iGPSPORT M80 Bike Computer Mount Instruction Manual

1. Введение

Thank you for choosing the iGPSPORT M80 Bike Computer Mount. This mount is designed to securely hold your iGPSPORT or Garmin cycle computer, providing a stable and optimal viewing position during your rides. Constructed from a durable nylon-glass fiber composite, it offers lightweight strength and shock resistance, ensuring your device remains stable even on challenging terrain.

The iGPSPORT M80 also supports the attachment of additional accessories, such as cameras or headlights, when used with the separately available S81 adapter.

2. Информация по технике безопасности

• Ensure the mount is securely fastened to your bicycle handlebars before each ride. A loose mount can lead to your device falling off, potentially causing damage or injury.
• Do not overtighten screws, as this may damage the mount or your handlebars.
• Periodically check all screws and connections for tightness, especially after riding on rough surfaces.
• Убедитесь, что установленное устройство не мешает view of the road or interfere with the operation of your bicycle's controls (brakes, shifters).
• Keep the mount clean and free from debris.

3. Содержимое упаковки

Проверьте наличие всех предметов в посылке:

• 1 x iGPSPORT M80 Bike Computer Mount
• 1 x 2.5mm Hex Wrench (for installation)

Изображение: Спереди view of the iGPSPORT M80 product packaging, showing the brand logo and model number.

Изображение: сбоку view of the iGPSPORT M80 product packaging, displaying the 'Out-Front Bike Mount' description.

Изображение: Назад view of the iGPSPORT M80 product packaging, detailing official website, manufacturer, and contact information.

4. Настройка и установка

1. Определите диаметр руля: The iGPSPORT M80 mount is compatible with handlebars that have a 31.8mm diameter. Ensure your handlebar matches this specification.
2. Расположите крепление: Откройте классamp of the M80 mount and place it around your bicycle's handlebar in the desired out-front position. Ensure the mount is centered and aligned correctly.
3. Закрепите крепление: Use the provided 2.5mm hex wrench to tighten the screw on the mount's clamp. Tighten until the mount is firm and does not rotate freely, but avoid overtightening.
4. Attach Your Cycle Computer: Align your iGPSPORT or Garmin cycle computer with the mount's interface and twist it clockwise until it locks securely into place.
5. Optional Accessory Installation (S81 Adapter): If you wish to attach a camera or headlight, first install the iGPSPORT S81 adapter (sold separately) to the underside of the M80 mount. Then, attach your accessory to the S81 adapter.

Image: The iGPSPORT M80 mount installed on a bicycle handlebar with a cycle computer, illustrating its sunken design for optimal angle and low wind resistance.

Изображение: Крупный план view of the iGPSPORT M80 mount securely attached to a bicycle handlebar, ready for a cycle computer.

5. Инструкция по эксплуатации

• Attaching a Cycle Computer: Align the tabs on your cycle computer with the slots on the M80 mount. Push down gently and twist the computer clockwise until it clicks into place.
• Detaching a Cycle Computer: To remove your cycle computer, twist it counter-clockwise until it disengages from the mount, then lift it off.
• Using Optional Accessories: If the S81 adapter is installed, attach your camera or headlight according to the accessory's specific instructions. Ensure it is firmly secured to the adapter.

6. Техническое обслуживание

• Уборка: Протрите крепление с рекламойamp cloth to remove dirt and grime. Avoid using harsh chemicals or abrasive cleaners, which can damage the material.
• Инспекция: Regularly inspect the mount for any signs of wear, cracks, or damage. Check the integrity of the mounting interface and the handlebar clamp.
• Затяжка винтов: Периодически проверяйте плотность затяжки зажима.amp screw using the 2.5mm hex wrench. Re-tighten if necessary to maintain a secure fit.
• Хранилище: Если крепление не используется в течение длительного времени, храните его в прохладном, сухом месте, вдали от прямых солнечных лучей.

7. Поиск Неисправностей

• Mount is loose on handlebars: Ensure the handlebar diameter is 31.8mm. Re-tighten the clamp screw with the 2.5mm hex wrench until secure. Do not overtighten.
• Cycle computer does not fit or is loose: Verify that your cycle computer is compatible with iGPSPORT/Garmin quarter-turn mounts. Ensure it is properly aligned and twisted clockwise until it locks.
• Accessory (camera/headlight) does not fit: Ensure you are using the iGPSPORT S81 adapter (sold separately) for accessory attachment. Check the accessory's compatibility with the S81 adapter.

8. Технические характеристики

Image: Diagram illustrating the iGPSPORT M80 mount's weight (49g), applicable pipe diameter (31.8mm), and extension length (85mm).

Image: Graphic highlighting the high strength of the iGPSPORT M80 mount, indicating it is 76% stronger compared to the iGPSPORT S80 model.

9. Гарантия и поддержка

For warranty information and customer support, please refer to the official iGPSPORT webсайт или свяжитесь напрямую со службой поддержки.

• Официально Webсайт: www.igpsport.com
• Поддержка по электронной почте: service@igpsport.com