AMZCNC Hydraulic Crimping Tool HT-1930Blue-U

1. Введение

This manual provides essential instructions for the safe and effective operation, setup, maintenance, and troubleshooting of your AMZCNC HT-1930Blue-U Hydraulic Crimping Tool. Please read this manual thoroughly before using the tool to ensure proper function and to prevent injury or damage.

2. Информация по технике безопасности

ВНИМАНИЕ: Несоблюдение данных инструкций по технике безопасности может привести к серьезным травмам или повреждению имущества.

• Always wear appropriate personal protective equipment (PPE), including safety glasses and gloves, when operating the tool.
• Убедитесь, что рабочее место чистое, хорошо освещенное и свободное от препятствий.
• Do not operate the tool if it is damaged or malfunctioning. Contact customer support for assistance.
• Во время работы держите руки и пальцы подальше от обжимных губок.
• Do not exceed the maximum operating pressure or attempt to crimp materials outside the specified range (16mm, 20mm, 25mm, 32mm U-contour).
• Store the tool in its case in a dry, secure location away from children and unauthorized users.
• Only use original AMZCNC replacement parts and accessories.

3. Продукт закончилсяview

The AMZCNC HT-1930Blue-U is a professional hydraulic crimping tool designed for creating secure connections on composite and plastic pipes using U-contour fittings. It features a robust hydraulic system and interchangeable crimping dies.

3.1 Компоненты

• Hydraulic Crimping Tool Body: Main unit containing the hydraulic pump and handles.
• Crimping Head: Detachable head where the dies are inserted.
• Обжимные матрицы: Interchangeable U-contour dies (16mm, 20mm, 25mm, 32mm).
• Release Valve/Dial: Mechanism to release hydraulic pressure and reset the tool.
• Футляр для переноски: For storage and transport of the tool and accessories.

Figure 1: AMZCNC HT-1930Blue-U Hydraulic Crimping Tool Kit

This image displays the complete AMZCNC HT-1930Blue-U hydraulic crimping tool set, including the main tool, four U-contour crimping dies (16mm, 20mm, 25mm, 32mm), and a sturdy black carrying case for organized storage and transport.

Figure 2: U-Type Crimping Die Compatibility

This table illustrates the different U-type crimping die sizes included (16mm, 20mm, 25mm, 32mm) and their compatibility with various composite and plastic pipe systems. It also shows the resulting crimp contour and an example of a compatible pipe fitting.

Figure 3: Crimping Head Detail

Подробный view of the crimping head, highlighting the robust construction and the mechanism for holding the interchangeable U-contour dies securely during the crimping process.

Figure 4: Hydraulic Release Dial

This image shows the hydraulic release dial, clearly marked for 'Work' and 'Reset' positions. This dial controls the hydraulic pressure, allowing for crimping and releasing the tool after a connection is made.

4. Технические характеристики

5. Настройка

5.1 Распаковка и осмотр

1. Carefully remove the tool and all accessories from the carrying case.
2. Inspect the tool for any signs of damage during shipping. Do not use if damaged.
3. Familiarize yourself with all components as described in Section 3.1.

5.2 Installing Crimping Dies

1. Select the appropriate U-contour crimping die size (16mm, 20mm, 25mm, or 32mm) for your pipe fitting.
2. Ensure the tool's hydraulic pressure is fully released by turning the release dial to the 'Reset' position. The crimping head should be open.
3. Open the crimping head jaws by pulling the release pin or lever (if present) and spreading the jaws.
4. Insert the selected crimping dies into the designated slots within the crimping head. Ensure they are seated correctly and securely.
5. Close the crimping head jaws until they lock into place.

Figure 5: Inserting Crimping Dies

This diagram illustrates the process of opening the crimping head and correctly inserting the U-contour dies into their respective positions before closing the head for operation.

6. Инструкция по эксплуатации

6.1 Подготовка труб и фитингов

1. Cut the pipe to the required length, ensuring a clean, straight cut.
2. Deburr the pipe ends to remove any sharp edges.
3. Slide the pipe fitting onto the pipe, ensuring it is fully seated and aligned.

6.2 Performing a Crimp

1. Ensure the correct crimping dies are installed and the crimping head is securely closed.
2. Turn the hydraulic release dial to the 'Work' position to engage the hydraulic pump.
3. Position the crimping head around the pipe fitting, ensuring the dies are centered over the fitting's crimping collar.

Figure 6: Positioning for Crimp

This image demonstrates the correct placement of a pipe and fitting within the crimping jaws, ensuring the fitting's collar is properly aligned with the U-contour dies before initiating the crimping action.

4. Begin pumping the handles of the tool repeatedly. You will feel resistance as the dies close and apply pressure to the fitting.

Figure 7: Pumping the Handles

This illustration shows the user repeatedly squeezing the tool's handles to activate the hydraulic pump, which gradually closes the crimping dies around the pipe fitting.

5. Continue pumping until the dies are fully closed and the crimp is complete. The tool may make a clicking sound when maximum pressure is reached. Visually inspect the crimp to ensure it is uniform and secure.

6.3 Релеasing the Tool

1. Once the crimp is complete, turn the hydraulic release dial to the 'Reset' position. This will release the hydraulic pressure, allowing the dies to open.
2. Remove the crimped pipe and fitting from the tool.

Рисунок 8: Релятивasing the Crimp

This image depicts the final step of the crimping process, where the hydraulic pressure is released, the dies open, and the securely crimped pipe fitting is removed from the tool.

7. Техническое обслуживание

7.1 Очистка

• After each use, wipe down the tool and dies with a clean, dry cloth to remove any dirt, dust, or debris.
• Ensure the crimping dies are free from any residue that could affect future crimps.

7.2 Смазка

• Periodically apply a light coat of machine oil to the moving parts of the crimping head and the die slots to ensure smooth operation and prevent corrosion.
• Do not over-lubricate, as excess oil can attract dirt.

7.3 Хранение

• Always store the tool and dies in the provided carrying case when not in use.
• Store in a cool, dry place, protected from direct sunlight and extreme temperatures.

8. Поиск Неисправностей

8.1 Incomplete Crimp

• Причина: Insufficient pumping or incorrect die selection.
• Решение: Ensure the handles are pumped until the dies are fully closed and maximum pressure is reached. Verify that the correct die size is used for the fitting.

8.2 Tool Not Releasing

• Причина: Release dial not fully turned to 'Reset' position.
• Решение: Ensure the release dial is completely turned to the 'Reset' position to release hydraulic pressure.

8.3 Утечка масла

• Причина: Seal wear or damage.
• Решение: If oil leakage occurs, discontinue use immediately and contact customer support for repair or replacement. Do not attempt to repair the hydraulic system yourself.

9. Гарантия и поддержка

9.1 Информация о гарантии

The AMZCNC HT-1930Blue-U Hydraulic Crimping Tool comes with a гарантия один год from the date of purchase. This warranty covers manufacturing defects and material faults under normal use. For warranty claims or service, please contact the seller or AMZCNC customer support.

9.2 Поддержка клиентов

For any questions, technical assistance, or to order replacement parts, please refer to the contact information provided by your retailer or visit the official AMZCNC website. Please have your model number (HT-1930Blue-U) and purchase date available when contacting support.