Andoer Professional Portable Aluminum Camera Tripod Stand Monopod

Введение

Thank you for choosing the Andoer Professional Portable Aluminum Camera Tripod Stand Monopod. This versatile 2-in-1 device is designed to provide stable support for your DSLR or SLR camera, featuring a 4-section adjustable design, an 8KG payload capacity, and a 3-way hydraumatic pan tilt head. This manual provides detailed instructions for proper setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your equipment.

Информация по безопасности

• Ensure all locks and adjustments are securely tightened before mounting a camera or leaving the tripod unattended.
• Do not exceed the maximum load capacity of 8KG (17.6 lbs) to prevent damage to the tripod and your camera equipment.
• Avoid placing the tripod on unstable or uneven surfaces.
• Keep hands and fingers clear of moving parts, especially when extending or collapsing the legs.
• Do not expose the tripod to extreme temperatures or corrosive environments.
• When carrying the tripod, ensure it is fully collapsed and secured in its carrying pouch.

Продукт болееview и компоненты

Familiarize yourself with the main components of your Andoer tripod/monopod:

Изображение: Подробный view of the Andoer tripod highlighting its key components such as the 3-way hydraulic dampening head, quick release plate, carrying strap, rotating handle with sponge, soft grip sponge, tube angle lock, aluminum alloy tube with flip locks, hanging hook, and sturdy rubber feet.

• 3-way Hydraulic Dampening Head: Allows for smooth pan, tilt, and flip adjustments.
• Быстросъемная пластина: For fast attachment and detachment of your camera.
• Ремень для переноски: Для удобной транспортировки.
• Rotating Handle with Sponge: Provides comfortable grip for head adjustments.
• Soft Grip Sponge: Located on one leg for comfortable handling, especially in cold weather.
• Tube Angle Lock: To adjust the spread angle of the tripod legs.
• Aluminum Alloy Tube with Flip Locks: For extending and securing leg sections.
• Крючок для подвешивания: Located at the bottom of the center column for adding weight for increased stability.
• Sturdy Rubber Feet: Обеспечивает устойчивость на различных поверхностях.

Настраивать

1. Раскладывание штатива

1. Release the leg locks and extend the tripod legs outwards.
2. Adjust the leg spread using the tube angle locks located at the top of each leg. There are 3 levels of adjustment for different stability requirements and shooting angles.
3. Ensure all leg angle locks click into place for secure positioning.

2. Adjusting Leg Sections and Height

Изображение: The tripod shown at different heights, demonstrating its adjustable 4-section legs and extendable center column, reaching up to 200cm.

1. Open the flip locks on each leg section.
2. Выдвиньте секции ножек на желаемую высоту.
3. Securely close all flip locks to prevent the legs from collapsing.
4. To extend the center column, loosen the center column lock knob, raise the column to the desired height, and then tighten the knob.

3. Крепление камеры

1. Remove the quick release plate from the 3-way pan tilt head by releasing its lock.
2. Attach the quick release plate to the bottom of your camera using the 1/4-inch screw. Ensure it is tightened securely.
3. Slide the camera with the attached quick release plate back into the head and secure it with the quick release lock. Verify that the camera is firmly attached before use.

Инструкция по эксплуатации

1. Adjusting the 3-Way Pan Tilt Head

Изображение: Visual representation of the tripod head's movement capabilities, including 360-degree horizontal panning, +90 to -70 degree vertical tilting, and 90-degree side flipping for portrait orientation.

• Панорамирование (горизонтальное вращение): Loosen the pan lock knob (usually at the base of the head) to rotate the camera 360 degrees horizontally. Tighten to secure.
• Tilting (Vertical Adjustment): Loosen the tilt lock knob on the side of the head to adjust the camera's vertical angle (+90 to -70 degrees). Tighten to secure.
• Flipping (Portrait Orientation): Loosen the flip lock knob to tilt the camera 90 degrees for portrait shooting. Tighten to secure.

2. Macro Shooting (Inverted Center Column)

Изображение: The tripod configured for macro shooting, demonstrating how the center column can be inverted to allow the camera to be positioned very close to the ground for low-angle shots.

1. Remove the camera and head from the center column.
2. Fully extend the center column and remove it from the tripod body.
3. Invert the center column and reinsert it into the tripod body from the bottom.
4. Reattach the head and camera. This allows for extremely low-angle or macro photography.

3. Преобразование в монопод

Изображение: The tripod and its monopod configuration. One leg of the tripod, identifiable by its soft grip sponge, can be detached and combined with the center column to create a standalone monopod.

1. Identify the tripod leg with the soft grip sponge. This leg is detachable.
2. Открутите эту ножку от шасси штатива.
3. Снимите центральную колонну со штатива.
4. Прикрутите отсоединенную ножку к нижней части центральной колонны.
5. Attach the 3-way pan tilt head to the top of the newly formed monopod.

Обслуживание

Изображение: The tripod in its folded state, ready for storage or transport in the included carrying bag.

• Уборка: Протрите штатив мягкой тряпкой.amp cloth after each use, especially if used in dusty, sandy, or wet conditions. Avoid harsh chemicals.
• Смазка: Periodically check moving parts. If any part feels stiff, apply a small amount of silicone-based lubricant. Do not over-lubricate.
• Хранилище: Store the tripod in its carrying pouch in a dry, cool place away from direct sunlight and extreme temperatures. Ensure it is clean and dry before storage.
• Инспекция: Regularly inspect all screws, locks, and rubber feet for wear and tear. Replace any damaged parts immediately.

Поиск неисправностей

• Штатив неустойчив: Ensure all leg section flip locks are securely closed and leg angle locks are engaged. Check that the quick release plate is firmly attached to the camera and head. Consider hanging weight from the center column hook for added stability.
• Секции ног не выдвигаются/не убираются плавно: Clean the leg sections to remove any dirt or debris. Apply a small amount of silicone lubricant if necessary.
• Head movement is stiff or loose: Check the tension of the pan, tilt, and flip lock knobs. Adjust them to achieve the desired resistance. If still stiff, clean around the joints.
• Камера трясется на голове: Ensure the quick release plate is tightly screwed onto the camera and securely locked into the tripod head.

Технические характеристики

Гарантия и поддержка

For warranty information or technical support, please refer to the documentation included with your purchase or contact Andoer customer service through their official webНа сайте или в магазине, где был приобретён товар. Сохраните чек на случай предъявления гарантийных претензий.