SAMA IM01 Pro Black Micro ATX Mini-ITX Computer Case

1. Введение

Thank you for choosing the SAMA IM01 Pro Black Micro ATX Mini-ITX Computer Case. This manual provides essential information for the proper assembly, operation, and maintenance of your new PC case. Please read this guide thoroughly before beginning installation to ensure optimal performance and longevity of your system.

Image: The SAMA IM01 Pro Black computer case, showcasing its compact design and internal RGB lighting.

2. Правила техники безопасности

Во избежание травм или повреждения компонентов всегда соблюдайте следующие меры предосторожности:

• Убедитесь, что ваше рабочее место чистое, хорошо освещенное и свободно от статического электричества. При наличии используйте антистатический браслет.
• Перед установкой или снятием каких-либо компонентов отключите блок питания от розетки.
• Держите компоненты за края, чтобы не прикасаться к чувствительным схемам.
• Не прилагайте чрезмерных усилий при установке компонентов. Если компонент не подходит, перепроверьте его ориентацию и совместимость.
• Храните мелкие детали и винты в недоступном для детей месте.

3. Содержимое упаковки

Убедитесь, что в комплект поставки входят все следующие предметы:

• SAMA IM01 Pro Black Micro ATX Mini-ITX Computer Case
• 1 x 120mm Silent Fan (pre-installed)
• Коробка с принадлежностями (содержащая винты, стойки, кабельные стяжки и т. д.)
• Power Adapter Cable (for USA power cord)
• GPU Anti-sag Bracket

4. Особенности продукта

The SAMA IM01 Pro Black case offers a range of features designed for optimal performance and user convenience:

• Metal Mesh Panel Design: Ensures high airflow for efficient cooling.
• Совместимость с материнской платой: Supports Micro ATX and Mini-ITX motherboards.
• Pre-installed Fan: Includes one 120mm silent fan for immediate cooling.
• Порты ввода/вывода на передней панели: Features 2x USB 3.0, HD Audio, and 1x Type-C port for convenient connectivity.
• Snap Fastener Design: Front, top, side, and bottom panels utilize buckle design for tool-less disassembly and assembly.
• Adjustable PSU Location: Allows for flexible power supply placement.
• Поддержка охлаждения: Maximum support for 166mm air-cooled CPU coolers and 280mm water-cooled radiators.
• Поддержка привода: Accommodates up to 5 HDD or 5 SSD drives depending on configuration.
• Inverted Installation Design: Supports both upright and inverted system configurations.

Передняя панель ввода / вывода

Изображение: подробное view of the front panel I/O, showing the power button, audio interface, two USB 3.0 ports, and one Type-C port.

Motherboard and Drive Compatibility

Image: An internal diagram illustrating the compatible sizes for M-ATX and ITX motherboards, along with potential locations for fans and hard disk drives (Expansion Bin, Top panel, Bottom plate).

Image: A visual guide to the various locations for HDD and SSD installation, including Top Board Support (1 HDD or 1 SSD), Bottom Panel Support (2 HDDs or 2 SSDs), and Expansion Compartment Support (2 HDDs or 2 SSDs).

Power Supply and GPU Support

Image: This diagram shows how an ATX power supply is installed at the top of the case. It also specifies graphics card length limitations based on PSU length: up to 355mm for PSUs " 140mm, 300mm for PSUs between 140-150mm, and 280mm for PSUs > 150mm.

Inverted Installation Design

Image: A side-by-side comparison demonstrating the flexibility of the case, allowing for both standard upright installation (Power supply front mounting, VGA card bottom mounting) and inverted (Reverse Mounting, Power Supply Front Mounting, VGA Card Bottom Mounting).

5. Настройка и установка

Follow these steps to assemble your computer system within the SAMA IM01 Pro case.

5.1 Подготовка дела

1. Поместите корпус на ровную, устойчивую поверхность.
2. Gently pull the side panels, top panel, and front panel to remove them. They are secured by snap fasteners and do not require tools.

5.2 Установка материнской платы

1. Install the CPU, CPU cooler, and RAM onto your Micro ATX or Mini-ITX motherboard before placing it in the case.
2. Align the motherboard with the standoffs inside the case. Ensure the I/O shield is properly seated in the rear opening.
3. Закрепите материнскую плату с помощью прилагаемых винтов.

5.3 Установка блока питания

1. Determine the desired PSU location (adjustable).
2. Mount your ATX or SFX power supply into the designated bracket.
3. Secure the PSU bracket to the case.
4. Connect the included power adapter cable to your PSU and route it through the designated channel to the rear of the case.

Image: The included power adapter cable, designed to support USA power cords and facilitate easy routing from the power supply.

5.4 Component Installation (GPU, Drives, Fans)

1. Видеокарта (GPU): Install your graphics card into the PCIe slot on the motherboard. Utilize the included GPU anti-sag bracket if necessary.
2. Накопители (HDD/SSD): Install your 2.5-inch or 3.5-inch drives into the designated mounting locations (top panel, bottom panel, or expansion chamber).
3. Additional Fans/Radiators: Install additional cooling fans or liquid cooling radiators as desired in the available mounting points (top, bottom, side, expansion chamber).

Image: The optional extension chamber, which can be used to install additional fans (3x 12cm or 2x 14cm) or liquid coolers, or alternatively, 2 HDD or 2 SSD drives.

5.5 Управление кабелями

1. Route all cables neatly behind the motherboard tray and through the cable management cutouts.
2. Use cable ties to secure bundles of cables, ensuring proper airflow and a clean build.

5.6 Сборка корпуса

1. Once all components are installed and cables are managed, reattach the side panels, top panel, and front panel by aligning them and pressing firmly until the snap fasteners engage.

6. Операция

After successful assembly, connect your peripherals and power cable to the system. Press the power button on the front panel to turn on your computer. The front I/O ports (USB 3.0, Type-C, Audio) are ready for use with your devices.

7. Уход и обслуживание

Regular maintenance helps ensure optimal performance and longevity of your SAMA IM01 Pro case:

• Очистка от пыли: Periodically remove the mesh panels and use compressed air or a soft brush to clean dust from fans, radiators, and internal components.
• Внешняя очистка: Протрите внешние поверхности мягкой, damp Ткань. Избегайте использования абразивных чистящих средств и растворителей.
• Проверка кабельной разводки: Occasionally inspect internal cables to ensure they remain neatly routed and do not obstruct airflow.

8. Поиск Неисправностей

If you encounter issues with your SAMA IM01 Pro case, refer to the following common problems and solutions:

9. Технические характеристики

Размеры

Image: A diagram showing the dimensions of the SAMA IM01 Pro case. Without the expansion chamber, it measures 391mm (L) x 205mm (W) x 325mm (H). With the expansion chamber fitted, the height increases to 362mm.

10. Гарантия и поддержка клиентов

SAMA products are manufactured to high-quality standards. For warranty information or technical support, please refer to the official SAMA webна сайте или обратитесь к продавцу. Сохраните чек в качестве подтверждения покупки на случай предъявления гарантийных претензий.