AtGames Arcade Control Panel (Model HAA290) Instruction Manual

1. Введение

The AtGames Arcade Control Panel is designed as a direct drop-in upgrade for the Legends Pinball (HA8819, HA8820 series) arcade machine. This accessory enhances your Legends Pinball experience by integrating arcade-quality joystick and trackball controls, expanding its functionality for a wider range of arcade and console gaming.

This manual provides essential information for the proper installation, operation, and maintenance of your Arcade Control Panel. Please read it thoroughly before use.

2. Информация по технике безопасности

Please observe the following safety guidelines to ensure safe operation and prevent damage to the product or injury:

• Keep the control panel away from water or excessive moisture.
• Не подвергайте устройство воздействию прямых солнечных лучей или экстремальных температур.
• Do not attempt to disassemble or modify the control panel. This may void the warranty and cause damage.
• Ensure the Legends Pinball machine is powered off and unplugged before installation.
• Handle with care to avoid dropping or impacting the unit.

3. Содержимое упаковки

Проверьте наличие всех предметов в упаковке:

• Arcade Control Panel with Joystick and Trackball

4. Настройка и установка

The Arcade Control Panel is designed for easy, plug-and-play installation into your Legends Pinball machine. Follow these steps:

1. Выключение: Ensure your Legends Pinball machine is completely powered off and unplugged from the electrical outlet.
2. Найти слот: Identify the designated slot on your Legends Pinball machine where the control panel will be installed. This is typically at the front, above the main control buttons.
3. Insert Control Panel: Carefully align the Arcade Control Panel with the slot and gently lower it into place. The design allows for a secure, drop-in fit.
4. Соединительные кабели: Connect any necessary cables from the control panel to the Legends Pinball machine. The system is designed for plug-and-play functionality, so connections should be straightforward.
5. Надежная защита (если применимо): If your Legends Pinball machine or the control panel includes screws or latches for securing, ensure these are fastened to prevent movement during use.
6. Включение питания: Once the control panel is securely installed, plug in and power on your Legends Pinball machine. The system should automatically detect the new control panel.

5. Инструкция по эксплуатации

Once installed, the Arcade Control Panel provides enhanced input for your Legends Pinball machine, enabling a broader range of gaming experiences.

• Джойстик: Use the 8-way joystick for directional control in arcade games.
• Кнопки действий: The array of buttons (typically labeled A, B, C, X, Y, Z, etc.) are used for various in-game actions, depending on the specific game being played.
• Трекбол: The trackball provides precise cursor control or specific game mechanics that utilize rolling input.
• Системная интеграция: The control panel fully integrates with the Legends Arcade Platform, allowing access to its entire range of gameplay features and compatible titles.

Refer to the specific game instructions or the Legends Pinball machine's main manual for detailed control schemes for individual games.

6. Техническое обслуживание

To ensure the longevity and optimal performance of your Arcade Control Panel, follow these simple maintenance guidelines:

• Уборка: Use a soft, dry cloth to wipe down the surface of the control panel. For stubborn smudges, a slightly damp Для чистки можно использовать ткань, смоченную мягким мылом, после чего ткань следует немедленно высушить. Избегайте абразивных чистящих средств или растворителей.
• Предотвращение образования пыли: Keep the control panel covered when not in use to prevent dust accumulation, especially around the joystick and trackball mechanisms.
• Очистка трекбола: If the trackball's movement becomes sluggish, gently remove the trackball (if designed for user removal) and clean any dust or debris from its rollers and housing with a cotton swab.

7. Поиск Неисправностей

If you encounter issues with your Arcade Control Panel, try the following troubleshooting steps:

• Нет ответа:
  • Ensure the Legends Pinball machine is powered on.
  • Verify that the control panel is correctly seated in its slot and all connections are secure.
  • Try restarting the Legends Pinball machine.
• Buttons/Joystick/Trackball Not Working:
  • Проверьте наличие каких-либо физических препятствий.
  • Ensure the game you are playing supports the specific input (e.g., not all games use the trackball).
  • If only specific buttons are unresponsive, inspect for debris or damage.
• Haptic Feedback Issues (if applicable): Some users report issues with haptic feedback. If you experience excessive buzzing or rattling, ensure the control panel is firmly seated and consider consulting online communities or the manufacturer for potential solutions or adjustments.

Если после выполнения этих действий проблемы сохраняются, обратитесь в службу поддержки клиентов.

8. Технические характеристики

9. Гарантия и поддержка

For warranty information and technical support, please refer to the official AtGames webили обратитесь в службу поддержки напрямую. Сохраните чек в качестве подтверждения покупки.

AtGames Official Webсайт: www.atgames.net