Instruction Manual for SHENGLE JR1932RX-P-24V Control Kit

Продукт болееview

This kit provides a replacement 2.4G Bluetooth remote control and a JR1932RX-P-24V receiver control box motherboard for children's electric ride-on cars. It is designed to restore or upgrade the remote control functionality of compatible ride-on vehicles.

• Номер модели: JR1932RX-P-24V
• Совместимость: Designed for specific electric ride-on car models. Please verify compatibility with your original parts before purchase.
• Власть: Operates on DC 24V with a maximum load current of 35A.
• Дистанционное управление: Utilizes 2.4G Bluetooth technology for stable connection.
• Аккумуляторы: Батарейки для пульта дистанционного управления в комплект не входят.

Image 1: The SHENGLE JR1932RX-P-24V receiver control box and its accompanying 2.4G Bluetooth remote control. The control box is dark gray with a label indicating its model number and electrical specifications. The remote control is white with black buttons for directional movement and other functions.

Настройка и установка

Proper installation and pairing are essential for the correct operation of the control kit. Always ensure the ride-on car's power is off before beginning installation.

1. Установка блока управления

1. Отключить питание: Before handling any electrical components, ensure the ride-on car's battery is disconnected to prevent electrical shock or damage.
2. Locate Old Control Box: Identify the location of the existing control box in your ride-on car. This is typically found under the seat or hood.
3. Демонтаж старого блока управления: Carefully disconnect all wiring harnesses and mounting screws from the old control box. Note the orientation and connection points for reassembly.
4. Установите новый блок управления: Position the new JR1932RX-P-24V control box in the same location. Secure it using the original mounting screws or appropriate fasteners.
5. Подключение проводки: Reconnect all wiring harnesses to the new control box. Ensure each connector is firmly seated. Refer to your ride-on car's original wiring diagram if available.
6. Подсоедините батарею: Once all connections are secure, reconnect the ride-on car's battery.

Изображение 2: Подробный view of the SHENGLE JR1932RX-P-24V control box, highlighting its various ports and the label with electrical specifications. This image is useful for identifying connection points during installation.

2. Установка батареи пульта дистанционного управления.

• Найдите батарейный отсек на задней стороне пульта дистанционного управления.
• Откройте крышку батарейного отсека.
• Insert the required batteries (typically AAA or AA, check the remote's markings) ensuring correct polarity (+/-).
• Плотно закройте крышку батарейного отсека.

3. Сопряжение пульта дистанционного управления

The instructions for pairing the remote control with the receiver are clearly printed on the packaging box of the product. Please refer to these specific instructions for the most accurate pairing procedure. Generally, the process involves:

• Turning on the ride-on car.
• Pressing and holding a specific button (often a "code" or "pair" button) on the remote control for a few seconds.
• Observing an indicator light on the remote or car to confirm successful pairing.

If pairing is unsuccessful, ensure the remote control has fresh batteries and that the control box is correctly installed and powered.

Инструкция по эксплуатации

Once the control box is installed and the remote control is paired, you can operate the ride-on car remotely.

Функции дистанционного управления

• Кнопка питания: Включает/выключает пульт дистанционного управления.
• Кнопки «Вперед/Назад»: Control the car's movement forward or backward.
• Left/Right Turn Buttons: Steer the car left or right.
• Регулировка скорости: Some remotes include buttons to adjust the car's speed (e.g., low, medium, high).
• Кнопка аварийной остановки: A dedicated button (often red) to immediately stop the car for safety.

Always supervise children when operating the ride-on car, especially when using the remote control. Ensure the operating area is clear of obstacles and hazards.

Техническое обслуживание и уход

To ensure the longevity and optimal performance of your SHENGLE control kit, follow these maintenance guidelines:

• Уборка: Wipe the control box and remote control with a dry, soft cloth. Avoid using harsh chemicals or abrasive cleaners.
• Хранилище: Храните компоненты в прохладном, сухом месте, вдали от прямых солнечных лучей и экстремальных температур.
• Уход батареи: Если пульт дистанционного управления не будет использоваться в течение длительного времени, извлеките батарейки из него, чтобы предотвратить протечку.
• Защита от влаги: Protect the control box and remote from water and excessive moisture, as this can cause damage.

Поиск неисправностей

If you encounter issues with your SHENGLE control kit, refer to the following common problems and solutions:

Image 3: An angled perspective of the SHENGLE JR1932RX-P-24V control box, showing its compact design and connection ports from a different view. This can assist in visualizing the component's placement within the ride-on car.

Технические характеристики продукта

Гарантия и поддержка

For specific warranty information or technical support regarding your SHENGLE JR1932RX-P-24V control kit, please contact the manufacturer directly. Keep your purchase receipt as proof of purchase.

Производитель: SHENGLE ELECTRONIC

Контактную информацию обычно можно найти на упаковке продукта или на официальном сайте производителя. webсайт.