SAMA SV02 ATX Mid Tower PC Case User Manual

1. Введение

This manual provides detailed instructions for the installation, operation, and maintenance of your SAMA SV02 ATX Mid Tower PC Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and optimal performance of your computer system.

2. Продукт закончилсяview

The SAMA SV02 is an ATX Mid Tower PC case designed for gaming and high-performance builds, featuring a panoramic tempered glass design and efficient cooling capabilities.

2.1 Основные характеристики

• 270° Frameless Tempered Glass: Предлагает беспрепятственный view внутренних компонентов.
• Back-Plug Motherboard Support: Innovative design for simplified cable management and a cleaner aesthetic.
• Усовершенствованная система охлаждения: Supports up to 360mm liquid radiators and features a mesh side panel for enhanced airflow.
• Предустановленные ARGB-вентиляторы: Includes three 120mm ARGB fans (two side, one rear) for effective cooling and customizable lighting.
• Modern I/O Panel: Equipped with USB 3.0, Type-C, and audio ports for high-speed connectivity.
• Универсальное хранение: Multiple slots for 2.5" SSDs and 3.5" HDDs.

2.2 Содержимое упаковки

Пожалуйста, убедитесь, что все компоненты присутствуют:

• SAMA SV02 ATX Mid Tower PC Case
• 3 вентилятора ARGB 120 мм (предустановлены)
• ARGB Control Hub
• Коробка с принадлежностями (винты, кабельные стяжки, стойки)
• Руководство пользователя (этот документ)

2.3 Case Components Diagram

Refer to the following images for an overview of the case components and layout.

Рисунок 2.3.1: Болееview of SAMA SV02 key features including backplug motherboard support, tempered glass, multi SSD/HDD slots, Type-C, HD audio, 360 cooling support, pre-installed ARGB fans, and 410mm GPU support.

Рисунок 2.3.2: Фронтальная проекция view of the SAMA SV02 PC case, showcasing the internal layout with pre-installed ARGB fans and liquid cooling components.

Рисунок 2.3.3: Сзади view of the SAMA SV02 PC case, showing the I/O shield cutout, PCI slots, and power supply mounting area.

3. Настройка и установка

Follow these steps to install your components into the SAMA SV02 PC case.

3.1 Подготовка дела

1. Carefully remove the tempered glass side panels. Locate the screws securing the panels, typically at the rear of the case, and remove them.
2. Поместите корпус на устойчивую ровную поверхность.

3.2 Установка материнской платы

The SAMA SV02 supports ATX, Micro-ATX, and Mini-ATX motherboards, including back-plug designs for improved cable management.

Figure 3.2.1: Diagram illustrating motherboard compatibility (ITX, MATX, ATX) and maximum component dimensions for CPU cooler height (181mm) and GPU length (410mm).

1. Install the I/O shield into the rear opening of the case (if not pre-attached to your motherboard).
2. Align your motherboard with the standoffs inside the case. Ensure the screw holes on the motherboard match the standoffs.
3. Закрепите материнскую плату прилагаемыми винтами.

3.3 Установка накопителя

The case offers versatile storage options for both 2.5" SSDs and 3.5" HDDs.

Figure 3.3.1: Diagram showing the locations for 2.5" SSDs (motherboard side) and 3.5" HDDs (bottom and motherboard side) within the SAMA SV02 case, highlighting backplug motherboard support.

1. 2.5-дюймовые твердотельные накопители: Mount up to two 2.5" SSDs on the designated brackets behind the motherboard tray. Secure with screws.
2. 3.5-дюймовые жесткие диски: Install 3.5" HDDs in the drive cage located at the bottom of the case or on the motherboard side, as indicated in the diagram. Secure with screws.

3.4 Установка блока питания (БП)

1. Slide your PSU into the dedicated compartment at the bottom rear of the case.
2. Secure the PSU to the case with screws from the rear.

3.5 Установка видеокарты (GPU) и платы расширения

The case provides 7 PCI slots for expansion cards.

Figure 3.5.1: Illustration of the 7 PCI expansion slots available on the SAMA SV02 case, allowing for multiple expansion cards.

1. Снимите заглушки с необходимых слотов PCI на задней панели корпуса.
2. Вставьте видеокарту или другие платы расширения в соответствующие слоты PCIe на материнской плате.
3. Закрепите карты винтами.

3.6 Установка системы охлаждения (опционально)

The SV02 supports various cooling configurations, including up to 360mm liquid coolers.

Figure 3.6.1: Diagram detailing fan and radiator support: 3x12cm/3x14cm (optional) or 120/240/280/360 liquid cooler at the top, 1x12cm (pre-installed) or 1x14cm fan/120/140 liquid cooler at the rear, and 2x12cm (pre-installed) at the motherboard side. Also shows optional 3x12cm fans in the power box area.

1. Жидкостный охладитель: If installing a liquid cooler, mount the radiator and fans to the designated locations (e.g., top, side, or rear) as per the cooler's instructions and the case's support.
2. Дополнительные вентиляторы: Install any additional case fans in available mounting points (e.g., top, bottom) to optimize airflow.

3.7. Организация кабелей и разъемы передней панели

Utilize the back-plug motherboard support and cable routing channels for a clean build.

Figure 3.7.1: Diagram of the front I/O panel, indicating the locations of the Type-C port, USB 3.0 ports, HD audio/microphone jacks, reset button, and power button.

Figure 3.7.2: Wiring diagram for the integrated ARGB hub, showing connections for 5V 3-pin ARGB fans, LED strips, SATA power, and motherboard sync headers (GIGABYTE VDG, ASUS AURA ADD).

1. Connect all necessary power cables from the PSU to your motherboard, GPU, and storage drives.
2. Connect the front panel cables (USB 3.0, Type-C, HD Audio, Power Switch, Reset Switch, Power LED, HDD LED) to their respective headers on your motherboard.
3. Connect the pre-installed ARGB fans to the integrated ARGB hub. Ensure the hub is connected to a SATA power connector from your PSU.
4. For motherboard ARGB sync, connect the ARGB hub's 3-pin ARGB cable to the 5V ARGB header on your motherboard (e.g., GIGABYTE VDG or ASUS AURA ADD header).
5. Route cables neatly behind the motherboard tray using the provided cable ties.

3.8 Окончательная сборка

1. Once all components are installed and cables are managed, reattach the tempered glass side panels.
2. Убедитесь, что все винты надежно затянуты.

4. Инструкция по эксплуатации

4.1 Включение

Press the power button on the front I/O panel to turn on your computer.

4.2 Управление ARGB-подсветкой

The pre-installed ARGB fans and any connected ARGB devices can be controlled in two ways:

• Ручное управление: Use the dedicated LED button on the front I/O panel to cycle through various lighting effects and colors.
• Синхронизация программного обеспечения материнской платы: If the ARGB hub is connected to your motherboard's 5V ARGB header, you can control the lighting effects using your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, ASRock Polychrome Sync).

4.3 Использование передних портов ввода/вывода

Передняя панель ввода/вывода обеспечивает удобный доступ к:

• USB 3.0 Порты: Для высокоскоростной передачи данных с использованием совместимых устройств.
• Порт Type-C: Для современных устройств с разъемом USB-C.
• Разъемы HD-аудио: Для подключения наушников и микрофонов.

5. Техническое обслуживание

Регулярное обслуживание помогает обеспечить оптимальную производительность и долговечность компонентов вашего ПК.

5.1 Очистка пылевого фильтра

The SAMA SV02 case features dust filters to prevent dust buildup. Periodically remove and clean these filters using compressed air or a soft brush. Ensure the filters are completely dry before reattaching.

5.2 Tempered Glass Cleaning

Очистите панели из закаленного стекла салфеткой из микрофибры и неабразивным средством для чистки стекол. Избегайте использования агрессивных химикатов, которые могут повредить стекло или покрытие.

5.3 Очистка вентилятора

Over time, dust can accumulate on fan blades, reducing cooling efficiency. Use compressed air to gently clean the fan blades of the pre-installed ARGB fans and any other installed fans.

6. Поиск Неисправностей

If you encounter issues with your SAMA SV02 PC case, refer to the following common troubleshooting steps.

6.1 Вентиляторы не вращаются или подсветка ARGB не загорается

• Проверьте мощность: Ensure the ARGB hub is correctly connected to a SATA power connector from your PSU.
• Проверьте соединения: Verify that all fans are securely connected to the ARGB hub.
• Синхронизация материнской платы: If using motherboard software for ARGB control, ensure the ARGB hub's 3-pin ARGB cable is properly connected to the motherboard's 5V ARGB header. Also, check your motherboard's software settings.
• Ручное управление: Try pressing the LED button on the front I/O panel to see if the lights respond.

6.2 Передние порты ввода/вывода не работают

• Проверьте подключения материнской платы: Ensure all front panel cables (USB 3.0, Type-C, HD Audio) are correctly and securely connected to their respective headers on your motherboard. Refer to your motherboard manual for correct header locations.

6.3 General System Instability or Overheating

• Расход воздуха: Ensure proper airflow within the case. Check that all fans are spinning correctly and are oriented to create an effective airflow path (intake and exhaust).
• Пыль: Clean dust filters and fans regularly to prevent heat buildup.
• Зазор между компонентами: Verify that no cables or components are obstructing fan blades or airflow pathways.

7. Технические характеристики

Below are the technical specifications for the SAMA SV02 ATX Mid Tower PC Case.

8. Гарантия и поддержка

For warranty information and technical support, please refer to the official SAMA webна сайте или обратитесь к местному продавцу. Сохраните чек о покупке для предъявления гарантийных претензий.

SAMA Official Store: Visit SAMA Store