
| Рабочий объемtage Диапазон | Переменный ток 50-300 В |
| Текущий диапазон | 0-100А |
| Параметры измерения | Томtage, Current, Active Power, Energy (kWh), Temperature |
| Размеры упаковки | 1.18 x 0.79 x 0.39 дюйма |
| Вес товара | 1.76 унции |
| Производитель | IXITAB |
| ASIN | B0CSWFLZFL |
| Дата первой доступности | 20 января 2024 г. |
9. Гарантия и поддержка
This product is manufactured by IXITAB. For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly through the platform where the product was purchased. Please have your purchase details and product model number (KWS-AC301/KWS-AC300) ready when contacting support.
For further assistance, you may refer to the product listing on Amazon.com.