Phanteks Eclipse P400A Digital ATX Mid-tower Instruction Manual

1. Введение

This manual provides detailed instructions for the Phanteks Eclipse P400A Digital ATX Mid-tower chassis. It covers essential information regarding the product's features, setup, operation, and maintenance to ensure optimal performance and longevity. The Eclipse P400A is designed for high airflow and features a full metal mesh front panel, tempered glass side panel, and integrated Digital-RGB lighting.

2.Основные характеристики

• Оптимальная эффективность охлаждения: Features an ultra-fine performance mesh front panel for maximum airflow and a tempered glass side panel.
• Просторный салон: Supports up to E-ATX motherboards, 280/360mm radiators in the front, and vertical GPU mounting (with optional bracket PH-VGPUKT_02).
• Integrated Digital-RGB Controller: Includes three pre-installed D-RGB fans that can sync with compatible motherboards for customizable lighting effects.
• Extensive Storage Options: Provides six HDD positions (two trays included) and eight SSD mounting locations (two dedicated brackets included).
• Easy Accessibility I/O: Front panel includes 2x USB 3.0 ports, microphone and headphone jacks, power button, reset button, and D-RGB controller.

3. Настройка и установка

Before beginning installation, ensure all components are accounted for and refer to your motherboard and component manuals for specific installation procedures. Always handle components with care and use anti-static precautions.

3.1 Unpacking the Chassis

Carefully remove the chassis from its packaging. Inspect for any damage during transit. Retain the packaging for future transport or storage.

Figure 3.1: Phanteks Eclipse P400A Digital ATX Mid-tower (White)

3.2 Снятие боковых панелей

The tempered glass side panel is secured with thumbscrews. Carefully unscrew these and gently remove the panel. The opposite side panel can also be removed for cable management access.

3.3 Установка материнской платы

1. Install the I/O shield into the rear opening of the chassis.
2. Align your ATX, micro-ATX, or mini-ITX motherboard with the pre-installed standoffs. For E-ATX motherboards up to 272mm wide, ensure optional HDD trays are not in use.
3. Закрепите материнскую плату прилагаемыми винтами.

3.4 Установка компонентов

• Видеокарта (GPU): Install your graphics card into the appropriate PCIe slot on the motherboard. The case supports GPUs up to 420mm in length. Vertical GPU mounting is supported with the optional PH-VGPUKT_02 bracket.
• Процессорный кулер: Install your CPU cooler. The case accommodates CPU coolers up to 160mm in height.
• Накопители данных: Utilize the dedicated SSD brackets and HDD trays for 2.5-inch and 3.5-inch drives respectively. The case offers extensive storage options with 6x HDD and 8x SSD mounting locations.
• Блок питания (БП): Install the PSU in the designated compartment. The PSU clearance is 270mm.

3.5 Управление кабелями

The chassis provides 25mm of space for cable management behind the motherboard tray. Utilize the included velcro ties and routing channels to organize cables for improved airflow and aesthetics.

4. Операция

4.1 Передняя панель ввода/вывода

The top front panel provides convenient access to essential controls and ports:

• Кнопка питания: Нажмите, чтобы включить или выключить систему.
• Кнопка сброса: Нажмите, чтобы перезагрузить систему.
• Порты USB 3.0 (x2): Подключайте устройства, совместимые с USB 3.0, для высокоскоростной передачи данных.
• Разъем для микрофона: Подключите микрофон.
• Порт для наушников: Подключите наушники или динамики.
• D-RGB Controller Buttons: Used to cycle through various Digital-RGB lighting modes and colors for the pre-installed fans and compatible D-RGB products.

Figure 4.1: Front I/O Panel Overview

4.2 Digital-RGB Lighting Control

The integrated D-RGB controller allows for direct control of the lighting effects. Alternatively, if your motherboard supports Digital-RGB synchronization, you can connect the case's D-RGB cables to your motherboard's header and control lighting via motherboard software.

5. Техническое обслуживание

5.1 Очистка пылевых фильтров

To maintain optimal airflow and cooling performance, regularly clean the dust filters. The front mesh panel is designed for easy removal and cleaning. Other filters, such as those for the top and bottom fan mounts, should also be checked and cleaned periodically.

1. Gently pull the front mesh panel to detach it.
2. Use a soft brush or compressed air to remove accumulated dust.
3. Reattach the panel securely.

5.2 Генеральная уборка

Wipe the exterior surfaces of the chassis with a soft, damp Используйте ткань. Избегайте использования агрессивных химикатов или абразивных материалов, которые могут повредить покрытие или закаленное стекло.

6. Поиск Неисправностей

• Вентиляторы не вращаются/подсветка RGB не включается:
  • Убедитесь, что все кабели питания вентиляторов надежно подключены к разъемам для подключения вентиляторов на материнской плате или к контроллеру вентиляторов.
  • Verify that the D-RGB cables are correctly connected to the integrated controller or the motherboard's D-RGB header.
  • Проверьте настройки BIOS/UEFI вашей материнской платы или программное обеспечение для управления RGB-подсветкой, чтобы узнать скорость вращения вентиляторов и самими настройками.
• Плохой воздушный поток/Высокие температуры:
  • Clean all dust filters, especially the front mesh panel.
  • Убедитесь, что вентиляторы правильно ориентированы для оптимального притока и оттока воздуха.
  • Verify that there are no obstructions to airflow inside the case, such as poorly managed cables.
• Передние порты ввода/вывода не работают:
  • Check that all front panel connectors (USB, audio, power, reset) are correctly plugged into the corresponding headers on your motherboard.

7. Технические характеристики

8. Гарантия и поддержка

Specific warranty details are not provided in this document. For warranty information, technical support, or further assistance, please visit the official Phanteks website or contact their customer service directly. Ensure you have your product model number (PH-EC400ATG_DWT01) and proof of purchase available when seeking support.

Официальный Phanteks Webсайт: www.phanteks.com