ANCEL VD700Pro OBD2 Car Diagnostic Device User Manual

1. Введение

The ANCEL VD700Pro is a professional OBD2 diagnostic device specifically designed for Volkswagen Audi Group (VAG) vehicles. It provides comprehensive system diagnostics and a range of special functions to help users identify and resolve vehicle issues efficiently. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your VD700Pro device.

2. Продукт закончилсяview

The VD700Pro features a 2.8-inch color LCD screen, a silicone keypad for easy navigation, and a robust, drop-resistant casing. It is powered directly from the vehicle's OBDII port.

The ANCEL VD700Pro device showing its main menu, including options for OBDII, VW specific functions, oil reset, and battery check. The screen is a 2.8-inch color LCD.

Основные характеристики:

• Полная системная диагностика автомобилей VAG: Supports reading and clearing fault codes for all major systems including Engine, ABS, Transmission, Airbag, SAS, TPMS, EPB, ESP, Door Electronics, Lamp Control, Air-conditioning, and Battery System.
• 8 специальных функций: Includes Throttle Position Adaption, EPB Replace Brake Pads, Diesel Engine Special Function, Steering Angle Learning, Tire Pressure Reset (TPMS), Injector Adaptation, Battery Registration, and Service Reset (Oil Reset).
• Функции OBD2: Reads and clears fault codes, checks I/M readiness, reads data streams, performs EVAP system tests, and retrieves vehicle identification data.
• Объем батареи в реальном времениtagд Мониторинг: Provides live monitoring of battery voltage.
• Бесплатные обновления на всю жизнь: Software updates are available free of charge from the official ANCEL webсайт.
• Поддержка нескольких языков: Supports 10 display languages.
• 2 Color UI Themes: Offers 'Gem Blue' and 'Sky Gray' interface themes.
• Wide VAG Vehicle Compatibility: Compatible with Volkswagen, Audi, Skoda, Seat, Bentley, Lamborghini, Bugatti, and Scania vehicles.

3. Настройка

3.1 Подключение устройства

1. Найдите 16-контактный диагностический разъём OBDII в вашем автомобиле. Обычно он находится под приборной панелью со стороны водителя.
2. Убедитесь, что зажигание автомобиля выключено.
3. Plug the ANCEL VD700Pro's OBDII connector into the vehicle's diagnostic port. The device will power on automatically.
4. Поверните ключ зажигания автомобиля в положение «ВКЛ» (двигатель может быть выключен).

3.2 Обновления программного обеспечения

To ensure your device has the latest features and vehicle compatibility, it is recommended to perform software updates regularly. Updates are free for life.

1. Посетите официальный сайт ANCEL webсайт.
2. Navigate to the 'Download Center' and select your product model (VD700Pro).
3. Download the update software to a computer running Windows 7, 8, or 10 OS. (Note: macOS is not supported for updates).
4. Connect the VD700Pro device to your computer using the provided USB data cable.
5. Следуйте инструкциям на экране, предоставляемым программой обновления, чтобы завершить процесс.

This image displays the steps for updating the device software to support multiple languages, including logging into the ANCEL official website, selecting the download center, choosing the product model, downloading the language package, connecting the device, and following on-screen instructions.

The ANCEL VD700Pro diagnostic tool is shown connected to a laptop via a USB cable, indicating it is ready for a software update. The laptop screen shows the ANCEL download center.

3.3 Language and UI Theme Selection

You can customize the device's language and user interface theme:

1. В главном меню перейдите в раздел «Настройка инструмента».
2. Select 'Language' to choose from the 10 supported languages.
3. Select 'Skin Style' to switch between 'Gem Blue' and 'Sky Gray' themes.

The device supports 10 languages including English, French, Spanish, German, Russian, Swedish, Portuguese, Finnish, Norwegian, and Danish. It also offers two user interface themes: Gem Blue and Sky Gray.

4. Инструкция по эксплуатации

4.1 Навигация

Use the 'OK' button to confirm selections, 'ESC' to go back, and the arrow keys to navigate through menus and options.

4.2 Full System Diagnostics for VAG Vehicles

The VD700Pro can perform a comprehensive scan of all electronic control units (ECUs) in compatible VAG vehicles.

This diagram highlights the ANCEL VD700Pro's capability for all-system diagnostics on VAG vehicles, covering systems such as Engine, ABS, SAS, Airbag, TPMS, EPB, SRS, and Transmission.

1. From the main menu, select 'For VW' (or similar VAG-specific option).
2. Choose 'Vehicle Scan' to automatically scan all systems for fault codes.
3. Alternatively, select 'System Selection' to manually choose a specific system (e.g., Engine, ABS, Airbag) for diagnosis.
4. The device will display any detected Diagnostic Trouble Codes (DTCs) and their definitions.
5. To clear codes, select the 'Erase Codes' option within the specific system's menu or the main diagnostic menu.

4.3 специальные функции

The VD700Pro offers several special functions for VAG vehicles, which are crucial after replacing components or for routine maintenance.

A visual representation of the nine special functions available on the ANCEL VD700Pro: Oil Service Reset, Throttle Position Adaption, EPB Reset, TPMS Reset, Injector Learning, DPF Reset, Fuel Pump Activation, Battery Registration, and SAS Calibration.

Для доступа к этим функциям:

1. From the main menu, select 'Special Functions'.
2. Choose the desired function from the list:
• Service Reset (Oil Reset): Сбрасывает индикатор сервисного обслуживания масла после его замены.
• Обучение управлению дроссельной заслонкой: Adapts the throttle position after replacement or cleaning.
• Замена тормозных колодок EPB: Safely retracts and engages electronic parking brake calipers for pad replacement.
• Steering Angle Learning: Калибрует датчик угла поворота рулевого колеса.
• Сброс давления в шинах (TPMS): Сбрасывает систему контроля давления в шинах.
• Адаптация форсунки: Кодирует новые значения форсунок в ЭБУ.
• Регистрация батареи: Регистрирует новую батарею в системе управления батареей автомобиля.
• Сброс сажевого фильтра: Сбрасывает систему сажевого фильтра дизельного двигателя.
3. Follow the on-screen prompts to complete the procedure.

4.4 OBD2 Modes

For general OBD2 compliant vehicles (post-2002 with 16-pin OBDII connector), the VD700Pro supports standard OBD2 diagnostic modes.

1. В главном меню выберите «OBDII».
2. Выберите один из следующих вариантов:
• Прочтите коды: Отображает текущие, ожидающие и постоянные диагностические коды неисправностей.
• Коды стирания: Clears all diagnostic trouble codes and turns off the Malfunction Indicator Lamp (МИЛ).
• I / M Готовность: Проверяет готовность средств контроля выбросов.
• Поток данных: Отображает данные с датчиков в режиме реального времени в текстовом или графическом формате.
• Проверка системы испарения: Начинает проверку системы контроля выбросов испарений.
• Информация об автомобиле: Извлекает идентификационный номер транспортного средства (VIN), идентификатор калибровки (CALID) и номер проверки калибровки (CVN).

4.5 Real-time Battery Voltage Мониторинг

The device can monitor your vehicle's battery voltagе в реальном времени.

1. From the main menu, select 'BAT' (Battery Check).
2. Follow the on-screen instructions, which may include starting the engine for a charging system test.
3. The device will display current, minimum, and maximum voltage readings over time.

5. Техническое обслуживание

The ANCEL VD700Pro is designed for durability, but proper care ensures its longevity and performance.

• Уборка: Для чистки устройства используйте мягкую сухую ткань. Избегайте использования абразивных чистящих средств и растворителей.
• Хранилище: Храните устройство в сухом, прохладном месте, вдали от прямых солнечных лучей и экстремальных температур.
• Обновления программного обеспечения: Regularly update the device software as described in Section 3.2 to maintain optimal functionality and compatibility.

6. Поиск Неисправностей

If you encounter issues with your ANCEL VD700Pro, refer to the following common troubleshooting steps:

• Устройство не включается: Ensure the device is securely connected to the vehicle's 16-pin OBDII port. Check the vehicle's ignition is in the 'ON' position. Verify the vehicle's battery has sufficient charge.
• Ошибка связи: Ensure the vehicle is OBDII compliant and manufactured after 2002. Check for loose connections at the OBDII port. Try the device on another compatible vehicle to rule out a vehicle-specific issue.
• Update Software Issues: Ensure your computer runs Windows 7, 8, or 10. Verify a stable internet connection. Re-download the update software from the official ANCEL webсайт.
• Incorrect Readings/Functions Not Working: Ensure the correct vehicle model and year are selected if prompted. Some older VAG protocols may require manual handling; refer to the detailed user manual for specific instructions.

For specific Diagnostic Trouble Code (DTC) definitions, the device has a built-in DTC lookup library. For further assistance, contact ANCEL customer support.

7. Технические характеристики

8. Гарантия и поддержка

The ANCEL VD700Pro comes with a commitment to customer satisfaction and ongoing support.

• Бесплатные обновления на всю жизнь: Benefit from continuous software updates to ensure your device remains current with the latest vehicle models and diagnostic capabilities.
• Служба поддержки клиентов: For any questions, technical assistance, or support needs, please contact ANCEL customer service through Amazon messages. Provide your model, year of manufacture, VIN information, and desired functions for efficient support.