1. Продукт закончилсяview
The Traxxas 9592 Hardware Kit for the Sledge RC vehicle provides a complete set of replacement screws and fasteners. This kit is designed to refresh your Sledge with new, factory-fresh hardware, ensuring optimal performance and durability.
Each kit features individual compartments to keep all hardware organized, along with a handy label system to measure and identify specific parts. This organization simplifies the process of finding the correct fastener for your application.
Основные характеристики:
- Black Oxide Coating: Provides improved rust resistance for enhanced longevity.
- Полный комплект: Contains all necessary hardware used on the Traxxas Sledge vehicle.
- Tough Hex-Drive Heads: Designed for durability and reliable fastening.
- Организованное хранение: Individual box compartments keep parts neatly separated.
- Идентификационные этикетки: Handy labels assist in identifying and measuring hardware.
Image 1.1: The Traxxas 9592 Sledge Hardware Kit displayed in its organized packaging, showcasing various screws and fasteners.
2. Настройка и установка
This hardware kit is intended for use during the assembly, repair, or maintenance of your Traxxas Sledge RC vehicle. Proper identification and selection of hardware are crucial for correct fitment and vehicle performance.
Steps for Hardware Selection and Installation:
- Обратитесь к руководству по эксплуатации автомобиля: Always refer to your Traxxas Sledge vehicle's official instruction manual for specific hardware requirements, sizes, and torque specifications for each component.
- Определить части: Use the labels within the hardware kit's compartments to identify the correct screw or fastener type and size. The labels assist in measuring and matching parts.
- Выберите правильный инструмент: Ensure you use the appropriate hex driver for the tough hex-drive heads to prevent stripping or damage to the fasteners.
- Правильная установка: Install hardware according to the Sledge vehicle manual's instructions. Avoid over-tightening, which can strip threads or damage components.
- Фиксатор резьбы (если применимо): For critical connections subject to vibration, consider using a small amount of removable threadlocker (not included) as recommended by the Sledge vehicle manual.
3. Эксплуатационные соображения
While this kit primarily contains static hardware, proper handling and usage during assembly contribute to the overall operational integrity of your RC vehicle.
- Надежное крепление: Ensure all hardware is securely fastened to prevent loosening during vehicle operation, which can lead to part failure or loss.
- Регулярные проверки: Periodically inspect all screws and fasteners on your Sledge vehicle for tightness, especially after rigorous use.
- Avoid Mixing Hardware: Use only the specified hardware for each application as outlined in your vehicle's manual to maintain structural integrity.
4. Техническое обслуживание
Maintaining your hardware kit and the installed fasteners will prolong their lifespan and ensure reliable performance of your Traxxas Sledge.
- Хранилище: Store unused hardware in its original organized compartments in a dry environment to protect the black oxide coating and prevent corrosion.
- Уборка: If fasteners become dirty during assembly, gently wipe them clean before installation. Avoid using harsh chemicals that could damage the coating.
- Инспекция: Before reuse, inspect any removed hardware for signs of wear, stripping, or corrosion. Replace damaged fasteners with new ones from this kit or genuine Traxxas replacements.
5. Поиск Неисправностей
Encountering issues during hardware installation or use can often be resolved with simple checks.
| Проблема | Возможная причина | Решение |
|---|---|---|
| Hardware does not fit or thread properly. | Incorrect size or type of hardware selected. Damaged threads on vehicle component. | Verify the correct hardware size and type using the kit labels and the Sledge vehicle manual. Inspect threads on the vehicle component for damage; replace if necessary. |
| Screw head strips during tightening. | Incorrect hex driver size. Excessive torque applied. | Ensure the correct size hex driver is used. Apply appropriate torque; avoid over-tightening. Replace stripped screw. |
| Missing hardware from kit. | Packaging error or accidental loss. | Carefully check all compartments. If parts are genuinely missing upon receipt, contact Traxxas customer support. |
6. Технические характеристики
| Спецификация | Деталь |
|---|---|
| Номер модели | 9592 |
| Бренд | Траксас |
| СКП | 020334959201 |
| Вес товара | 0.73 фунта (приблизительно 331 граммов) |
| Размеры изделия (Д x Ш x В) | 6.1 x 3.6 x 1.3 дюйма (прибл. 15.5 x 9.1 x 3.3 см) |
| Покрытие | Черный оксид |
| Совместимость | Traxxas Sledge RC Vehicle |
7. Гарантия и поддержка
Информацию о гарантии на продукцию, возврате товара или технической поддержке можно получить на официальном сайте Traxxas. webсайт или свяжитесь напрямую со службой поддержки клиентов.
Официальный сайт Traxxas Webсайт: https://traxxas.com/support
При обращении в службу поддержки, пожалуйста, подготовьте номер модели вашего продукта (9592) и информацию о покупке.