GreenYi AHD Monitor Camera System User Manual

1. Введение

This manual provides comprehensive instructions for the installation, operation, and maintenance of your GreenYi AHD Monitor Camera System. This system includes a 5-inch AHD TFT LCD monitor and a universal 720P camera, designed to enhance vehicle safety by providing clear visual assistance for rear, front, or side views. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Информация по технике безопасности

Observe the following safety precautions to prevent damage to the product and ensure safe operation:

• Ensure all power connections are secure and correctly polarized to avoid electrical shorts.
• Disconnect the vehicle's battery before performing any wiring to prevent electrical hazards.
• Не загораживайте дорогу водителю. view or interfere with vehicle controls during installation.
• Avoid installing the monitor or camera in locations exposed to extreme temperatures or direct sunlight for prolonged periods.
• This system is an aid to driving and does not replace the driver's responsibility for safe operation and awareness of surroundings.

3. Содержимое упаковки

Убедитесь, что все перечисленные ниже предметы включены в ваш пакет:

Рисунок 3.1: Надview всех входящих в комплект компонентов.

Monitor Package:

• 1 x 5-inch AHD 800x480 Car TFT LCD Monitor
• 1 x Адаптер питания для прикуривателя
• 1 x Dashboard Mounting Bracket
• 1 x Windshield Suction Cup Mounting Bracket
• 1 x 5FT Power Cable (for monitor)
• 1 x User Manual (for monitor)
• 1 x RCA Video Coupler

Camera Package:

• 1 x HD 720P Backup Camera
• 1 x 26FT Double Shielded Video Cable
• 1 x 5FT Power Cable (for camera)
• 1 x Metal Holder set
• 1 x Accessory Bag for Metal Holder
• 1 x Silicone Holder
• 1 x Accessory Bag for Silicone Holder
• 1 x User Manual (for camera)
• 1 липких лент
• 1 x Инструмент для снятия
• 5 x Zip Ties
• 5 x Провод Clamps
• 1 x Mini Screwdriver
• 1 x RCA Male to Male Coupler
• 1 x RCA Female to Female Coupler
• 1 x Electric Adhesive Tape
• 2 x T-tap Sets

4. Технические характеристики продукта

Технические характеристики монитора:

Характеристики камеры:

5. Настройка и установка

5.1 Установка монитора

The monitor can be installed using either the dashboard mounting bracket or the windshield suction cup mounting bracket.

1. Выберите место: Выберите место на приборной панели или лобовом стекле, которое не будет загораживать обзор. view или вмешиваться в управление транспортным средством.
2. Прикрепите кронштейн:
   • For dashboard mount: Secure the dashboard bracket to the desired surface using the adhesive pad or screws (not included).
   • For suction cup mount: Press the suction cup firmly against a clean, smooth windshield surface and engage the locking lever.
3. Монтировать монитор: Attach the monitor to the chosen bracket. Adjust the angle for optimal viewинж.
4. Подключение питания: Connect the monitor's power cable to the cigarette lighter adapter or directly to a 12-30V DC power source in your vehicle.

Рисунок 5.1: Monitor and camera components.

5.2 Установка камеры

The camera offers versatile installation options for front, rear, or side views. Use the provided metal or silicone holders.

Рисунок 5.2: Examples of camera installation positions.

1. Select Mounting Position: Choose a suitable location (e.g., license plate area for rear view, grille for front view, under side mirror for side view).
2. Прикрепить держатель: Secure the metal or silicone holder to the chosen surface using screws or adhesive tape.
3. Крепление камеры: Insert the camera into the holder.
4. Отрегулируйте угол: Use the mini screwdriver to adjust the camera's lens angle (360-degree rotatable body) for the desired viewперспектива.
   

   Рисунок 5.3: Camera angle adjustment.

5.3 Схема электропроводки

Follow the wiring diagram carefully to connect the camera to the monitor and vehicle power supply.

Рисунок 5.4: Wiring connections for the camera system.

• Connect the 4-pin camera cable to the provided 26FT Double Shielded Video Cable.
• Connect the video cable's RCA end to the monitor's video input. The yellow plug is typically for the rear view камера.
• Connect the camera's 5FT power cable:
  • Красный провод: Connect to a 12-24V DC power source (e.g., reversing light positive, brake light positive, turning light positive, or ACC).
  • Черный провод: Connect to vehicle ground (GND).
• If connecting to a head unit with a trigger wire, connect the trigger wire (usually labeled "Reverse" or "Back") from the head unit to the reversing light positive.
• Ensure all connections are secure and insulated using the provided electrical adhesive tape and zip ties.

Примечание: All 4-pin cameras require the use of the provided power cable for connection to any monitor.

6. Операция

6.1 Работа монитора

The monitor will automatically power on and display the camera feed when the connected power source (e.g., reverse gear) is activated.

Рисунок 6.1: Задний монитор view with menu controls.

Use the buttons on the back of the monitor to access and adjust settings:

• Кнопка меню: Press to enter the menu and navigate through options.
• Кнопки вверх / вниз: Use to adjust values or select menu items.
• Доступные настройки: Brightness, Contrast, Saturation, Tint, Language, Mode, Reset.

6.2 Функции камеры

The camera offers customizable features via switcher cables:

Рисунок 6.2: Camera feature switcher cables.

• Белый кабель: Cut this cable to switch between mirror (rear view, default) and non-mirror (front view) image display.
• Оранжевый кабель: Cut this cable to switch between CVBS and AHD video signal output. Ensure this matches your monitor's input capability.
• Зелёный кабель: Cut this cable to toggle parking guidelines ON or OFF.

Примечание: Perform these cable modifications before final installation and power connection.

Рисунок 6.3: Camera fisheye lens with 170-degree viewугол наклона.

The camera features a 170-degree wide viewing angle fisheye lens, designed to cover a broad area and minimize blind spots.

7. Техническое обслуживание

• Уборка: Используйте мягкий, damp Для протирки экрана монитора и объектива камеры используйте тряпку. Избегайте абразивных чистящих средств или растворителей.
• Проверка кабеля: Periodically check all cables and connections for wear, damage, or loose contacts.
• Четкость объектива: Ensure the camera lens remains free of dirt, mud, snow, or ice to maintain clear image quality.
• Монтаж безопасности: Verify that the monitor and camera mounts are secure and have not loosened over time due to vehicle vibrations.

8. Поиск Неисправностей

9. Гарантия и поддержка

For warranty information and technical support, please refer to the specific warranty card included in your product package or contact GreenYi customer service directly. Keep your purchase receipt as proof of purchase.

Контактная информация: Please visit the official GreenYi webДля получения поддержки обратитесь на сайт или по контактным данным, указанным на упаковке вашего продукта.