Lorex Home Security Smart Sensor Starter Kit User Manual

1. Продукт закончилсяview

The Lorex Home Security Smart Sensor Starter Kit provides essential home security without relying solely on video monitoring. This kit allows you to receive alerts when motion is detected or when a door or window is opened, enhancing your privacy while maintaining security. The system is managed through the Lorex Home mobile application and can be expanded with additional sensors.

Image: The complete Lorex Smart Sensor Starter Kit, including the circular Sensor Hub, the larger motion sensor, and two smaller window/door sensors.

2. Что включено

Your Lorex Home Security Smart Sensor Starter Kit includes the following components:

• 1 x Lorex Sensor Hub (AY41TR)
• 1 x PIR (Passive Infrared) Motion Sensor (AM41TK)
• 2 x Window/Door Sensors (AK41TK)

3. Руководство по установке

Follow these steps to set up your Lorex Smart Sensor Starter Kit.

3.1. Lorex Sensor Hub Setup

1. Включение питания: Connect the Sensor Hub to a power outlet using the provided power adapter. The LED indicator on the hub will illuminate.
2. Подключение к сети: Ensure your Sensor Hub is connected to your home Wi-Fi network. Refer to the Lorex Home app for detailed instructions on connecting the hub to your network.

Image: The Lorex Sensor Hub, featuring a central button with a blue LED ring, indicating its status.

3.2. PIR Motion Sensor Setup

1. Установка аккумулятора: Open the battery compartment of the motion sensor and insert the required battery (CR2450). Ensure correct polarity.
2. Монтаж: Choose a suitable location for the motion sensor, typically in a corner or on a wall, where it can cover the desired area. Use the included mounting hardware or adhesive strips for installation. Avoid placing it near heat sources or direct sunlight.
3. Сочетание: Follow the instructions in the Lorex Home app to pair the motion sensor with your Sensor Hub. This usually involves pressing a button on the sensor to initiate pairing mode.

Image: The Lorex PIR Motion Sensor, a compact white unit with a prominent black infrared lens for detecting movement.

3.3. Window/Door Sensor Setup

1. Установка аккумулятора: Open the battery compartment of each window/door sensor and insert the required battery (CR1632). Ensure correct polarity.
2. Монтаж: Mount the two parts of the sensor (main sensor and magnet) on a window or door frame. The two parts must be aligned and within 1 cm (0.4 inches) of each other when the window/door is closed. Use the included adhesive strips or screws.
3. Сочетание: Follow the instructions in the Lorex Home app to pair each window/door sensor with your Sensor Hub. This typically involves pressing a button on the sensor to initiate pairing mode.

Image: A pair of Lorex Window/Door Sensors, consisting of a main sensor unit and a smaller magnetic contact, designed to detect opening and closing.

3.4. Lorex Home App Pairing

1. Скачать приложение: Download the Lorex Home app from your device's app store (available for Android and iPhone).
2. Зарегистрироваться: Open the app and create a Lorex account or log in if you already have one.
3. Добавить устройство: Follow the in-app prompts to add your Sensor Hub and then each individual sensor. The app will guide you through the pairing process for each component.

4. Инструкция по эксплуатации

Once your sensors are set up and paired, you can manage your security system through the Lorex Home app.

4.1. Security Modes

The Lorex Home app allows you to customize your monitoring with different security modes:

• Домашний режим: Typically arms perimeter sensors (e.g., window/door sensors) while allowing free movement inside.
• В гостях режим: Fully arms all sensors, including motion sensors, for comprehensive protection when no one is home.
• Режим снятия с охраны: All sensors are inactive, allowing unrestricted movement without triggering alerts.

You can configure which sensors are active in each mode via the app settings.

4.2. Уведомления

The Lorex Home app provides instant push notifications to your smartphone when a sensor is triggered. You can customize notification settings for each sensor and mode within the app.

4.3. Integration with Lorex Devices

The Smart Sensor Starter Kit can be used as a standalone system or integrated with select Lorex DVRs, NVRs, and standalone WiFi cameras. This allows for advanced functionalities such as triggering camera recordings or pan/tilt movements upon sensor activation. Refer to your Lorex camera or recorder manual for specific integration steps.

5. Техническое обслуживание

5.1. Замена батареи

The motion sensor and window/door sensors are battery-powered. When battery levels are low, you may receive notifications via the Lorex Home app. Replace batteries promptly to ensure continuous operation:

• Датчик движения: Requires 1 x CR2450 battery.
• Датчик окна/двери: Requires 1 x CR1632 battery per sensor.

Для оптимальной работы всегда используйте свежие, высококачественные батарейки.

5.2. Уборка

Wipe the sensors and hub periodically with a soft, dry cloth to remove dust and dirt. Do not use liquid cleaners or abrasive materials, as these can damage the devices.

6. Поиск Неисправностей

If you encounter issues with your Lorex Smart Sensor Starter Kit, try the following troubleshooting steps:

• Датчики не реагируют:
  • Проверьте уровень заряда батареи и при необходимости замените.
  • Ensure the sensor is within range of the Sensor Hub.
  • Re-pair the sensor with the Sensor Hub via the Lorex Home app.
• Нет уведомлений:
  • Verify push notifications are enabled for the Lorex Home app in your phone's settings.
  • Check the security mode in the Lorex Home app to ensure the sensor is armed.
  • Ensure your Sensor Hub has a stable internet connection.
• Sensor Hub Offline:
  • Check the power connection to the Sensor Hub.
  • Verify your home Wi-Fi network is active and the hub is connected.
  • Restart the Sensor Hub by unplugging and re-plugging it.
• Ложные тревоги:
  • For motion sensors, ensure it is not placed near heat vents, direct sunlight, or areas with pets that might trigger it.
  • For window/door sensors, ensure the two parts are securely mounted and do not shift, causing false triggers.

Для получения дополнительной помощи обратитесь в службу поддержки Lorex. webсайт или свяжитесь со службой поддержки клиентов.

7. Технические характеристики

8. Гарантия и поддержка

For information regarding warranty coverage, technical support, and frequently asked questions, please visit the official Lorex support webОбратитесь на сайт или напрямую в службу поддержки клиентов Lorex. Сохраните чек о покупке для предъявления гарантийных претензий.