DOVEET DR-41 Atomic Digital Wall Clock Instruction Manual

Введение

The DOVEET DR-41 Atomic Digital Wall Clock is designed to provide accurate time, date, and environmental information with ease. Featuring a large, easy-to-read LCD display, it automatically synchronizes with the WWVB atomic clock signal for precise timekeeping. This manual will guide you through the setup, operation, and maintenance of your new atomic clock and its wireless outdoor sensor.

Figure 1: The DOVEET DR-41 Atomic Digital Wall Clock with its accompanying wireless outdoor sensor.

Основные характеристики

• Атомная точность: Built-in receiver for WWVB broadcast signal from NIST, Fort Collins, Colorado, USA, ensuring precise time synchronization daily.
• Jumbo 4.5" Tall LCD Time Display: Large, easy-to-read display showing time (hours, minutes, seconds), indoor and outdoor temperature, calendar, and day of week. Ideal for visibility from a distance.
• Беспроводной наружный датчик: Measures accurate indoor/outdoor temperature and humidity in °F or °C. Wireless range up to 328ft (100M) in open areas.
• Питание от батареи: Main unit powered by 4 AA batteries, outdoor sensor by 2 AAA batteries (not included). Extended battery life up to 18 months due to efficient chip design.
• Универсальное размещение: Can be hung on a wall or placed on a table using the integrated kickstand.

Визуальные особенности

Figure 2: The clock features a significantly larger display compared to standard clocks, enhancing readability.

Figure 3: The wireless outdoor sensor offers a transmission range of up to 328 feet in open environments.

Рисунок 4: Болееview of the clock's display elements and rear control buttons for various functions.

Figure 5: The clock and sensor are battery-powered, offering long operational life.

Руководство по настройке

1. Установите батареи:
   • Open the battery compartment on the back of the main clock unit. Insert 4 new AA batteries, observing polarity (+/-).
   • Open the battery compartment on the wireless outdoor sensor. Insert 2 new AAA batteries, observing polarity (+/-).
   • Ensure both units are powered on within 3 minutes of each other for successful pairing.
2. Сопряжение датчиков: The outdoor sensor will automatically attempt to pair with the main unit. A signal strength indicator will appear on the clock's display once connected. If pairing fails, press the "CHANNEL" button on the main unit to re-register the channel, or re-insert batteries in both units.
3. Atomic Time Synchronization (WWVB):

   The clock will automatically attempt to receive the WWVB atomic signal from Fort Collins, Colorado. This usually occurs overnight. Place the clock in an area with good reception, away from large metal objects or electronic interference. A tower icon will appear on the display when the signal is successfully received.

   To manually initiate atomic signal reception, press and hold the "DOWN/RCC" button for 3 seconds. The clock will begin searching for the signal.

4. Установить часовой пояс: Press the "UP/ZONE" button repeatedly to cycle through the available time zones (EST, CST, MST, PST, AKST, HST) until your desired time zone is displayed.
5. Выбор единицы измерения температуры: Press the "DOWN/RCC" button briefly to switch between Fahrenheit (°F) and Celsius (°C) for temperature display.

Видеоруководство по установке

Инструкция по эксплуатации

Отображение информации:

• Время: Large digits display hours, minutes, and seconds. AM/PM indicator is present for 12-hour format.
• Дата и день недели: Displays month, day, and the full day of the week.
• Температура и влажность в помещении: Shown on the left side of the lower display.
• Температура и влажность наружного воздуха: Shown on the right side of the lower display, received from the wireless sensor.
• Атомный сигнальный индикатор: A tower icon indicates successful reception of the WWVB signal.
• Индикатор летнего времени: Displays when Daylight Saving Time is active.
• Индикатор низкого заряда батареи: An icon will appear in the upper right of the screen when batteries are low.

Button Functions (Rear of Unit):

Note: The clock can display readings from up to 3 outdoor sensors. Use the CHANNEL button to switch between them or enable auto-cycling.

Обслуживание

• Замена батареи: When the low battery indicator appears, replace all batteries in both the main unit and the outdoor sensor. It is recommended to use high-quality, non-leaking batteries (e.g., Lithium batteries) to prevent damage to the device, especially for long-term use.
• Уборка: Wipe the clock and sensor with a soft, dry cloth. Do not use abrasive cleaners or chemicals, as they may damage the display or casing.
• Размещение датчика: For optimal performance and longevity, place the outdoor sensor in a shaded area that is protected from direct sunlight and heavy rain. While the sensor is splash-proof, prolonged exposure to harsh weather conditions can affect its accuracy and lifespan.

Поиск неисправностей

Нет изображения или изображение нечеткое:

Check battery polarity and ensure batteries are fresh. Replace all batteries if necessary.

Outdoor Temperature/Humidity Not Displaying or Inaccurate:

• Ensure batteries in the outdoor sensor are fresh and correctly installed.
• Press the "CHANNEL" button on the main unit to re-establish connection or cycle through channels.
• Move the outdoor sensor closer to the main unit to improve signal strength. Avoid large metal objects or thick walls between the units.
• Ensure the sensor is not in direct sunlight, which can cause artificially high temperature readings.

Atomic Time (WWVB) Signal Not Received:

• Place the clock near a window or in an open area, away from electronic devices that may cause interference.
• Manually initiate signal reception by holding the "DOWN/RCC" button for 3 seconds.
• Note that signal reception can be affected by atmospheric conditions, geographical location, and time of day (best reception is often overnight).

Incorrect Date/Day of Week:

Ensure the correct year is set if manually setting the time, as this can affect the calendar function. The atomic signal should correct this automatically once received.

Технические характеристики

Гарантия и поддержка

For warranty information or technical support regarding your DOVEET DR-41 Atomic Digital Wall Clock, please refer to the contact information provided on the product packaging or visit the official DOVEET webСохраните чек о покупке для предъявления претензий по гарантии.