1. Введение
The Inkbird ITC308S is a reliable and easy-to-use temperature controller designed for precise temperature management in various applications, particularly aquariums. It features dual relay outputs for both heating and cooling devices, ensuring stable temperature control. The unit includes a fully submersible probe for accurate temperature readings in liquid environments.
2. Информация по технике безопасности
- Ensure the power supply matches the controller's requirements (110V for this model).
- Do not immerse the main controller unit in water. Only the probe is submersible.
- Всегда отключайте питание перед выполнением любого обслуживания или установки.
- Держите устройство в недоступном для детей и домашних животных месте.
- Не используйте устройство, если какая-либо его часть повреждена.
3. Содержимое упаковки
- ITC308S Temperature Controller Unit
- Submersible Temperature Probe
- Suction Cup for Probe Mounting
- Руководство пользователя
Рисунок 3.1: The Inkbird ITC308S Temperature Controller and its included accessories, packaged in a brown box.
4. Продукт закончилсяview
The ITC308S features a main control unit with a dual LED display, showing both the present value (PV) and set value (SV) temperatures. It has dedicated outlets for heating and cooling devices, and a detachable submersible probe for accurate temperature sensing.
Рисунок 4.1: Надview of the Inkbird ITC308S controller, showing the display, control buttons, power cord, and probe connection.
Рисунок 4.2: The dual power outlets, clearly marked for 'HEATING' and 'COOLING' devices.
Рисунок 4.3: The submersible temperature probe, designed for accurate readings in water, shown with its suction cup.
5. Технические характеристики
| Особенность | Деталь |
|---|---|
| Модель | ITC-308S |
| Томtage | 120 вольт (переменный ток) |
| Максимальная выходная нагрузка | 1200 Вт (110 В) |
| Режим контроля температуры | On/Off Control (Heating and Cooling) |
| Тип зонда | Fully Submersible Aquarium Probe |
| Тип дисплея | LED Dual Display |
| Материал | Пластик |
| Цвет | Green, Gray and White |
6. Инструкции по настройке
- Подключите зонд: Plug the submersible temperature probe into the designated port on the main controller unit. Use the provided suction cup to secure the probe inside your aquarium or water bath, ensuring it is fully submerged and away from direct heat sources or strong currents.
- Подключение устройств отопления/охлаждения: Plug your heating device (e.g., aquarium heater) into the 'HEATING' outlet and your cooling device (e.g., cooling fan) into the 'COOLING' outlet on the power strip. Ensure devices are rated within the controller's maximum output load (1200W).
- Включение питания: Plug the main power cord of the ITC308S controller into a standard 110V AC power outlet. The LED display will illuminate, showing the current temperature (PV) and the set temperature (SV).
Рисунок 6.1: The submersible probe correctly placed within an aquarium, ensuring accurate temperature measurement.
7. Инструкция по эксплуатации
- View Current Temperature (PV): The upper LED display shows the current measured temperature (Process Value).
- View Заданная температура (SV): The lower LED display shows the desired set temperature (Set Value).
- Установить температуру:
- Нажмите НАБОР Нажмите кнопку один раз. Дисплей SV начнет мигать.
- Используйте Вверх (▲) or Вниз (▼) кнопки для регулировки желаемой температуры.
- Нажимать НАБОР Повторите запрос для подтверждения и сохранения настройки или подождите несколько секунд, пока она сохранится автоматически.
- Heating/Cooling Indication: The 'HEATING' or 'COOLING' indicator lights will illuminate when the respective outlet is active.
- Калибровка температуры: Refer to the detailed instructions in the included paper manual for advanced settings like temperature calibration, differential settings, and alarm parameters. These settings allow fine-tuning of the controller's response.
- Сигнализация: The controller features over-temperature and sensor fault alarms. If an alarm triggers, the display will show an error code (e.g., 'HHH' for over-temperature, 'LLL' for under-temperature, 'ERR' for sensor fault) and an audible alert may sound. Address the issue promptly.
8. Техническое обслуживание
- Очистка зонда: Regularly inspect and clean the submersible probe to prevent algae or mineral buildup, which can affect accuracy. Use a soft cloth and mild cleaning solution if necessary.
- Блок контроллера: Wipe the main controller unit with a dry, soft cloth. Do not use abrasive cleaners or immerse it in water.
- Проверка кабеля: Periodically check all cables for any signs of wear, cuts, or damage. Replace if necessary.
9. Поиск Неисправностей
| Проблема | Возможная причина | Решение |
|---|---|---|
| Дисплей пустой | Нет питания | Проверьте подключение к сети и розетку. |
| Показания температуры неточны | Probe dirty or improperly placed; calibration needed | Clean probe, ensure proper submersion, perform temperature calibration. |
| Heating/Cooling device not turning on | Device not plugged in correctly; controller settings incorrect; device malfunction | Verify device connection to correct outlet, check set temperature and differential, test device independently. |
| Сигнализация срабатывает часто | Temperature outside set range; alarm limits too narrow | Adjust set temperature or alarm high/low limits. Ensure heating/cooling devices are functioning. |
| 'ERR' displayed | Неисправность датчика | Check probe connection. If error persists, the probe may need replacement. |
10. Гарантия и поддержка
Inkbird products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact details provided in your product packaging or visit the official Inkbird webсайт. Сохраните чек о покупке на случай гарантийных претензий.