Введение
The LUME CUBE Suction Cup Mount is designed to provide a versatile and secure attachment solution for your Lume Cube light. This mount allows you to easily position your Lume Cube on any flat, non-porous surface, such as tables, glass, or even the back of a smartphone, enhancing your lighting options for various recording scenarios.
Что в коробке?
- Suction Cup Mount (Model LC-SCUP11)
Note: Lume Cube lights are sold separately.
Настройка и сборка
- Attach Lume Cube to Mount: The Suction Cup Mount features a 1/4"-20 mounting screw. Align the screw with the mounting hole on your Lume Cube light and rotate the Lume Cube clockwise until it is securely fastened.
Image: A Lume Cube light is shown attached to the top of the suction cup mount, ready for use.
- Размещение крепления: The mount includes a tilting ball head and offers 360° rotation, allowing for flexible adjustment of your Lume Cube's angle and direction. Loosen the adjustment knob, position the light as desired, and then tighten the knob to secure.
Operating the Suction Cup
- Подготовка поверхности: Ensure the surface where you intend to attach the suction cup is clean, dry, and smooth. Dust or debris can reduce suction effectiveness.
- Прикрепите присоску: Press the suction cup firmly against the desired flat surface.
Image: A hand holds the suction cup mount, illustrating its size and how it can be positioned on a device like a smartphone.
- Engage the Suction Lock: Flip the small latch on the side of the suction cup down. This action creates a vacuum, securely locking the mount to the surface.
Image: The suction cup mount is shown firmly attached to the back of an iPhone, with the latch engaged for secure placement.
Image: A Lume Cube light is positioned on top of an iPhone, held by the suction cup mount, demonstrating a common use case.
- Release the Suction: To remove the mount, simply flip the latch back up. This releases the vacuum, allowing you to easily detach the suction cup from the surface.
Обслуживание
If the suction cup loses its stickiness due to dust or debris, simply wash it with water and allow it to air dry. This will restore its adhesive properties.
Технические характеристики
| Особенность | Деталь |
|---|---|
| Бренд | ЛЮМ КУБ |
| Номер модели | LC-SCUP11 |
| Цвет | Черный |
| Совместимые устройства | Люм-Куб |
| Тип крепления | Wall Mount (Suction) |
| Специальная характеристика | Вращающийся |
| Уровень водонепроницаемости | Не водостойкий |
| Размеры изделия (ДхШхВ) | 2.36 x 2.36 x 1.97 дюйма |
| Вес товара | 60 грамм |
| Материал | Glass (referring to the suction cup material, though the body is likely plastic/rubber) |
| СКП | 855239006732 |
Поиск неисправностей
- Присоска не держит: Ensure the surface is clean, dry, and smooth. Wash the suction cup with water if it appears dirty or has lost its stickiness.
- Light not staying in position: Tighten the adjustment knob on the ball head to secure the Lume Cube at the desired angle.
Гарантия и поддержка
For warranty information or technical support, please refer to the official LUME CUBE webили обратитесь в службу поддержки напрямую. Сохраните чек о покупке для предъявления гарантийных претензий.