Philips HR1700

Philips HR1700 Blender Jug Replacement Part User Manual

1. Введение

This document provides essential instructions for the safe and effective use of your new Philips HR1700 compatible blender jug replacement part. This jug (model JC_PH_SM) is designed to function with Philips HR1700 series blenders. Please read this manual thoroughly before first use and retain it for future reference.

2 Важная информация по безопасности

Always observe basic safety precautions when using electrical appliances, including your blender. This replacement jug is intended for use with the Philips HR1700 blender only. Failure to follow these instructions may result in damage or injury.

  • Ensure the blender is отключенный from the power outlet before assembling, disassembling, or cleaning the jug.
  • Do not operate the blender with a damaged jug or lid.
  • Keep hands and utensils out of the jug while the blender is operating to prevent injury.
  • Do not fill the jug beyond the maximum fill line to avoid spillage.
  • This jug is not intended for use with hot liquids that may cause pressure buildup.
  • Always ensure the lid is securely in place before operating the blender.

3. Содержимое упаковки

При распаковке убедитесь в наличии всех компонентов:

  • 1 x Blender Jug (JC_PH_SM)
  • 1 x Jug Lid

4. Настройка и сборка

Follow these steps to properly set up your new blender jug:

  1. Распаковать: Carefully remove the blender jug and lid from its packaging.
  2. Начальная очистка: Before first use, wash the jug and lid with warm, soapy water. Rinse thoroughly and dry.
  3. Prepare Blender: Ensure your Philips HR1700 blender base is unplugged and placed on a stable, flat surface.
  4. Прикрепить кувшин: Align the base of the jug with the blender motor unit. Twist or push down firmly until it locks securely into place. Refer to your original Philips HR1700 blender manual for specific attachment instructions if needed.
  5. Безопасная крышка: Place the lid onto the jug and ensure it is properly seated and sealed.
Transparent blender jug with a black lid, placed on a blender base.
Image: The transparent blender jug with its lid, ready for attachment to the blender base. This image illustrates the general appearance of the replacement jug.

5. Инструкция по эксплуатации

This replacement jug functions identically to the original jug for your Philips HR1700 blender. Always refer to your main Philips HR1700 blender instruction manual for detailed operating procedures, speed settings, and blending tips.

  1. Добавьте ингредиенты: Place your desired ingredients into the jug. Do not exceed the maximum fill line indicated on the jug.
  2. Безопасная крышка: Firmly place the lid onto the jug. Ensure any pouring spout or filler cap is also closed.
  3. Место на базе: Ensure the jug is correctly seated and locked onto the blender motor unit.
  4. Подключить: Включите блендер в розетку.
  5. Operate Blender: Select the desired speed or program on your Philips HR1700 blender base.
  6. Налить: Once blending is complete, switch off and unplug the blender. Carefully remove the lid and pour out the contents.

6. Чистка и обслуживание

Regular cleaning ensures hygiene and prolongs the life of your blender jug.

  • Всегда отключайте блендер от сети. перед чисткой.
  • Разобрать: Remove the jug from the blender base and separate the lid.
  • Стирать: Wash the jug and lid immediately after use to prevent food residue from drying. Hand washing with warm, soapy water is recommended. Use a soft brush for hard-to-reach areas.
  • Смывать: Тщательно промойте все детали под проточной водой.
  • Сухой: Дайте всем деталям полностью высохнуть на воздухе перед сборкой или хранением.
  • Хранилище: Store the clean, dry jug and lid in a safe place.

7. Поиск Неисправностей

If you encounter issues with your replacement blender jug, consider the following:

  • Jug does not fit on blender base: Ensure you have the correct model (Philips HR1700). Check for any obstructions on the blender base or the jug's bottom.
  • Lid does not seal properly: Ensure the lid is correctly aligned and pressed down firmly. Check for any food particles or damage preventing a proper seal.
  • Leaks from the jug: If the jug itself is leaking (not from the lid), inspect for cracks or damage. If damaged, discontinue use and replace.

For issues related to the blender's motor or operation, refer to your original Philips HR1700 blender manual.

8. Технические характеристики

Номер детали производителяJC_PH_SM
СовместимостьPhilips HR1700 Blenders
МатериалHigh-quality materials (Transparent)
Вес товара500 грамм
ТипCountertop Blender Accessory

9. Гарантия и поддержка

This product is a non-original replacement part. For any questions regarding this specific replacement jug, including warranty information or support, please contact the seller directly through your purchase platform. Philips' official warranty may not cover the use of non-original parts.