EVTSCAN Soil Tester User Manual

Введение

This manual provides detailed instructions for the proper use and maintenance of your EVTSCAN Soil Tester. Please read this manual thoroughly before operating the device to ensure accurate measurements and prolonged product life. This device is designed for measuring soil temperature, air temperature, air humidity, and illumination levels in various environments such as plants, gardens, lawns, and farms.

Продукт болееview

The EVTSCAN Soil Tester is a portable device designed for quick and accurate environmental measurements. It features a clear display, easy-to-use buttons, and a durable probe.

Рисунок 1: Передняя часть view of the EVTSCAN Soil Tester.

Основные характеристики:

• Простота использования: Obtain test results quickly by inserting the probe into the soil.
• Точное измерение: Designed for precise readings of environmental conditions.
• Функция блокировки данных: A dedicated HOLD button allows for convenient data viewинж.
• Портативная конструкция: Компактный и легкий, что обеспечивает удобство транспортировки и использования в различных местах.
• Универсальное применение: Suitable for family plants, gardens, lawns, and farms.

Настраивать

Установка аккумулятора:

1. Найдите батарейный отсек на задней панели устройства.
2. Откройте крышку батарейного отсека.
3. Remove any packaging from the included 9V 6F22 dry battery.
4. Вставьте 9-вольтовую батарею, соблюдая полярность.
5. Плотно закройте крышку батарейного отсека.

Figure 2: Location of the battery compartment.

Note: The device will not power on until the battery is correctly installed and any protective film is removed from the battery terminals.

Инструкция по эксплуатации

Управление устройством:

Figure 3: Control buttons on the EVTSCAN Soil Tester.

• Кнопка ВКЛ/ВЫКЛ:
  • Short press to turn the device on.
  • Long press for 3 seconds to turn the device off.
  • Устройство автоматически выключится через 15 минут бездействия для экономии заряда батареи.
• Кнопка ℃/℉:
  • Press this button to switch the temperature unit between Celsius (℃) and Fahrenheit (℉).
• Кнопка УДЕРЖАТЬ:
  • Press this button to lock the current readings on the display. This is useful for recording data.
  • Press again to release the data lock and resume live readings.

Проведение измерений:

1. Turn on the device by short pressing the ВКЛ/ВЫКЛ кнопка.
2. Insert the metal probe into the soil to approximately 2/3 of its length (about 14-15 cm or 5.5-6 inches). Ensure the probe is fully inserted into the root zone for accurate soil readings.
3. Position the device to face the sun for accurate illumination readings.
4. Wait a few moments for the readings to stabilize on the display. The display will show soil temperature, air temperature, air humidity, and illumination.
5. При желании нажмите кнопку ДЕРЖАТЬ button to lock the displayed data for easier recording.
6. After use, gently remove the probe from the soil.

Figure 4: Probe length and recommended insertion depth.

Рисунок 5: Example of readings on the display.

Технические характеристики

Обслуживание

• Уборка: After each use, wipe the metal probe clean with a damp cloth to remove any soil residue. Do not immerse the main body of the device in water.
• Хранилище: Store the soil tester in a dry, cool place away from direct sunlight and extreme temperatures.
• Замена батареи: If the display becomes dim or the device does not power on, replace the 9V battery. Ensure proper disposal of old batteries according to local regulations.
• Избегайте воздействия: Handle the device with care to prevent damage to the probe or internal components.

Поиск неисправностей

Гарантия и поддержка

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official EVTSCAN webСохраните чек в качестве подтверждения покупки.