SECRUI D017 Add-On Door Contact Sensor Unit Instruction Manual

1. Введение

This manual provides instructions for the SECRUI D017 Add-On Door Contact Sensor Unit. Please note that this unit is an expansion component and does not function independently. It requires a compatible SECRUI receiver, such as models M508 or M520, to operate as part of a complete security system.

The D017 sensor is designed to detect the opening and closing of doors or windows, sending a signal to a paired receiver to trigger an alert. Its wireless design ensures easy installation and flexible placement.

2. Продукт закончилсяview

2.1 Компоненты

The SECRUI D017 Add-On Door Contact Sensor Unit package includes the following:

• 1 × Sensor Unit (main part with LED indicator)
• 1 × Magnet Part
• 1 × 12V Battery (pre-installed in sensor)
• 1 × клейкая лента
• 2 × Винты
• 2 × якоря
• 1 × Руководство пользователя (этот документ)

Image: Contents of the SECRUI D017 Add-On Door Contact Sensor Unit package, including the main sensor, magnet, adhesive, screws, and anchors.

2.2 Основные характеристики

• Add-On Unit: Designed to expand an existing SECRUI wireless alarm system (requires compatible receiver like M508 or M520).
• Простая установка: No wiring required, offering flexible placement with adhesive tape or screws.
• Светодиодный индикатор: Provides a visual alert for sensor activation and battery status.
• Беспроводная работа: Ensures convenience and portability for various applications.
• Расстояние активации: Sensor activates when the main unit and magnet are separated by less than 0.6 inches (1.5 cm).

Image: The SECRUI D017 Add-On Door Contact Sensor Unit, showing the main sensor component and its smaller magnet counterpart.

3. Настройка и установка

The D017 sensor is designed for straightforward installation. Ensure you have a compatible SECRUI receiver (e.g., M508, M520) already set up and ready for pairing.

3.1 Сопряжение с приемником

Before mounting, the sensor must be paired with your SECRUI receiver. Refer to your receiver's instruction manual for specific pairing steps. Typically, this involves putting the receiver into pairing mode and then activating the sensor (e.g., by separating and rejoining the sensor and magnet parts) to register it with the receiver. Each receiver can be paired with up to 40 D017 transmitters.

3.2 Mounting the Sensor Unit

The sensor unit consists of two parts: a larger main sensor and a smaller magnet. These two parts must be installed on a door/window and its frame, aligned with each other, and separated by no more than 0.4 inches (10mm) when the door/window is closed.

Изображение: Бывшийamples of how the D017 sensor can be installed on different types of doors and windows, demonstrating versatile placement options.

You can choose between adhesive tape mounting or screw mounting:

• Крепление с помощью клейкой ленты:
  1. Clean the surface where the sensor will be mounted to ensure it is dry and free of dust.
  2. Peel off the protective backing from the adhesive tape and firmly press the main sensor part onto the desired location on the door or window frame.
  3. Align the magnet part with the main sensor part, ensuring the alignment marks are matched, and attach it to the door or window using its adhesive tape. The gap between the two parts should be less than 0.4 inches (10mm) when closed.
• Винтовое крепление:
  1. Separate the back plate from the main sensor unit.
  2. Position the back plate on the door or window frame and mark the screw holes.
  3. Drill pilot holes if necessary and secure the back plate with the provided screws and anchors.
  4. Slide the main sensor unit onto the secured back plate.
  5. Align the magnet part with the main sensor part, ensuring the alignment marks are matched, and attach it to the door or window using its adhesive tape or screws. The gap between the two parts should be less than 0.4 inches (10mm) when closed.

Image: Visual guide illustrating both screw mounting and double-sided tape mounting methods for the D017 sensor, highlighting the importance of a small installation gap.

3.3 Советы по установке

• Ensure the main sensor unit and magnet are installed on the same plane and are aligned.
• The activation gap between the sensor and magnet should be less than 0.4 inches (10mm) for reliable detection.
• Test the sensor after installation by opening and closing the door/window to confirm the receiver triggers an alert.

4. Операция

Once installed and paired with a compatible SECRUI receiver, the D017 sensor operates automatically.

• Обнаружение: When the door or window to which the sensor is attached opens, the main sensor unit and the magnet part separate. If the separation distance exceeds approximately 0.6 inches (1.5 cm), the sensor will transmit a signal to the paired receiver.
• Тревога: Upon receiving the signal, the receiver will activate its programmed chime or alarm sound, and its LED indicator may flash.
• Светодиодный индикатор: The small LED on the main sensor unit will briefly flash when activated, indicating that a signal has been sent.

Image: The D017 sensor installed on a door, demonstrating how the receiver triggers an alert when the sensor and magnet parts are separated.

4.1 Демонстрационное видео системы

Video: This official seller video demonstrates the setup and operation of a SECRUI wireless door alarm system, including the interaction between the sensor and receiver. Note that this product is only the add-on sensor, and a receiver is sold separately.

5. Техническое обслуживание

5.1. Замена батареи

The D017 sensor is powered by one 12V 23A Alkaline battery. When the battery is low, the sensor's performance may degrade, or it may stop transmitting signals. Replace the battery as follows:

1. Carefully remove the main sensor unit from its mounting location (if screw-mounted, detach from the back plate; if adhesive-mounted, gently pry it off).
2. Open the battery compartment cover, usually located on the back or side of the main sensor unit.
3. Извлеките старую батарею 12 В 23 А.
4. Insert a new 12V 23A Alkaline battery, ensuring the correct polarity (+/-).
5. Close the battery compartment cover and re-mount the sensor unit.
6. Test the sensor to ensure it is functioning correctly with the receiver.

Image: A visual guide demonstrating the steps for replacing the 12V battery within the D017 sensor unit.

5.2 Очистка

Wipe the sensor unit with a soft, dry cloth to remove dust or dirt. Do not use liquid cleaners or abrasive materials, as these can damage the unit.

6. Поиск Неисправностей

If your SECRUI D017 sensor is not functioning as expected, consider the following:

• Датчик не срабатывает:
  • Check the gap between the main sensor and magnet. It must be less than 0.4 inches (10mm) when closed and separate by more than 0.6 inches (1.5 cm) to trigger.
  • Ensure the sensor and magnet are properly aligned.
  • Verify the battery in the sensor is not depleted. Replace if necessary.
• Приёмник не отправляет оповещение:
  • Confirm the sensor is correctly paired with the receiver. Re-pair if unsure.
  • Check the receiver's power supply and ensure it is plugged in and functioning.
  • Ensure the receiver's volume is not set to mute or a very low level.
  • The sensor and receiver might be out of range. Try moving the receiver closer to the sensor or removing obstructions.
• Ложные тревоги:
  • Ensure the sensor and magnet are securely mounted and do not shift with vibrations or movement.
  • Check for any magnetic interference near the sensor.

If issues persist, consult the full manual for your SECRUI receiver or contact customer support.

7. Технические характеристики

Image: Detailed dimensions of the SECRUI D017 sensor unit and its magnet part.

8. Гарантия и поддержка

For warranty information and customer support, please refer to the documentation included with your complete SECRUI wireless alarm system or visit the official SECRUI webВы также можете обратиться за помощью к своему продавцу.

For further inquiries, please reach out to SECRUI customer service through their official channels.