1. Продукт закончилсяview
The Techbee Plug-in Electrical Meter Socket is an advanced device designed to help you monitor and manage your electricity consumption. It provides comprehensive data on various electrical parameters, allowing you to identify energy-intensive appliances and optimize your power usage for energy saving and environmental protection.
Figure 1.1: Techbee Plug-in Electrical Meter Socket Electricity Usage Monitor (Model JK-PM04) with its packaging.
Основные характеристики:
- Energy-saving and Environmental Protection: Measures power consumption and calculates total energy costs for rational electricity planning.
- Multi-functional Monitoring: Offers 11 display modes including power (Watt), total energy used (kWh), carbon emissions (CO₂), voltage (Volt), current (Amp), frequency (Hz), power factor, cost per kWh, minimum power, and maximum power.
- Многоуровневая защита: Features warning indicators (screen flash and LED) for preset power, energy cost, or consumption limits. Default overload limit is 3680W, with a recommendation to set it to 1800W for initial use.
- User-friendly Display: Large, easy-to-read display set at a 45-degree angle for optimal visibility.
- Partial Reset Function: Allows deletion of measurement data without affecting original settings (e.g., cost/kWh).
- Встроенный аккумулятор: Retains settings and measured data even when unplugged.
2. Настройка и первоначальное использование
Follow these steps to set up your Techbee Power Meter:
- Распаковка: Carefully remove the power meter from its packaging.
- Защитная пленка: A transparent protective film is present on the screen. You may remove it for clearer visibility or keep it as preferred.
- Включение питания: Plug the meter directly into a standard electrical wall socket. The display should illuminate. If the screen remains blank or buttons are unresponsive, plugging it into a live socket will resolve the issue as it powers the internal battery and display.
- Initial Overload Setting: The default overload power limit is 3680W. Before using the energy meter, it is recommended to set the overload power to 1800W for general household appliances. Refer to Section 3.2 for instructions on setting alarm thresholds.
- Подключить устройство: Plug the appliance you wish to monitor into the socket on the front of the power meter.
Figure 2.1: The meter features a large display and a built-in battery for convenience.
3. Инструкция по эксплуатации
The Techbee Power Meter features four control buttons: РЕЖИМ, НАБОР, UP, и ВНИЗ.
3.1. Режимы отображения
Нажмите РЕЖИМ button to cycle through the 11 different display modes. Each mode provides specific electrical data:
- Watt / Total Cost: Displays current power consumption in Watts and accumulated cost.
- Total kWh Used: Shows the total kilowatt-hours consumed.
- Carbon Emissions (CO₂): Displays CO₂ emissions based on energy consumption.
- Томtage / Частота: Показывает текущую громкостьtage (V) and frequency (Hz) of the power supply.
- Current / Power Factor: Отображает текущий (Amp) and power factor.
- Cost per kWh: Позволяет устанавливать и viewing the cost per kilowatt-hour.
- Минимальная мощность: Shows the lowest recorded power consumption.
- Максимальная мощность: Shows the highest recorded power consumption.
- Сигнализация перегрузки: Displays the set overload power limit.
- Alarm of kWh: Displays the set kWh alarm limit.
- Alarm of Cost: Displays the set cost alarm limit.
Рисунок 3.1: Болееview of the 11 monitoring modes available on the device.
3.2. Setting Alarm Thresholds and Cost
To set specific values like cost per kWh or alarm limits:
- Нажмите РЕЖИМ button until you reach the desired setting mode (e.g., "Cost per kWh", "Overload Alarm", "Alarm of kWh", or "Alarm of Cost").
- Нажмите НАБОР button. The digit you can adjust will start flashing.
- Используйте UP и ВНИЗ кнопки для настройки значения.
- Нажимать НАБОР again to move to the next digit or to confirm the setting.
- После установки всех цифр нажмите РЕЖИМ для выхода из режима настройки.
Figure 3.2: The device provides visual alarms (flashing LED and screen indicators) when set thresholds are exceeded.
3.3. Сброс данных
The meter allows for partial data reset, which means you can clear accumulated measurement data (like total kWh or total cost) without losing your custom settings (like cost per kWh or alarm thresholds). To reset measurement data, press and hold the ВНИЗ button for approximately 5 seconds until the relevant data clears.
3.4. Monitoring Appliance Consumption
The meter can precisely detect power usage down to 0.5W, allowing you to identify even the tiniest standby power consumption from your devices. This helps in tracking and reducing unnecessary electricity usage across various household appliances.
Figure 3.3: The power meter can be used to track consumption of various household appliances.
4. Техническое обслуживание
To ensure the longevity and accurate performance of your Techbee Power Meter, follow these maintenance guidelines:
- Уборка: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the display or casing.
- Хранилище: Храните измерительный прибор в прохладном, сухом месте, вдали от прямых солнечных лучей и экстремальных температур.
- Аккумулятор: The meter includes a built-in Lithium Metal battery. This battery is not user-replaceable and is designed to retain settings and data when the device is unplugged.
- Избегайте попадания влаги: Do not expose the device to water or high humidity. It is designed for indoor use only.
5. Поиск Неисправностей
If you encounter any issues with your Techbee Power Meter, refer to the following common problems and solutions:
| Проблема | Возможная причина | Решение |
|---|---|---|
| Screen is blank or buttons are unresponsive. | Meter is not receiving power or internal battery needs charging. | Plug the meter into a live electrical socket. This will power the unit and charge the internal battery. |
| Дисплей плохо читается. | Lack of backlight in low-light conditions. | Use a flashlight to illuminate the screen for better visibility. Ensure adequate ambient lighting. |
| Overload alarm activates frequently. | Connected appliance exceeds the set overload limit. | Reduce the load on the circuit or adjust the overload limit if appropriate (refer to Section 3.2). Ensure the total wattage does not exceed the meter's maximum capacity (15A). |
| Data not resetting correctly. | Неправильная процедура сброса. | Убедитесь, что вы нажимаете и удерживаете кнопку. ВНИЗ button for approximately 5 seconds to perform a partial reset. |
6. Технические характеристики
| Особенность | Спецификация |
|---|---|
| Номер модели | JK-PM04 |
| Вес товара | 5.9 унции |
| Размеры упаковки | 6.73 x 3.23 x 2.52 дюйма |
| Источник питания | Проводной электрический |
| Точность измерения | ±2% |
| Включенные компоненты | Ваттметр |
| Тип батареи | 1 литий-металлическая батарея (входит в комплект) |
| Производитель | Shen Zhen He Yi Ke Ji You Xian Gong Si |
| Дата первой доступности | 16 июля 2023 г. |
7. Гарантия и поддержка
Techbee stands behind the quality of its products. This product comes with a Гарантия 1 год с даты покупки.
For any questions, technical assistance, or warranty claims, please contact Techbee customer service. We offer lifetime customer service to ensure your satisfaction with our products.
You can find more information and support resources by visiting the official Techbee store: Techbee Store on Amazon.