1. Введение
The FTVOGUE Polypropylene Water Level Sensor Vertical Float Switch is designed for reliable and automatic liquid level control. This device is suitable for a wide range of applications, including water supply, drainage systems, and automatic liquid level control in various tanks or reservoirs. Its robust construction ensures stable performance and long service life.
2. Информация по технике безопасности
- Always disconnect power to the pump or system before installation, maintenance, or troubleshooting.
- Убедитесь, что все электрические соединения должным образом изолированы и защищены от влаги.
- Не превышайте указанные электрические характеристики выключателя.
- Operate within the recommended temperature range of 30°C to 80°C. Avoid temperatures above 85°C.
- Если вы не уверены в своих знаниях об электропроводке, установку следует выполнять квалифицированным персоналом.
3. Продукт закончилсяview
This vertical float switch is constructed from high-quality polypropylene, offering strong anti-interference capabilities, high stability, and resistance to corrosion. Its compact size facilitates easy installation and integration into existing systems.
Основные характеристики:
- Материал: High-quality Polypropylene
- Прочность: Non-toxic, corrosion-resistant, strong anti-interference ability
- Стабильность: High stability and long service life
- Установка: Small size, simple wiring, easy to install and use
- Энергоэффективность: Низкое энергопотребление
- Рабочая температура: 30°C to 80°C (maximum 85°C)
Figure 3.1: FTVOGUE Vertical Float Switch, showing the main body and yellow connecting wires.
Рисунок 3.2: Сторона view of the float switch, highlighting its polypropylene construction and compact design.
4. Технические характеристики
| Спецификация | Ценить |
|---|---|
| Бренд | ФТВОГУЕ |
| Номер модели | FTVOGUEfbmo2hzndy |
| Материал | Полипропилен |
| Вес товара | 10 г |
| Размеры продукта | 6.8 х 2.5 х 2.5 см |
| Рабочая температура | 30°C to 80°C (max 85°C) |
| Требуются батареи | Нет |
| Страна происхождения | Китай |
5. Настройка и установка
Proper installation is crucial for the accurate and reliable operation of the float switch. This device is designed for vertical mounting.
Этапы установки:
- Выберите место: Select a suitable location within the tank or reservoir where the liquid level needs to be monitored. Ensure the float can move freely without obstruction.
- Монтаж: Securely mount the float switch in a vertical position. The threaded portion of the switch is designed for easy integration into a compatible fitting. Use the provided sealing washer to ensure a watertight seal.
- Проводка: Connect the two yellow wires of the float switch to your pump control circuit. The switch acts as a simple open/close contact. Consult your pump's wiring diagram for specific connection points for liquid level control.
- Тест: After installation and wiring, carefully restore power and test the switch by manually raising and lowering the liquid level (or simulating it) to ensure it activates and deactivates the pump as intended.
Figure 5.1: The float switch shown in its intended vertical mounting orientation.
Figure 5.2: Close-up of the wiring connections on the float switch.
6. Инструкция по эксплуатации
The FTVOGUE Vertical Float Switch operates based on the principle of buoyancy. As the liquid level changes, the internal float moves, activating or deactivating an electrical contact.
Операция:
- When the liquid level rises, the float moves upwards. At a predetermined level, the float's movement triggers an internal switch.
- When the liquid level falls, the float moves downwards. At a predetermined level, the float's movement triggers the internal switch in the opposite direction.
- This switching action can be used to start or stop a pump, activate an alarm, or control other devices based on the liquid level.
- The switch can be configured for either normally open (NO) or normally closed (NC) operation depending on your wiring and application requirements.
7. Техническое обслуживание
The FTVOGUE float switch is designed for minimal maintenance due to its durable polypropylene construction. However, periodic inspection is recommended to ensure optimal performance.
Советы по обслуживанию:
- Визуальный осмотр: Regularly check the float switch for any signs of physical damage, wear, or accumulation of debris that might impede float movement.
- Уборка: If operating in environments with suspended solids or viscous liquids, periodically clean the float and stem to prevent buildup. Use mild soap and water; avoid harsh chemicals.
- Проверка проводки: Убедитесь, что все электрические соединения надежно закреплены и не подвержены коррозии.
- Тест функциональности: Periodically test the switch's operation by observing its response to changing liquid levels.
8. Поиск Неисправностей
If the float switch is not operating as expected, consider the following common issues and solutions:
| Проблема | Возможная причина | Решение |
|---|---|---|
| Переключатель не включается/выключается | Неправильная проводка | Verify wiring against your pump control circuit diagram. |
| Поплавок заблокирован | Check for debris or physical obstructions preventing float movement. Clean if necessary. | |
| Неисправный переключатель | Test the switch with a multimeter for continuity. Replace if faulty. | |
| Inconsistent switching | Debris on float/stem | Clean the float and stem thoroughly. |
| Excessive turbulence | Consider installing a baffle or stilling tube around the float switch to reduce turbulence. |
9. Гарантия и поддержка
For warranty information or technical support, please contact FTVOGUE customer service through the retailer where the product was purchased or visit the official FTVOGUE brand store online. Please have your model number (FTVOGUEfbmo2hzndy) and purchase details ready when contacting support.
FTVOGUE is committed to providing quality products and customer satisfaction. For more information about FTVOGUE products, you can visit the FTVOGUE Store.