AXLAHA Headlight Assembly Instruction Manual

1. Продукт закончилсяview

This manual provides instructions for the AXLAHA Headlight Assembly, designed as a direct replacement for 2012, 2013, 2014, and 2015 Toyota Tacoma models. This assembly features a chrome housing with an amber reflector and is compatible with Halogen Headlight Models Only. Bulbs are not included.

The headlights are constructed from high-quality materials, ensuring durability and performance. They are quality tested to meet IP70 waterproof standards, providing reliable operation in various environmental conditions. Special fine chrome plating and reflectors enhance light reflectivity for improved night driving safety. An integrated adjuster allows for beam adjustment as needed.

2. Совместимость с транспортными средствами

This headlight assembly is compatible with the following vehicle specifications:

• Тип обслуживания автомобиля: 2012, 2013, 2014, 2015 Toyota Tacoma
• Номера деталей OEM: 8111004181, 8115004181
• Применимость: Halogen Headlight Models Only

To ensure proper fitment, verify your vehicle's model year and existing headlight type. For Toyota vehicles, VINs starting with "1", "4", or "5" indicate vehicles assembled in the US. VINs beginning with "2" indicate vehicles assembled in Canada, and VINs that start with "J" were produced in Japan. This product is designed for North American/Canadian built models and does not fit Japan-built models.

Image: Guide for checking vehicle specifications to ensure proper headlight fitment.

Image: Diagram explaining how to decode a Toyota VIN to determine the vehicle's manufacturing origin.

3. Компоненты и характеристики продукта

The headlight assembly includes a clear lens, amber reflector, and housing designed for optimal light output and durability. Key features include:

• Прозрачная линза: Provides maximum light transmission.
• Amber Reflector: Повышает видимость и безопасность.
• Ближний/дальний свет: Использует лампочки H4 (не входят в комплект).
• Световой сигнал поворота: Uses 4157A bulbs (included).
• Adjuster: For precise beam alignment.
• Односторонняя вентиляция: Prevents moisture buildup.
• Bulb Protective Film: Added protection for the bulb.

Изображение: подробное view of the front of the headlight assembly, highlighting the clear lens, parking light, turn signal light, high/low beam, and safety reflector.

Изображение: подробное view of the rear of the headlight assembly, showing the adjuster, one-way vent, and bulb protective film.

4. Настройка и установка

The AXLAHA Headlight Assembly is designed for a plug-and-play installation, requiring no complicated techniques or drilling. It comes as a pair, including both driver and passenger side assemblies.

Этапы установки:

1. В целях безопасности убедитесь, что автомобиль выключен, а аккумулятор отсоединен.
2. Remove the old headlight assembly by unscrewing any mounting bolts and disconnecting electrical connectors.
3. Connect the electrical connectors from the new AXLAHA headlight assembly to the vehicle's wiring harness.
4. Secure the new headlight assembly in place using the original mounting points and hardware.
5. Подсоедините аккумулятор автомобиля.
6. Test all lighting functions (high beam, low beam, turn signal, parking light) to ensure proper operation.
7. Adjust the headlight beam as necessary (refer to the Operating section).

Image: A person wearing gloves carefully installing a headlight assembly into a vehicle.

Видеоинструкции по установке:

5. Operating the Headlights

Once installed, operate your headlights using your vehicle's standard controls. The high/low beam function is controlled by your vehicle's stalk switch. The turn signals and parking lights operate as per your vehicle's original design.

Headlight Beam Adjustment:

The headlight assembly includes an adjuster to fine-tune the beam direction. Proper adjustment ensures optimal visibility without blinding oncoming traffic. Locate the adjuster screw on the back of the headlight housing (refer to 'Back Details' image in Section 3). Use a screwdriver to turn the adjuster to raise or lower the beam as required. It is recommended to perform this adjustment on a level surface, facing a wall, following local regulations for headlight aiming.

Image: Close-up of the headlight adjuster screw, indicating vertical adjustment capability.

Image: Comparison of road visibility at night with properly functioning headlights versus poor lighting.

6. Техническое обслуживание

To ensure the longevity and optimal performance of your AXLAHA Headlight Assembly, regular maintenance is recommended.

• Уборка: Regularly clean the outer lens with a soft cloth and mild soap solution to remove dirt and debris. Avoid abrasive cleaners that can damage the UV coating.
• Инспекция: Periodically inspect the headlight assembly for any signs of damage, cracks, or moisture intrusion. The IP70 waterproof rating helps prevent water accumulation, but extreme conditions or physical damage can compromise this.
• Замена лампы: If a bulb burns out, replace it promptly with the correct type (H4 for high/low beam, 4157A for turn signal). Ensure the vehicle is off and cool before handling bulbs.

Image: Illustration demonstrating the waterproof capabilities of the headlight assembly against rain, snow, and dust.

Image: Visual explanation of the UV coating's role in preventing yellowing and cracking of the headlight lens.

7. Поиск Неисправностей

If you encounter issues with your headlight assembly, consider the following common troubleshooting steps:

• Фара не работает: Check the bulb for damage or burnout. Verify electrical connections are secure. Inspect the vehicle's fuse box for a blown headlight fuse.
• Тусклое освещение: Обеспечьте правильную мощностьtage bulbs are installed. Check for any haze or dirt on the lens that might be obstructing light output.
• Конденсация внутри линзы: Small amounts of condensation can occur due to temperature changes and typically dissipate. If excessive or persistent, ensure the one-way vent is clear and not blocked. Check for cracks in the housing or seal.
• Неправильная диаграмма направленности луча: Use the integrated adjuster to correct the beam alignment. If the issue persists, ensure the headlight assembly is securely mounted.

For persistent issues or complex problems, it is recommended to consult a professional automotive technician.

8. Технические характеристики

9. Гарантия и поддержка

AXLAHA products come with a 2-year warranty, ensuring peace of mind regarding product quality and performance. Our dedicated after-sales service team is available to assist with any issues or questions you may have after purchasinг нашу продукцию.

Связаться со службой поддержки:

По любым вопросам или для получения поддержки, пожалуйста, свяжитесь с нами по электронной почте:

• Электронная почта службы поддержки клиентов: info@axlaha.com / service@axlaha.com

Image: Graphic detailing AXLAHA's commitment to lifetime service and a 1-year warranty.