1. Введение
The SENSTREE Digital Temperature Controller is designed for precise temperature management in various environments. It features a large LCD screen, dual relay output for simultaneous heating and cooling control, and a high-accuracy silicone temperature sensor. This device is suitable for applications such as home wine/beer brewing, aquariums, greenhouses, seedling heat mats, and controlling temperatures in refrigerators or freezers.
2. Информация по технике безопасности
- Do not expose the thermostat or probe to water.
- Ensure the device is plugged into a standard U.S. 110V outlet.
- Max output load: 1100W@110V, max current: 10A. Do not overload.
- If the thermostat delivers power to a heating/cooling device for more than 5 consecutive hours without reaching the desired temperature, it indicates a potential issue with the device or environment.
3. Продукт закончилсяview
The SENSTREE Digital Temperature Controller (Model ZJ-DTC102-1) consists of a main control unit with a digital display, a temperature sensing probe, and a power outlet strip with clearly labeled heating and cooling receptacles.
Image: The main components of the SENSTREE Digital Temperature Controller, including the display unit, temperature probe, and dual power outlet.
4. Технические характеристики
| Особенность | Деталь |
|---|---|
| Бренд | SENSTREE |
| Модель | ZJ-DTC102-1 |
| Размеры продукта | 1.1"Д x 2.56"Ш x 2.56"В |
| Тип контроллера | Кнопка нажатия |
| Специальная характеристика | Temperature Display, Lightweight Design |
| Цвет | Черный |
| Конкретные области применения продукта | Boiler, Homebrew, Aquarium, Greenhouse, Fermenter, Refrigerator, Freezer |
| Тип контроля температуры | Термостатический |
| Включенные компоненты | DTC-102 Temperature Controller, NTC sensor, Manual |
| Источник питания | Проводной электрический |
| Томtage | 110 Вольт, 220 Вольт |
| Материал | АБС, Силикон |
| Диапазон регулирования температуры | -40°C до 120°C (-40°F до 248°F) |
| Температурное разрешение | 0.1°С, 0.1°F |
| Точность температуры | ±1°C, 1°F |
| Длина датчика | Approx 2m (6 ft) |
| Длина входного силового кабеля | 150 см (5 футов) |
| Длина выходного силового кабеля | 18 см (7 дюймов) |
| Максимальная выходная нагрузка | 1100 Вт при 110 В, 2200 Вт при 220 В |
| Максимальный ток | 10А |
5. Настройка
5.1 Первоначальное включение
Plug the controller into a standard 110V AC power outlet. The display will illuminate.
Video: A hand plugging the controller into a wall outlet, demonstrating the initial power-up.
5.2 Переключение между градусами Фаренгейта и Цельсия
The thermostat defaults to Fahrenheit (°F). An indicator light on the display will show the active unit (°F or °C).
- To switch to Celsius (°C): Press and hold the ВНИЗ кнопку в течение 3 секунд.
- To switch back to Fahrenheit (°F): Press and hold the UP кнопку в течение 3 секунд.
Video: Demonstrates how to switch between Fahrenheit and Celsius by pressing and holding the UP or DOWN buttons.
5.3 Placing the Temperature Probe
The temperature probe is made of silicone and is waterproof. Place the probe in the environment where temperature monitoring is required. It comes with a suction cup for easy placement.
Image: A close-up of the temperature probe with a suction cup for attachment.
6. Инструкция по эксплуатации
6.1 Programming Desired Temperature
Чтобы установить желаемую температуру:
- Нажмите и удерживайте НАБОР button until the display starts blinking.
- Используйте UP и ВНИЗ buttons to adjust the desired temperature value. The control range is -40°C to 120°C (-40°F to 248°F).
- Нажмите НАБОР Нажмите кнопку еще раз, чтобы подтвердить и сохранить настройку.
Video: Shows the process of programming the desired temperature on the controller.
6.2 Connecting Heating and Cooling Devices
The controller features two outlets: one for heating and one for cooling. Plug your heating device (e.g., space heater, heat mat) into the ОБОГРЕВ outlet and your cooling device (e.g., fan, refrigerator) into the ОХЛАЖДЕНИЕ выход.
Image: A close-up of the dual power outlet strip, labeled "COOLING" and "HEATING".
Video: Illustrates plugging a cooling device into the controller's cooling outlet.
6.3 Viewing Current and Set Temperatures
The main display shows the current temperature measured by the probe. Briefly press the НАБОР кнопка для view the programmed desired temperature.
Video: Demonstrates how to view the current and desired set temperatures on the display.
6.4 Understanding the 3-Degree Buffer Zone
The thermostat is designed with a 3-degree buffer zone. This means that if the set temperature is 60°F, the heating/cooling device will activate when the temperature deviates by 3 degrees from the set point, preventing frequent on/off cycling and extending device lifespan.
Video: Explains the 3-degree buffer zone feature of the thermostat, which prevents rapid cycling of connected devices.
7. Техническое обслуживание
Keep the device clean and free from dust. Regularly inspect the temperature probe and cables for any signs of damage. Ensure the probe is securely connected to the main unit. Do not attempt to open or repair the device yourself; contact customer support for assistance.
8. Поиск Неисправностей
8.1 Коды ошибок
- E1: Temperature below 32°F (0°C).
- E2: Temperature above 108°F (42°C).
- E3: Temperature sensor not working.
If the screen displays E1, E2, or E3, check the temperature probe connection and the ambient temperature. Ensure the probe is fully plugged in and positioned correctly.
Video: Explains the meaning of error codes E1, E2, and E3 displayed on the thermostat.
8.2 Device Not Reaching Desired Temperature
If the thermostat delivers power to a heating/cooling device for more than 5 consecutive hours without reaching the desired temperature, it indicates that the desired temperature is not being reached. Check the connected device for proper function and ensure it is adequately sized for the environment.
9. Гарантия и поддержка
The product comes with a 12-month warranty. For further information, safety warnings, and detailed troubleshooting tips, please refer to the included guide or contact SENSTREE customer support.
Для получения дополнительной поддержки посетите SENSTREE Store on Amazon.