1. Введение
Thank you for choosing the LEPOTEC 30-LED Motion Sensor Cabinet Light. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new lighting product. Please read this manual thoroughly before use and retain it for future reference.
Содержимое упаковки:
- LEPOTEC 30-LED Motion Sensor Cabinet Light (2 units)
- USB-кабель для зарядки
- Adhesive Magnetic Strips
- Руководство пользователя
2. Особенности продукта
- Передовая светодиодная технология: Features 30 side-emitting LED lamp beads for bright (up to 200 lumens) yet soft, non-glare illumination. Constructed from durable aluminum alloy.
- Простая установка: Built-in magnet allows direct attachment to iron surfaces. For non-iron surfaces, use the included adhesive tape and metal sheet for secure mounting. Lights can be easily removed for charging or relocation.
- Три режима работы: Equipped with a 3-mode switch (ON-OFF-G) for continuous illumination, off, or motion sensor mode.
- Зарядка через USB: Integrated 1000mAh high-capacity rechargeable battery, easily charged via the included USB cable. Offers approximately 3 hours of continuous light or 2-4 weeks in motion sensor mode (based on 10 activations per day) on a full charge.
- Широкое применение: Suitable for various indoor locations such as closets, cabinets, corridors, workshops, basements, garages, and stairwells.
Image: Two LEPOTEC 30-LED Motion Sensor Cabinet Lights, illustrating the product design.
3. Настройка и установка
The LEPOTEC cabinet light offers flexible installation options due to its magnetic design.
Этапы установки:
- Прямое магнитное крепление: If installing on an iron surface (e.g., refrigerator, metal cabinet), simply place the light directly onto the surface. The built-in magnet will secure it.
- Adhesive Magnetic Strip Installation (for non-iron surfaces):
- Clean the desired installation surface to ensure it is dry and free of dust or grease.
- Peel off the protective film from one side of the adhesive tape and attach it to the metal plate.
- Peel off the protective film from the other side of the adhesive tape and firmly press the metal plate onto the cleaned surface.
- Attach the LEPOTEC cabinet light to the metal plate. The light will magnetically adhere to the plate.
Image: Illustration of the built-in magnet for direct attachment and the adhesive magnetic strip method for non-metal surfaces.
4. Инструкция по эксплуатации
The LEPOTEC cabinet light features a versatile 3-mode switch and motion sensing capabilities.
Выбор режима:
Locate the switch on the side of the light bar. Slide the switch to select one of the following modes:
- НА: Свет будет гореть постоянно.
- OFF: Свет будет выключен.
- G (Motion Sensor Mode): In a dark environment, the light will automatically detect human motion within a 10ft/120° range. It will turn on when motion is detected and automatically turn off after 20 seconds of no movement. The motion sensor is designed to activate only in low-light conditions to conserve battery life.
Изображение: подробное view of the 3-mode switch (G, OFF, ON) and the Type-C charging port.
Image: Explanation of the auto-induction condition, showing the motion sensor activates only in low light (night) and not in bright light (daytime).
5. Техническое обслуживание
Зарядка аккумулятора:
The light is equipped with a built-in rechargeable battery. When the battery is low, the light output may diminish. To charge:
- Connect the included USB charging cable to the Type-C charging port on the light bar.
- Другой конец USB-кабеля подключите к стандартному USB-адаптеру питания (не входит в комплект) или к USB-порту компьютера.
- Во время зарядки индикатор зарядки будет гореть красным цветом.
- После полной зарядки (примерно через 3 часа) индикатор загорится зеленым цветом.
- Отсоедините зарядный кабель.
Image: Visual representation of the 1000mAh battery, quick charge capability, and charging status indicators (red for charging, green for fully charged).
Уборка:
Для очистки светильника аккуратно протрите поверхность мягкой сухой тканью. Не используйте абразивные чистящие средства или растворители, так как они могут повредить покрытие или электронные компоненты.
6. Поиск Неисправностей
If you encounter issues with your LEPOTEC cabinet light, please refer to the following common problems and solutions:
| Проблема | Возможная причина | Решение |
|---|---|---|
| Light does not turn on in 'G' (Motion Sensor) mode. | Insufficient darkness; battery low; sensor obstructed. | Ensure the environment is dark enough for the sensor to activate. Charge the battery. Check if the sensor is clean and unobstructed. |
| Light stays on continuously in 'G' mode or flickers. | Constant motion detected; sensor malfunction; switch issue. | Ensure no continuous motion is within the sensor's range. Try switching to 'OFF' and then back to 'G' mode. If the issue persists, contact customer support. |
| Свет не заряжается. | Faulty cable; power source issue; charging port damage. | Попробуйте другой USB-кабель и адаптер питания. Убедитесь, что зарядный порт чистый и не поврежден. |
| Срок службы батареи меньше ожидаемого. | Frequent activation; continuous 'ON' mode usage. | Battery life varies with usage frequency. Reduce activations in 'G' mode or use 'OFF' mode when not needed. Ensure the light is fully charged. |
7. Технические характеристики
| Особенность | Деталь |
|---|---|
| Бренд | ЛЕПОТЕК |
| Номер модели | ТЛ030-2 |
| Источник света | 30 светодиодных лампочек |
| Светлый цвет | Белый Свет |
| Яркость | 200 люмен |
| Ватtage | 2 Вт |
| Томtage | 3.7 Вольт |
| Емкость аккумулятора | Литий-полимерный емкостью 1000 мАч |
| Время зарядки | Приблизительно 3 часов |
| Диапазон датчика движения | 10 футов / 120° |
| Время автоматического выключения | 20 seconds (after no motion in 'G' mode) |
| Материал | Алюминий, Железо |
| Размеры продукта | 8.2"L x 3.5"W x 0.6"H (7.8 inch length for the light bar itself) |
| Вес товара | 9.12 унции |
| Тип установки | Magnetic, Adhesive Mount |
| Использование внутри и снаружи помещений | В помещении |
8. Гарантия и поддержка
LEPOTEC is committed to providing high-quality products. For any questions, concerns, or technical support regarding your LEPOTEC 30-LED Motion Sensor Cabinet Light, please contact our customer service team.
Пожалуйста, ознакомьтесь с документами о покупке или информацией у продавца. webсайт для получения подробной информации о гарантии и контактной информации.