Como Audio Analog Turntable (Model CATA) Instruction Manual

Введение

This instruction manual provides essential information for the proper setup, operation, and maintenance of your Como Audio Analog Turntable, Model CATA. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

Image: The Como Audio Analog Turntable, featuring a walnut wood plinth, black platter, and tonearm.

Изображение: Подробный view of the rich walnut finish on the turntable's plinth, showcasing the wood grain.

Содержимое упаковки

Before proceeding with setup, ensure all components are present and undamaged:

• Como Audio Analog Turntable unit
• Pre-mounted Ortofon cartridge/stylus
• блюдо
• Приводной ремень
• Removable clear dust cover
• Войлочный коврик
• Аудиокабель
• Power supply (15V/0.8A, universal 110V-240V, 50-60Hz)
• Руководство по эксплуатации (данный документ)

Инструкции по установке

1. Распаковка и размещение

• Аккуратно извлеките все компоненты из упаковки.
• Установите проигрыватель на устойчивую ровную поверхность вдали от прямых солнечных лучей, источников тепла и чрезмерной вибрации.

2. Установка диска и приводного ремня

• Place the platter onto the spindle located on the turntable plinth.
• Locate the drive belt. Gently stretch the belt around the motor pulley (small metal cylinder) and the inner rim of the platter. Ensure the belt is not twisted.

3. Cartridge and Stylus

The Como Audio Analog Turntable comes with a premium Ortofon cartridge and stylus pre-mounted. No adjustment of counterweight or anti-skating is required for initial setup.

4. Установка пылезащитного чехла

Image: Detail of the removable clear dust cover, designed to protect the turntable from dust.

• Carefully align the hinges of the clear dust cover with the corresponding slots on the rear of the turntable plinth.
• Gently push down until the dust cover is securely in place. The dust cover is removable for cleaning or when not in use.

5. Аудиоподключение

The turntable offers selectable Line output or Phono output. Choose the appropriate connection for your audio system:

• Line Output (Integrated Phono Pre-Amp): Use this option if your amplifier or music system (e.g., Como Audio music system) has an Auxiliary (AUX) input and does not have a dedicated Phono input. Connect the included audio cable from the turntable's Line Out to your system's AUX input.
• Фоно выход: Use this option if your amplifier or music system has a dedicated Moving Magnet (MM) Phono input. Connect the included audio cable from the turntable's Phono Out to your system's Phono input. Ensure your amplifier's Phono input is selected.

Примечание: If experiencing a humming noise, ensure proper grounding. Some audio systems may require a separate ground wire connection if available on your ampпожизненнее.

6. Подключение питания

• Connect the power supply cable to the DC input jack on the rear of the turntable.
• Подключите адаптер питания к подходящей розетке.

Инструкция по эксплуатации

1. Powering On and Speed Selection

• Locate the integrated power and speed control switch, typically on the bottom left side of the turntable plinth.
• Turn the switch to select either 33 1/3 об/мин for LPs or 45 об/мин for singles. The platter will begin to spin.

2. Воспроизведение записи

Image: The turntable with a record spinning on the platter, and the tonearm positioned over the record.

• Положите войлочный коврик на блюдо.
• Carefully place a vinyl record onto the felt mat.
• Аккуратно поднимите тонарм с помощью рычага подъема тонарма.
• Position the stylus over the desired starting groove of the record.
• Медленно опустите рычаг позиционирования, чтобы игла опустилась на пластинку.
• Отрегулируйте громкость на подключенной аудиосистеме.

3. Остановка воспроизведения

• At the end of a record, or when you wish to stop playback, gently lift the tonearm using the cueing lever.
• Return the tonearm to its rest position and secure it with the tonearm clip.
• Turn the power/speed switch to the "Off" position to stop the platter from spinning.
• Примечание: This turntable does not feature an automatic shut-off function. The platter will continue to spin until manually turned off.

Обслуживание

1. Очистка проигрывателя

• Always power off and unplug the turntable before cleaning.
• Use a soft, dry, lint-free cloth to wipe the plinth and platter. Avoid abrasive cleaners or solvents.
• Для очистки пылезащитного чехла используйте мягкую ткань и, при необходимости, мягкое неабразивное чистящее средство.

2. Уход за стилусом

• Regularly clean the stylus using a dedicated stylus brush, brushing gently from back to front.
• Не прикасайтесь к стилусу пальцами.
• A worn or damaged stylus can harm your records and degrade sound quality. Replace the stylus when necessary (typically after 500-1000 hours of playback, depending on usage and record condition).

3. Приводной ремень

The drive belt is a wear item. If you notice inconsistent speed or the platter not spinning, the belt may need to be inspected or replaced. Contact Como Audio support for replacement parts.

Поиск неисправностей

Технические характеристики

Гарантия и поддержка

For warranty information, technical support, or replacement parts, please contact Como Audio directly through their official webСайт или каналы обслуживания клиентов. Сохраните чек в качестве подтверждения покупки.

Official Como Audio Webсайт: www.comoaudio.com