BTF-LIGHTING RT9 & VP LED Strip Controller Kit User Manual

1. Введение

This manual provides detailed instructions for the installation, operation, and maintenance of your BTF-LIGHTING RT9 & VP LED Strip Controller Kit. This kit is designed to provide versatile control over RGB and RGBW LED strips, offering features such as multi-zone control, color adjustment, and brightness dimming via a 2.4GHz RF wireless remote.

2. Информация по технике безопасности

Обеспечьте входной объемtage (12V/24V DC) matches the requirements of both the controller and the LED strips. Incorrect voltagможет причинить вред.
Do not exceed the maximum output current or power ratings of the controller. Overloading can lead to overheating and failure.
Always disconnect power before making any wiring connections to prevent electrical shock.
Install the controller in a dry, well-ventilated area. Avoid exposure to moisture, high temperatures, or corrosive environments.
Данный продукт предназначен только для использования внутри помещений.
Хранить в недоступном для детей месте.

3. Содержимое упаковки

Убедитесь, что все перечисленные ниже предметы включены в ваш пакет:

Image showing the BTF-LIGHTING RT9 remote, VP controller, user manual, battery, and wall mount bracket.

This image displays the complete contents of the BTF-LIGHTING RT9 & VP LED Strip Controller Kit, including the remote control, VP receiver, instruction manual, two AAA batteries, and a wall-mounted remote holder.

1 x RT9 RF 2.4GHz Wireless Remote Control
1 x VP 4-Channel LED Controller (Receiver)
1 x Remote Wall Mount Bracket
2 батарейки типа ААА (для пульта ДУ)
1 x Руководство пользователя (этот документ)

4. Технические характеристики

Особенность	Спецификация
Номер модели	JQGD RT9+VP
Vol входtage	12/24 В постоянного тока
Входной ток (макс.)	15.5А
Выход Voltage	4 x (12/24)V DC
Выходной ток	4 channels, 4A/channel, Max 6A total
Выходная мощность (макс.)	4 x (48/96)W
Тип вывода	Постоянный объемtage
Входной сигнал	РЧ 2.4 ГГц
Дистанция управления	30 м (безбарьерное пространство)
Затемнение, шкала серого	4096 (2 ^ 12) уровней
Диммирование	0-100%
Частота ШИМ	750 Гц (по умолчанию)
Рабочая температура	-30°С ~ +55°С
Рейтинг IP	IP20
Температура корпуса (макс.)	Tc: + 85 ° C
Использование внутри и снаружи помещений	В помещении

5. Настройка

5.1. Схема подключения

Follow the diagram below for correct electrical connections. Ensure all connections are secure before applying power.

Detailed wiring diagram for the BTF-LIGHTING LED controller, showing connections from power adapter to controller and then to RGB/RGBW LED strips.

This diagram illustrates the correct wiring connections for the VP 4CH LED Controller. It shows the AC 100-240V power adapter connecting to the controller's input, and the controller's output connecting to the RGB/RGBW LED strip lights. The remote controller is also shown for reference.

Connect your 12V or 24V DC power adapter to the input terminals of the VP controller. Ensure the positive (+) and negative (-) terminals are correctly matched.
Connect the LED strip to the output terminals of the VP controller. For RGBW strips, connect the Red (R), Green (G), Blue (B), and White (W) wires to their respective terminals, and the common positive (+) wire to the V+ terminal. For RGB strips, connect R, G, B, and V+.
Убедитесь, что все соединения надежно затянуты и изолированы, чтобы предотвратить короткое замыкание.

5.2. Контроллер сверхуview

Familiarize yourself with the controller's ports and indicators.

Крупный план view of the BTF-LIGHTING VP LED controller, highlighting input/output terminals and the match key.

Подробный view of the VP LED Controller, indicating the power input terminals (12-24VDC), DC socket input, match key, LED indicator, and the output terminals for Red, Green, Blue, and White LED channels, along with the common positive (+) output.

Потребляемая мощность: Terminals for 12-24V DC power supply.
DC Socket Input: Alternative power input via a DC barrel jack.
Ключ соответствия: Используется для сопряжения пульта дистанционного управления.
Светодиодный индикатор: Shows the status of the controller (e.g., pairing mode, signal reception).
Выходные клеммы: Labeled V+, R, G, B, W for connecting LED strips.

5.3. Удаленное сопряжение

To pair the RT9 remote control with the VP controller:

Ensure the VP controller is powered on and connected to the LED strip.
Within 3 seconds of powering on the controller, press the 'Match' key on the VP controller once. The LED indicator on the controller will flash.
Immediately press any button on the RT9 remote control.
If pairing is successful, the LED strip will flash a few times, indicating a successful connection.
If pairing fails, repeat the steps. Ensure the remote is within range and its batteries are functional.

6. Инструкция по эксплуатации

6.1. Basic Remote Functions

The RT9 remote control allows for comprehensive management of your LED lighting. Insert the two AAA batteries into the remote before use.

Illustration of a user controlling multiple lighting zones in a house using the BTF-LIGHTING RF 2.4GHz wireless remote.

This image demonstrates the wireless transmission capability of the RT9 remote, allowing control of individual lighting zones (Zone 1 to Zone 4 and more) within a 30-meter distance in a barrier-free space. The remote can control multiple LED bulbs or strips in different areas of a home.

Кнопка питания: Turns the connected LED strips on or off.
Цветовой круг: Touch the color wheel to select any desired color.
Регулировка яркости: Для регулировки интенсивности света используйте кнопки увеличения/уменьшения яркости.
Mode Buttons (S1, S2): Cycle through pre-programmed dynamic lighting modes.
Выбор зоны (1, 2, 3, 4): Select individual zones to control them independently. Press and hold a zone button to link/unlink a controller to that zone.
RGB/W Buttons: Directly select Red, Green, Blue, or White colors.

6.2. Зонное управление

The RT9 remote supports up to 4 independent zones, allowing you to control different sets of LED strips separately or together.

Diagram showing multiple BTF-LIGHTING VP controllers linked wirelessly, extending the control range up to 30 meters between each unit.

This diagram illustrates how multiple VP controllers can be linked together to extend the wireless control range. Each controller can communicate with others within a 30-meter radius, allowing for a larger network of controlled LED strips.

To assign a controller to a zone: Power on the controller, then within 3 seconds, press the 'Match' key on the controller. Immediately press the desired zone number (1-4) on the remote. The LED strip will flash to confirm assignment.
To control a specific zone, press its corresponding number button on the remote.
To control all zones simultaneously, press the 'All' button (if available on your remote model, or cycle through zones).

6.3. Product Feature Videos

This video demonstrates the color-changing capabilities and brightness adjustment of the RGBW 5050SMD LED strip light when controlled by the BTF-LIGHTING system. It showcases the range from 1% to 100% brightness and millions of available colors.

This video provides a visual guide on how to use the RT9 remote control with the VP LED strip controller. It shows the remote's functions for changing colors (RGB and white), adjusting brightness, and selecting different lighting modes for 4-pin and 5-pin LED strips.

7. Техническое обслуживание

Уборка: Gently wipe the controller and remote with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
Замена батареи: Replace the remote control batteries (2x AAA) when the control range decreases or the remote becomes unresponsive.
Хранилище: If storing the kit for an extended period, remove batteries from the remote and store in a cool, dry place.

8. Поиск Неисправностей

Проблема	Возможная причина/решение
Светодиодная лента не горит.	Check power supply connection to the controller. Ensure the power supply provides the correct voltage (12V/24V) and sufficient amperage for your LED strip length. Verify LED strip is correctly wired to the controller outputs (V+, R, G, B, W). Проверьте наличие ослабленных соединений или поврежденных проводов.
Remote does not control the LED strip.	Ensure the remote is paired with the controller. Refer to the "Remote Pairing" section (5.3). Check the remote's battery level and replace if necessary. Ensure there are no significant obstructions between the remote and the controller. Confirm the remote is within the 30m control range.
Неправильные цвета или мерцание.	Verify wiring connections for RGB/RGBW channels are correct and secure. Ensure the LED strip type (RGB or RGBW) matches the controller's configuration. Check for a stable power supply; voltagКолебания напряжения могут вызывать мерцание.
Ограниченный диапазон управления.	Ensure the controller is not obstructed by large metal objects or other sources of RF interference. The maximum control distance is 30m in barrier-free space. Walls and other obstacles will reduce this range. Consider adding more controllers to extend the network range if needed.

9. Гарантия и поддержка

BTF-LIGHTING products are manufactured to high standards and undergo rigorous testing. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty details, please refer to the product packaging or contact your retailer.

If you encounter any issues or require technical assistance, please contact BTF-LIGHTING customer support through the retailer's platform or the official BTF-LIGHTING website. Please have your product model number (JQGD RT9+VP) and purchase information ready when contacting support.

BTF-LIGHTING JQGD RT9+VP