Введение
This manual provides detailed instructions for the proper installation, operation, and maintenance of your Moen Sage DN6886BN Towel Ring and DN6822BN 24-Inch Double Towel Bar. Please read all instructions carefully before beginning installation to ensure a secure and lasting setup. Retain this manual for future reference.

Image: The Moen Sage Towel Ring and 24-Inch Double Towel Bar, both in a brushed nickel finish, displayed together.
Содержимое упаковки
Перед началом установки убедитесь, что все компоненты присутствуют:
- Moen Sage DN6886BN Towel Ring Assembly
- Moen Sage DN6822BN 24-Inch Double Towel Bar Assembly
- Mounting Hardware (screws, anchors, mounting plates)
- Шестигранный ключ (для установочных винтов)
- Installation Template (may be included)
Инструменты, необходимые для установки
The following tools are typically required for a successful installation:
- Отвертка с крестообразным шлицем
- Drill with appropriate drill bit (e.g., 1/4 inch for drywall anchors)
- Карандаш
- Уровень
- Измерительная лента
- Hammer (for drywall anchors)
Инструкция по установке
Follow these steps carefully for installing both the towel ring and the double towel bar. The general procedure is similar for both items.
Step 1: Prepare the Mounting Location
- Determine the desired location for your towel ring and towel bar. Ensure there is sufficient clearance for towels.
- Use a level and pencil to mark the exact mounting points on the wall. If an installation template is provided, tape it to the wall and mark through the designated holes.
Шаг 2: Установите монтажные кронштейны
- Для установки гипсокартона: Drill pilot holes at the marked locations using the recommended drill bit size for your drywall anchors. Insert the drywall anchors until flush with the wall surface.
- Для установки деревянных стоек: Drill pilot holes directly into the wood stud at the marked locations.
- Position the mounting bracket over the installed anchors or pilot holes. Secure the bracket to the wall using the provided screws and a Phillips head screwdriver. Ensure the bracket is firmly attached and level.

Изображение: Подробный view of the mounting base for the Moen Sage double towel bar, showing the connection point to the wall.
Step 3: Attach the Fixture
- Align the towel ring or towel bar fixture with the installed mounting bracket.
- Secure the fixture to the mounting bracket using the small set screw located on the underside of the fixture's base. Use the provided hex wrench to tighten the set screw until the fixture is snug and does not wobble. Do not overtighten.

Image: A close-up of the Moen Sage towel ring, highlighting its base and connection point.
Операция
The Moen Sage Towel Ring and Double Towel Bar are designed for holding towels and other lightweight bathroom accessories. Ensure items are placed securely to prevent them from falling.

Image: The Moen Sage towel ring holding a white hand towel, mounted on a light green paneled wall.

Image: The Moen Sage 24-inch double towel bar holding a white bath towel, mounted on a light green paneled wall.
Уход и обслуживание
To maintain the finish of your Moen Sage accessories, follow these guidelines:
- Регулярно чистите мягкой тряпкой.amp ткань.
- Avoid using abrasive cleaners, harsh chemicals, or polishes, as these can damage the brushed nickel finish.
- Do not use cleaners containing ammonia, bleach, or alcohol.
- Чтобы избежать появления пятен от воды, сразу после чистки вытрите насухо.
Поиск неисправностей
| Проблема | Возможная причина | Решение |
|---|---|---|
| Fixture is loose or wobbly. | Set screw is not tightened sufficiently. Mounting bracket is not secure. | Tighten the set screw with the hex wrench. If still loose, remove the fixture and ensure the mounting bracket is securely fastened to the wall. Re-tighten mounting screws or replace anchors if damaged. |
| Scratches or damage to finish. | Abrasive cleaning materials used. Impact from hard objects. | Use only soft cloths and non-abrasive cleaners. Avoid contact with sharp or hard objects. Minor scratches may be buffed with a non-abrasive cloth, but deep scratches may require professional attention or replacement. |
Технические характеристики
- Бренд: Моен
- Модели: DN6886BN (Towel Ring), DN6822BN (Double Towel Bar)
- Заканчивать: Матовый никель
- Материал: Stainless Steel or Solid Brass
- Тип установки: Ввинчивающийся
- Towel Bar Length: 24-Inch (DN6822BN)
Гарантия и поддержка
Moen products are manufactured under the highest standards of quality and workmanship. This product is backed by Moen's Limited Lifetime Warranty against leaks, drips, and finish defects to the original consumer purchaser. For complete warranty details or technical assistance, please visit the official Moen website or contact Moen customer service.
Служба поддержки клиентов Moen:
- Webсайт: www.moen.com
- Телефон: Обратитесь к официальному сайту Moen. webсайт для получения актуальных контактных номеров.