JEKCA Present Box ST17PB01-S01 Building Blocks Instruction Manual

1. Введение

This manual provides detailed instructions for assembling your JEKCA Present Box ST17PB01-S01 building block set. The JEKCA system utilizes a unique interlocking brick-through technology to create sturdy and durable models without the need for glue. Please read all instructions carefully before beginning assembly.

Figure 1.1: Fully assembled JEKCA Present Box ST17PB01-S01.

Figure 1.2: Dimensions of the assembled JEKCA Present Box ST17PB01-S01.

2. Информация по технике безопасности

• Рекомендация по возрасту: Этот продукт рекомендуется лицам в возрасте от 14 лет и старше.
• Мелкие детали: The set contains small parts which may pose a choking hazard. Keep out of reach of young children.
• Наблюдение взрослых: Во время сборки рекомендуется присутствие взрослых, особенно для детей младшего возраста.
• Правильное использование: Use the included pin driver tool as instructed. Do not use excessive force or substitute tools.

3. Компоненты закончилисьview

Before starting assembly, ensure all components listed below are present in your package. If any parts are missing, please contact customer support.

• Bricks: Various shapes and colors of plastic building blocks (over 770 pieces).
• Контакты: Small plastic pins used to secure bricks together.
• Pin Driver: A specialized tool for inserting and removing pins.
• Инструкция по эксплуатации: Этот документ.
• Краткое руководство: A supplementary guide for basic assembly principles.

Рисунок 3.1: Example of JEKCA building bricks.

4. Инструкция по сборке

4.1 Understanding the Interlocking System

JEKCA building blocks utilize a patented interlocking brick-through technology. This system involves inserting pins through the bricks to create a strong, stable connection. The pins are crucial for the structural integrity of your model.

Figure 4.1: Illustration of the JEKCA interlocking brick-through system.

4.2 Step-by-Step Assembly Process

Follow the included graphical instruction manual for the specific build sequence of the Present Box. The general steps for connecting bricks are as follows:

1. Position Bricks: Place the two bricks you wish to connect directly on top of each other, aligning their holes.
2. Вставьте штифт: Take a pin and insert it into the aligned holes.
3. Secure with Pin Driver: Use the pin driver tool to push the pin completely through the bricks until it is flush or slightly recessed. For a secure connection, sometimes a 90-degree turn of the pin driver is needed to fully seat the pin.

Figure 4.2: Basic steps for inserting and securing a pin.

Figure 4.3: Detailed illustration of the JEKCA interlocking mechanism.

Figure 4.4: Demonstrating the use of the pin driver tool.

Continue following the specific instructions provided in your separate graphical building manual to complete the Present Box model. The JEKCA system allows for a sturdy construction that is not easily broken apart once assembled correctly.

Figure 4.5: The JEKCA Present Box ST17PB01-S01 with its lid open.

5. Уход и обслуживание

• Уборка: To clean your JEKCA model, gently wipe it with a soft, damp Используйте ткань. Избегайте применения агрессивных химикатов или абразивных чистящих средств, так как они могут повредить пластик.
• Хранилище: Store your assembled model or unbuilt bricks in a cool, dry place away from direct sunlight to prevent discoloration or warping.
• Разборка: If you need to disassemble parts of your model, carefully use the pin driver to push the pins out. Avoid pulling bricks apart forcefully without removing the pins first.

6. Поиск Неисправностей

• Bricks Not Fitting: Ensure the bricks are correctly aligned before attempting to insert a pin. Do not force misaligned bricks.
• Pins Not Securing: Make sure the pin is fully inserted and seated. Sometimes a slight twist with the pin driver can help secure it. If a pin is bent, replace it with a new one.
• Недостающие части: Carefully check all packaging materials. If pieces are genuinely missing, refer to the customer support section for assistance.
• Нестабильность модели: Review the assembly steps to ensure all pins are correctly inserted and secured according to the instructions. Incomplete pin insertion can lead to a less stable model.

7. Технические характеристики

8. Поддержка клиентов

For further assistance, missing parts, or inquiries regarding your JEKCA Present Box ST17PB01-S01, please contact JEKCA customer support through their official webсайт или розничный продавец, где был приобретен товар.

Политика возврата: This product is subject to a 30-day refund/replacement return policy from the date of purchase. Please refer to your purchase receipt or retailer's policy for specific details.