ATOMSTACK P9 M50 10W Laser Engraver User Manual

1. Информация по технике безопасности

Operating a laser engraver requires strict adherence to safety guidelines to prevent injury. Always read and understand all safety instructions before use.

Защита глаз

The ATOMSTACK P9 M50 features a panoramic filter glass protective cover designed to filter 97% of ultraviolet light. This allows you and those nearby to observe the laser engraving process without needing additional protective eyewear. However, it is always recommended to exercise caution and avoid direct eye exposure to the laser beam.

Image: The panoramic filter glass effectively blocks laser light, protecting your eyes during operation.

Emergency Controls

The machine is equipped with an independent operation terminal that includes essential safety buttons:

• Кнопка аварийной остановки: Immediately halts all machine operations. To restart, turn the button in the indicated direction to unlock it.
• Кнопка выключения: Terminates the current operation and cuts off all power to the machine.
• Кнопка сброса: Stops the current operation, closes the control terminal, and restarts the system.

Image: The independent control terminal showing the Emergency Stop, Shutdown, and Reset buttons for safe operation.

Общие меры предосторожности

• Always operate the laser engraver in a well-ventilated area to dissipate fumes and smoke.
• Держите поблизости огнетушитель.
• Не оставляйте машину без присмотра во время работы.
• Убедитесь, что рабочая зона свободна от легковоспламеняющихся материалов.
• Держите детей и домашних животных подальше от работающего оборудования.

2. Компоненты продукта

The ATOMSTACK P9 M50 Laser Engraver comes with several key components designed for efficient and precise engraving and cutting.

Изображение: Оверview of the ATOMSTACK P9 M50 Laser Engraver, highlighting its main features including the 10W laser power and eye protection.

Основные компоненты

• Laser Engraver Unit: The primary frame and moving parts that house the laser module.
• Лазерный модуль: The 10W fixed-focus laser with an ultra-fine spot size of 0.06 x 0.06 mm.
• Independent Control Terminal: A separate unit for offline operation, featuring a touch screen and control buttons.
• Support Blocks: Four adjustable blocks to increase the machine's height for specific engraving tasks or when using a rotary roller.

Image: The Atomstack P9 M50 Independent Control Terminal, enabling offline engraving and touch operation.

Image: The four included support blocks, used to elevate the machine for various engraving and cutting applications.

3. Настройка

Follow these steps to assemble and prepare your ATOMSTACK P9 M50 Laser Engraver for its first use.

Сборка

The P9 M50 features a fully modular design for quick and easy assembly. Most users can complete the assembly process within 10-20 minutes. Ensure all components are securely fastened according to the detailed instructions provided in the separate assembly guide.

The four support blocks can be used to increase the machine's height, which is beneficial for engraving larger objects or when integrating a rotary roller for cylindrical items. Using three auxiliary installations ensures the X-axis and Y-axis maintain a horizontal plane for ideal engraving results.

Установка программного обеспечения

The ATOMSTACK P9 M50 is compatible with various mature engraving software, including LaserGRBL (free) and LightBurn (paid, with a trial period). These software options support multiple operating systems:

• Окна: Compatible with Win XP, Win 7, Win 8, Win 10.
• Мак: Supported by LightBurn.

Поддерживается file formats include NC, BMP, JPG, PNG, and DXF.

Image: The laser engraver connected to a computer running LaserGRBL or LightBurn software, demonstrating software compatibility.

4. Операция

The ATOMSTACK P9 M50 offers flexible operation modes for your engraving and cutting projects.

Автономная работа

The independent control terminal allows you to operate the engraver without connecting it to a computer. This provides convenience and portability for your projects.

Процесс гравировки и резки

The enhanced dual compression spot technology reduces the laser focus area to an ultra-fine 0.06 x 0.06 mm. With a 10W laser output, the machine can efficiently cut through materials such as 20mm thick wood and 15mm thick acrylic. It can also directly engrave on mirror stainless steel, ceramics, and glass. The engraving and cutting speed is up to 40% higher than common laser engravers.

Image: The ATOMSTACK P9 M50 demonstrating its capability to cut 20mm thick wood with precision, resulting in smooth edges.

Achieving Fine Details

The ultra-fine laser spot enables high-resolution image engraving, capturing intricate details in your designs.

Image: A detailed tiger portrait engraved on wood, illustrating the precision achieved with the ultra-fine laser spot.

Engraving Exampле

Image: A collection of diverse projects, including engravings on wood, leather, and metal, demonstrating the versatility of the ATOMSTACK P9 M50.

Video Demonstration (Not Available)

No official product videos with 'Seller' creator type and m3u8 format were found in the provided data. Therefore, no video demonstration can be embedded at this time.

5. Техническое обслуживание

Regular maintenance ensures the longevity and optimal performance of your ATOMSTACK P9 M50 Laser Engraver.

Cleaning the Laser Lens

• Periodically inspect the laser lens for dust, debris, or residue.
• Use a soft, lint-free cloth and a small amount of lens cleaning solution (specifically designed for optical lenses) to gently wipe the lens.
• Avoid using abrasive materials or excessive force, as this can scratch or damage the lens.

Очистка корпуса машины

• Wipe down the machine's frame and surfaces with a damp cloth to remove dust and engraving residue.
• Перед началом чистки убедитесь, что устройство выключено и отсоединено от сети.

Смазка

• Occasionally apply a small amount of lubricant to the guide rails and moving parts to ensure smooth operation. Refer to the full product manual for specific lubrication points and recommended lubricants.

6. Поиск Неисправностей

This section provides solutions to common issues you might encounter with your ATOMSTACK P9 M50 Laser Engraver.

Распространенные проблемы и решения

• Машина не включается: Check all power connections. Ensure the power adapter is securely plugged into both the machine and a working electrical outlet.
• Лазер не работает: Verify that the laser module is correctly installed and connected. Check software settings to ensure the laser power is not set to zero.
• Engraving/Cutting quality is poor:
  • Ensure the material is properly focused. The P9 M50 has a fixed focus, so ensure the material is at the correct distance from the laser head.
  • Adjust laser power and speed settings in your software for the specific material being used.
  • Если линза лазера загрязнена, очистите её.
• Устройство не подключается к программному обеспечению:
  • Убедитесь, что USB-кабель надежно подключен.
  • Установите необходимые драйверы для вашей операционной системы.
  • Перезагрузите компьютер и сам компьютер.

If you encounter any persistent issues that cannot be resolved using these tips, please contact our professional after-sales engineering team for assistance.

7. Технические характеристики

8. Гарантия и поддержка

Информация о гарантии

Пожалуйста, обратитесь к официальному ресурсу ATOMSTACK. website or your purchase documentation for detailed warranty terms and conditions. Warranty coverage typically includes manufacturing defects and component failures under normal use.

Поддержка клиентов

For any technical issues, operational questions, or warranty claims, our professional after-sales engineering team is available to provide support. You can reach them through the contact information provided on the ATOMSTACK official webили через каналы поддержки вашего продавца.

When contacting support, please have your product model (P9 M50) and a detailed description of the issue ready to facilitate a quicker resolution.