Введение
This manual provides essential information for the safe and effective assembly, operation, and maintenance of your Global Industrial Adjustable Height Workbench. Please read this manual thoroughly before beginning assembly or use, and retain it for future reference.
The Global Industrial Adjustable Height Workbench features a durable tempered hardboard top bonded to a particleboard core, designed for rugged use. Its smooth hardwood edges resist moisture and prevent warping or splintering. The adjustable height C-channel legs are made of steel, undercoated for rust resistance, and finished with a black powder coat for durability. The legs include removable duplex knockouts for optional electrical outlet installation.
Информация по безопасности
ВНИМАНИЕ: Несоблюдение данных инструкций по технике безопасности может привести к серьезным травмам или повреждению имущества.
- Do not move the workbench with a load on it.
- Не превышайте максимальную грузоподъемность в 1500 фунта.
- Не стойте и не забирайтесь на верстак.
- Ensure all hardware is fully tightened before use.
- Distribute loads evenly across the workbench surface.
- Always adjust leg height on a level surface and ensure all legs are set to the same height.
- Keep hands and fingers clear of pinch points during height adjustment.
- Regularly inspect the workbench for loose hardware or damage. Do not use if damaged.
Изображение: Крупный план view of the warning label affixed to the workbench leg, detailing safety precautions such as not moving with a load, not exceeding load capacity, and ensuring hardware is tightened.
Содержимое упаковки
Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact Global Industrial customer support.
- Workbench Top (1)
- Adjustable C-Channel Legs (Quantity varies by model width, e.g., 4 for 96" width)
- Bench Stringers (Quantity varies by model width)
- Крепежные элементы для сборки (болты, гайки, шайбы)
- Руководство по эксплуатации (данный документ)
Изображение: Подробный view of the workbench top surface, showing the durable tempered hardboard material and its square edge.
Настройка и сборка
Assembly is required for this workbench. It is recommended that two people assist with assembly due to the size and weight of the components.
Необходимые инструменты:
- Набор гаечных ключей или головок
- Измерительная лента
- Уровень
Этапы сборки:
- Распаковываем компоненты: Аккуратно извлеките все детали из упаковки и разложите их на чистой ровной поверхности. Сравните с содержимым упаковки.
- Соберите ноги: Attach the C-channel leg components together using the provided hardware. Ensure all bolts are finger-tight at this stage.
- Attach Stringers: Connect the bench stringers between the assembled leg frames. The stringers provide structural rigidity. Use the provided mounting hardware to secure them.
- Attach Workbench Top: Carefully place the workbench top onto the assembled leg and stringer frame. Align the pre-drilled holes (if applicable) or secure the top to the frame using appropriate fasteners.
- Затяните оборудование: Once all components are aligned and in place, systematically tighten all bolts and nuts securely. Do not overtighten.
- Отрегулировать высоту: Before final placement, adjust the leg height to your desired working level. The legs adjust from 27-7/8" to 35-3/8" in 1" increments. Use the adjustment pins or bolts on each leg. Ensure all legs are set to the same height for a level surface.
- Окончательное размещение: Move the assembled workbench to its final desired location. Ensure it is stable and level.
Image: A fully assembled Global Industrial Adjustable Height Workbench, showcasing its long, rectangular top and sturdy C-channel legs.
Изображение: крупный план view of the adjustable mechanism on one of the workbench legs, showing the holes for height adjustment.
Инструкция по эксплуатации
Регулировка высоты:
- Remove any items from the workbench surface before adjusting height.
- Locate the adjustment pins/bolts on each leg.
- Carefully lift or lower the workbench while simultaneously adjusting each leg to the desired height increment. Ensure all legs are adjusted to the same setting.
- Securely re-insert the adjustment pins or tighten the bolts on all legs.
- Verify the workbench is stable and level before placing items back on it.
Electrical Outlet Installation (Optional):
The adjustable height legs feature removable duplex knockouts for the installation of either a hard-wired electrical outlet or an optional plug-in outlet. This process should only be performed by a qualified electrician or an individual with appropriate electrical knowledge.
- Ensure the workbench is unplugged from any power source if an existing outlet is present.
- Locate the duplex knockouts on the front and rear of the legs.
- Carefully remove the desired knockout(s).
- Install the electrical outlet according to the manufacturer's instructions for the specific outlet type (hard-wired or plug-in).
- Ensure all wiring is secure and properly insulated before use.
Обслуживание
- Уборка: Wipe down the workbench surface and frame with a damp При необходимости используйте ткань и мягкое моющее средство. Избегайте абразивных чистящих средств, которые могут повредить покрытие.
- Проверка оборудования: Periodically check all bolts, nuts, and fasteners to ensure they remain tight. Retighten any loose hardware to maintain stability and safety.
- Уход за поверхностью: The tempered hardboard top is durable but can be protected further by using cutting mats or protective coverings for heavy-duty tasks.
- Предотвращение ржавчины: The steel parts are undercoated to resist rust. However, avoid prolonged exposure to moisture or harsh chemicals to prevent corrosion.
Поиск неисправностей
| Проблема | Возможная причина | Решение |
|---|---|---|
| Верстак шатается или неустойчив. | Loose hardware; uneven floor; legs not adjusted to the same height. | Check and tighten all bolts and nuts. Move workbench to a level surface. Ensure all legs are set to the identical height increment. |
| Возникают трудности с регулировкой высоты ножек. | Load on workbench; adjustment pins/bolts stuck or misaligned. | Remove all items from the workbench. Ensure pins/bolts are fully disengaged. Check for any obstructions in the adjustment holes. |
| Workbench surface appears uneven. | Legs not adjusted to the same height; workbench not on a level surface. | Verify all legs are set to the same height using a measuring tape. Use a level to check the workbench surface and adjust leg heights or relocate the workbench as needed. |
Технические характеристики
| Особенность | Деталь |
|---|---|
| Номер модели | B0847TY999 |
| Бренд | Глобальный промышленный |
| Материал | Engineered Wood (Particleboard Core) Top, Alloy Steel Frame |
| Размеры продукта (общие) | 30"D x 96"W x 35"H (at max height) |
| Регулируемый диапазон высоты | 27-7/8" to 35-3/8" (in 1" increments) |
| Цвет | Black (Frame) |
| Вес товара | 205 фунта |
| Тип отделки | Painted (Frame) |
| Грузоподъемность | 1500 фунта |
| Требуется сборка | Да |
| СКП | 707022034135 |
Гарантия и поддержка
Для получения информации о гарантии или технической поддержке обращайтесь напрямую в компанию Global Industrial. Конкретные условия гарантии указаны в документации к вашей покупке.
Global Industrial Customer Support:
- Webсайт: www.globalindustrial.com
- Телефон: 1-800-645-1232
Note: Contact information is subject to change. Always refer to the official Global Industrial webсайт для получения самой последней информации о поддержке.