Boston Tech BE108 Paraffin Wax Bath

Введение

The Boston Tech BE108 paraffin wax bath is a fast and safe heating device designed to soften skin and relieve joint pain. It is suitable for both cosmetic and therapeutic use, offering benefits for muscle pain, arthritis, and general skin revitalization. This manual provides essential instructions for the safe and effective use of your paraffin wax bath.

Важные инструкции по технике безопасности

• Перед использованием прибора прочтите все инструкции.
• Не погружайте прибор в воду или другие жидкости.
• Всегда отключайте прибор от розетки сразу после использования и перед чисткой.
• Не используйте прибор с поврежденным шнуром или вилкой, а также если он неисправен или каким-либо образом поврежден.
• Держите шнур вдали от нагретых поверхностей.
• Не использовать на открытом воздухе.
• Всегда устанавливайте прибор на устойчивую, термостойкую поверхность.
• This appliance includes an overheat protection system and an insulating grid for safe operation.
• Do not touch the hot wax directly. Always check the temperature before use.
• Хранить в недоступном для детей месте.

Содержимое упаковки

Your Boston Tech BE108 Paraffin Wax Bath package includes the following items:

• 1 x Boston Tech BE108 Paraffin Wax Bath Unit
• 2 x Paraffin Wax Blocks (450g each)
• 1 x Insulating Grid
• 2 x Thermal Gloves
• 100 x Plastic Gloves
• 1 x Brush
• 1 х Руководство пользователя

Продукт болееview

The Boston Tech BE108 features a robust design with high-quality ABS and heat-resistant aluminum. It has a compact and elegant form factor, making it easy to clean and suitable for various environments.

Панель управления

The control panel allows for precise temperature regulation and mode selection.

• Temperature Regulation Buttons: Use these to adjust the desired wax temperature between 30°C and 85°C.
• Кнопка включения/выключения: Включает и выключает устройство.
• Переключатель режимов: Selects different operating modes (if applicable).
• ЖК-экран: Отображает текущую температуру.

Настраивать

1. Размещение: Place the paraffin wax bath on a flat, stable, and heat-resistant surface. Ensure there is adequate ventilation around the unit.
2. Вставить сетку: Place the insulating grid at the bottom of the wax bath. This prevents direct contact between the heating element and the user's skin.
3. Добавить воск: Open the paraffin wax blocks and place them into the bath. The unit has a 5-liter capacity. Ensure the wax level is between the minimum and maximum fill lines.
4. Включение питания: Plug the power cord into a suitable electrical outlet. Press the On/Off button to turn on the unit.
5. Установить температуру: Use the temperature regulation buttons to set the desired melting temperature. For initial melting, a higher temperature (e.g., 70-80°C) can be used to speed up the process.
6. Расплавленный воск: Allow approximately 40 minutes for the wax to fully melt. The LCD screen will display the current temperature. Once melted, adjust the temperature to a comfortable and safe level for skin application (typically between 45-55°C).

Инструкция по эксплуатации

Paraffin Treatment for Hands, Feet, or Elbows

1. Подготовка: Убедитесь, что обрабатываемая область (руки, ступни или локти) чистая и сухая. Снимите все украшения.
2. Проверка температуры: Before dipping, test a small amount of wax on your wrist to ensure the temperature is comfortable and not too hot. The recommended temperature for application is typically between 45-55°C.
3. Первое погружение: Slowly dip your hand, foot, or elbow into the melted paraffin wax. Immediately remove it, allowing the wax to solidify slightly (a few seconds).
4. Repeat Dips: Repeat the dipping process 3-5 times, or until a thick, even layer of wax has formed.
5. Покрытие: Immediately after the final dip, cover the treated area with a plastic glove, followed by a thermal glove. This helps retain heat and maximize the therapeutic effect.
6. Расслабление: Keep the wax on for 10-15 minutes. During this time, the heat will penetrate, providing relief and hydrating the skin.
7. Удаление: Gently peel off the solidified wax. The wax should come off easily, taking dead skin cells with it. Discard the used wax.

Техническое обслуживание и очистка

1. Остывать: After each use, turn off the unit and unplug it from the power outlet. Allow the wax to cool and solidify completely.
2. Удалите воск: Once the wax has solidified, it can often be removed as a single block. If necessary, gently scrape the sides with a non-abrasive tool to loosen it.
3. Чистый салон: Используйте мягкий, damp cloth to wipe the interior of the bath. Do not use abrasive cleaners or solvents, as these can damage the surface.
4. Чистый экстерьер: Протрите внешнюю поверхность устройства мягкой сухой тканью.
5. Хранилище: Когда прибор не используется, храните его в сухом прохладном месте.

Поиск неисправностей

• Wax not melting: Ensure the unit is properly plugged in and turned on. Check that the temperature setting is high enough for melting (e.g., 70-85°C). Allow sufficient time for the wax to melt (approx. 40 minutes).
• Wax too hot/cold: Adjust the temperature using the control panel buttons. Allow a few minutes for the wax to reach the new temperature. Always test the wax temperature before application.
• Раздражение кожи: If you experience any skin irritation, redness, or discomfort, discontinue use immediately. Consult a healthcare professional if symptoms persist.
• Устройство не включается: Check the power connection and ensure the outlet is functional. If the issue persists, contact customer support.

Технические характеристики

Гарантия и поддержка

The Boston Tech BE108 Paraffin Wax Bath comes with a Гарантия 3 год. For any technical assistance, product inquiries, or warranty claims, please contact Boston Tech official technical service in your region. Refer to the contact information provided on the product packaging or the official Boston Tech webсайт.