KETOTEK KT3100 Разъем цифрового термостата

1. Введение

The KETOTEK KT3100 is a versatile digital thermostat plug designed for precise temperature control in various applications. It features a 3-meter external NTC10K/B3950 temperature sensor, supporting both heating and cooling modes. With a wide temperature control range of -40°C to 120°C, timing functions, temperature calibration, memory, and reset capabilities, this device is suitable for household appliances, incubators, greenhouses, reptile terrariums, and more. It operates on 100-250V, 50/60Hz, and supports a maximum load of 16A (3680W).

2. Информация по технике безопасности

• Убедитесь, что источник питания vol.tagсоответствует требованиям устройства (100-250 В).
• Do not exceed the maximum load capacity of 16A (3680W).
• Keep the device and sensor away from water or excessive moisture.
• Не разбирайте и не модифицируйте устройство. По всем вопросам обслуживания обращайтесь к квалифицированному персоналу.
• Хранить в недоступном для детей месте.
• Always unplug the device from the power outlet before cleaning or maintenance.

3. Продукт закончилсяview

The KETOTEK KT3100 features a clear LCD display and intuitive buttons for easy operation. The device integrates a power outlet and a temperature sensor for direct control of connected appliances.

Рисунок 3.1: Передний view of the KT3100 thermostat with labeled components. It shows the LCD display indicating measured temperature, start temperature (ON), and stop temperature (OFF). Buttons include MODE, SET, UP, and DOWN. Indicators for heating/cooling mode and output working are also visible.

Основные характеристики:

• Контроль температуры: Range from -40°C to 120°C.
• Функции синхронизации: F01 (Cycle Timer), F02 (Countdown ON), F03 (Countdown OFF), F04 (Countdown ON/OFF).
• Калибровка температуры: Adjust temperature readings from -9.9°C to 9.9°C.
• Функция памяти: Сохраняет настройки после отключения питания.
• Функция сброса: Восстановите заводские настройки по умолчанию.

Рисунок 3.2: Visual representation of the KT3100's main functions, including heating/cooling, timing, temperature calibration, memory, and reset.

4. Настройка

1. Распаковать: Carefully remove the thermostat and its sensor from the packaging.
2. Подключите датчик: Ensure the 3-meter temperature sensor is securely plugged into the designated port on the thermostat.
3. Размещение: Position the sensor in the area where you wish to measure and control the temperature.
4. Включение питания: Plug the KT3100 thermostat into a standard 230V power outlet. The LCD display will illuminate, showing the current measured temperature.
5. Подключить устройство: Plug your heating or cooling appliance (e.g., heater, fan, refrigerator) into the power outlet on the front of the KT3100 thermostat.

5. Инструкция по эксплуатации

5.1. Setting Temperature Control (Heating/Cooling Mode)

This mode allows you to set a desired temperature range for your appliance to maintain.

1. Нажмите РЕЖИМ button once. The 'Start Temperature (ON)' value will flash.
2. Используйте UP or ВНИЗ buttons to adjust the desired temperature at which your appliance should turn ON.
3. Нажмите РЕЖИМ button again. The 'Stop Temperature (OFF)' value will flash.
4. Используйте UP or ВНИЗ buttons to adjust the desired temperature at which your appliance should turn OFF.
5. Нажмите РЕЖИМ button a third time to save the settings and exit the programming mode.

The thermostat will automatically switch between heating and cooling modes based on your set start and stop temperatures. If the 'Start Temperature' is lower than the 'Stop Temperature', it operates in heating mode. If 'Start Temperature' is higher than 'Stop Temperature', it operates in cooling mode.

Рисунок 5.1: LCD display showing measured temperature, and configurable start and stop temperatures.

5.2. Timing Functions (F01-F04)

The KT3100 offers four timing modes for advanced control. To access timing modes, press and hold the РЕЖИМ button for 3 seconds until 'F01' appears.

1. F01: Режим циклического таймера
   Sets the ON and OFF duration for a repeating cycle. Press НАБОР to enter settings. Use ВВЕРХ/ВНИЗ to set ON hours/minutes, then НАБОР again to set OFF hours/minutes. Press РЕЖИМ для подтверждения.
2. F02: Режим обратного отсчета включен
   The appliance will turn ON after a set countdown period. Press НАБОР to enter settings. Use ВВЕРХ/ВНИЗ to set countdown hours/minutes. Press РЕЖИМ для подтверждения.
3. F03: Режим обратного отсчета выключен
   The appliance will turn OFF after a set countdown period. Press НАБОР to enter settings. Use ВВЕРХ/ВНИЗ to set countdown hours/minutes. Press РЕЖИМ для подтверждения.
4. F04: Countdown ON, Countdown OFF Mode
   The appliance will turn ON after a set countdown, then turn OFF after another set countdown. Press НАБОР to enter settings. Use ВВЕРХ/ВНИЗ to set ON countdown hours/minutes, then НАБОР again to set OFF countdown hours/minutes. Press РЕЖИМ для подтверждения.

The time range for all timing functions is 0 to 99 hours and 59 minutes.

Рисунок 5.2: Examples of LCD displays for different timing modes (F01-F04), showing settings for hours and minutes.

5.3. Калибровка температуры

If you notice a discrepancy between the thermostat's measured temperature and a known accurate thermometer, you can calibrate the sensor.

1. При включенном устройстве нажмите и удерживайте кнопку. НАБОР button for 3 seconds. The calibration value will flash.
2. Используйте UP or ВНИЗ buttons to adjust the calibration value from -9.9°C to 9.9°C.
3. Нажмите НАБОР button again to save the setting and exit.

5.4. Функция памяти

The KT3100 thermostat is equipped with a memory function that automatically saves your last settings. In case of a power outage, the device will resume operation with the previously configured settings once power is restored.

5.5. Функция сброса

To restore the thermostat to its factory default settings:

• Locate the small reset button (often a small hole) on the device.
• Use a thin, pointed object (like a paperclip) to press and hold the reset button for a few seconds until the display resets.

6. Техническое обслуживание

• Уборка: Протирайте устройство мягкой сухой тканью. Не используйте абразивные чистящие средства и не погружайте устройство в воду.
• Уход за датчиком: Handle the temperature sensor carefully. Avoid bending or damaging the cable.
• Хранилище: When not in use for extended periods, store the thermostat in a cool, dry place, away from direct sunlight and extreme temperatures.

7. Поиск Неисправностей

• Дисплей выключен: Проверьте, надежно ли термостат подключен к работающей розетке.
• Прибор не отвечает: Ensure the appliance is correctly plugged into the thermostat's outlet and that the appliance itself is powered on and functional. Verify temperature settings are within the desired range.
• Неточные показания температуры: Perform a temperature calibration as described in Section 5.3. Ensure the sensor is properly placed and not exposed to external heat sources or drafts that could affect its reading.
• Настройки не сохраняются: If settings are not retained after power cycling, try performing a reset (Section 5.5) and reconfigure. If the issue persists, contact customer support.

8. Технические характеристики

Рисунок 8.1: Dimensions of the KT3100 thermostat and its 290cm (approx. 3m) sensor cable.

9. Гарантия и поддержка

For warranty information or technical support, please refer to the product packaging or contact KETOTEK customer service directly. Keep your purchase receipt for warranty claims.