1. Введение
This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your Greencut PP560L 56V Cordless Lithium-Ion Pole Saw. Please read this manual thoroughly before using the product and keep it for future reference.
The Greencut PP560L is a lightweight and powerful pole saw designed for pruning and cutting branches at height. It features a 56V lithium-ion battery system (battery and charger sold separately) and an extendable aluminum shaft for optimal reach and balance.

Figure 1: Greencut PP560L 56V Cordless Lithium-Ion Pole Saw. This image shows the complete pole saw assembly, including the motor unit, extension pole, and cutting head with chain and bar.
2. Информация по технике безопасности
Всегда уделяйте первостепенное внимание безопасности при работе с электроинструментами. Несоблюдение правил техники безопасности может привести к серьёзным травмам или материальному ущербу.
Общие предупреждения о безопасности:
- Прочитайте руководство: Перед использованием внимательно ознакомьтесь со всеми инструкциями и предупреждениями.
- Используйте средства индивидуальной защиты (СИЗ): Always wear safety glasses, hearing protection, gloves, and sturdy footwear. A hard hat is recommended for overhead work.
- Безопасность рабочей зоны: Обеспечьте отсутствие посторонних лиц, детей и домашних животных на рабочей площадке. Убедитесь в устойчивости и равновесии.
- Избегайте опасных сред: Не используйте длинноствольную пилу во влажных условиях, а также в присутствии легковоспламеняющихся жидкостей или газов.
- Проверьте перед использованием: Проверьте наличие поврежденных деталей, ослабленных крепежных элементов или любых других неисправностей, которые могут повлиять на безопасную эксплуатацию.
- Безопасность аккумулятора: Use only Greencut 56V MAX lithium-ion batteries and chargers. Do not expose batteries to water or extreme temperatures.
- Maintain Proper Grip: Крепко держите пилу на длинной рукоятке обеими руками.
- Воздушные линии электропередачи: Be extremely cautious of overhead power lines. Contact with power lines can be fatal.
- Откат: Be aware of kickback, which can occur when the moving chain contacts an object at the upper tip of the guide bar.
- Хранилище: Храните инструмент в сухом, безопасном и недоступном для детей месте.
3. Компоненты продукта
Familiarize yourself with the various parts of your Greencut PP560L pole saw.
- Блок двигателя: Contains the powerful brushless motor, battery housing, and control switch.
- Эргономичный руль: Semi-circular handle for comfortable grip and control.
- Удлинительный столб: Lightweight aluminum shaft, extendable for increased reach (up to 270cm total length).
- Режущая головка: Includes the guide bar, saw chain, and automatic lubrication system.
- Натяжитель цепи: Tool-free side chain tensioning mechanism.
- Селектор скорости: Switch to adjust cutting speed.

Figure 2: Pole Saw with Extension. This image illustrates the pole saw with its extendable shaft, highlighting the reach capability.

Figure 3: Close-up of the Cutting Head. This image details the guide bar and saw chain, which are essential for cutting.

Figure 4: Ergonomic Handlebar. This image shows the semi-circular handlebar designed for user comfort and control during operation.
4. Настройка и сборка
4.1. Assembly of the Pole Saw
The Greencut PP560L features a modular design for easy assembly and extension.
- Connect the Extension Pole: Align the connection points of the motor unit and the extension pole. Secure them firmly using the provided locking mechanism.
- Прикрепите режущую головку: Connect the cutting head (guide bar and chain assembly) to the end of the extension pole, ensuring it is securely fastened.
- Отрегулируйте руль: Position the ergonomic handlebar to a comfortable and balanced position, then tighten its fasteners.
4.2. Установка батареи (батарея и зарядное устройство продаются отдельно)
The Greencut PP560L requires a Greencut 56V MAX lithium-ion battery (2.0Ah or 4.0Ah), which is not included with the pole saw and must be purchased separately.
- Ensure the pole saw is turned off and the trigger is disengaged.
- Align the battery with the battery housing on the motor unit.
- Вставьте батарею в корпус до щелчка.
- Чтобы извлечь аккумулятор, нажмите кнопку фиксатора и выдвиньте аккумулятор.

Figure 5: Battery Insertion. This image demonstrates the correct method for inserting the 56V lithium-ion battery into the pole saw's motor unit.

Figure 6: Battery Attached. This image shows the battery fully seated and secured in the pole saw's battery housing.
4.3. Смазка цепи
The pole saw features an automatic chain lubrication system. Ensure the oil reservoir is filled with appropriate chain oil before each use. Check the oil level regularly during operation.
4.4. Регулировка натяжения цепи
The PP560L is equipped with a tool-free side chain tensioner. Adjust the chain tension so that the chain is snug against the guide bar but can still be pulled freely by hand. A properly tensioned chain is crucial for safe and efficient cutting.
5. Инструкция по эксплуатации
5.1. Запуск и остановка
- Убедитесь, что батарея полностью заряжена и надежно установлена.
- Hold the pole saw firmly with both hands, maintaining good balance.
- To start, press the safety lock-off button (if present) and then squeeze the trigger switch.
- Чтобы остановить, отпустите курковый выключатель.
5.2. Выбор скорости
The pole saw features a speed selector switch to adjust the cutting speed based on the task. Use lower speeds for delicate cuts or smaller branches, and higher speeds for thicker branches.

Figure 7: Speed Selector Switch. This image shows the switch for adjusting the operational speed of the pole saw, indicated by tortoise and hare symbols.
5.3. Методы резки
- Planning Cuts: Before cutting, assess the branch's direction of fall and clear the area.
- Three-Cut Method: For larger branches, use the three-cut method to prevent bark stripping:
- Make an undercut about one-third of the way through the branch, away from the main trunk.
- Make a top cut further out on the branch, allowing it to fall.
- Make a final clean cut close to the trunk.
- Сохраняйте контроль: Always keep a firm grip and maintain balance. Avoid overreaching.
- Избегайте отдачи: Не режьте кончиком направляющей шины.

Figure 8: Operating the Pole Saw. This image shows a user safely operating the Greencut PP560L to prune high branches, demonstrating proper posture and reach.
6. Техническое обслуживание
Регулярное техническое обслуживание обеспечивает долговечность и безопасную эксплуатацию вашей штанговой пилы.
- Чистить после каждого использования: Remove sawdust, debris, and sap from the guide bar, chain, and motor unit.
- Проверьте натяжение цепи: Regularly inspect and adjust chain tension. A loose chain can derail, and a too-tight chain can cause premature wear.
- Sharpen Chain: A dull chain reduces cutting efficiency and increases kickback risk. Sharpen the chain as needed or have it professionally sharpened.
- Проверьте уровень масла: Ensure the automatic lubrication system reservoir is always filled with appropriate chain oil.
- Осмотр на предмет повреждений: Periodically check for any signs of wear, damage, or loose components. Replace damaged parts immediately.
- Хранилище: Store the pole saw in a dry, secure location, away from moisture and extreme temperatures. Remove the battery before storage.
7. Поиск Неисправностей
В этом разделе вы найдете информацию о распространенных проблемах и способах их решения.
| Проблема | Возможная причина | Решение |
|---|---|---|
| Pole saw does not start. | Battery not charged or not properly installed. Safety lock-off not engaged. | Charge battery fully and ensure it is securely clicked into place. Press safety lock-off before squeezing trigger. |
| Низкая производительность резки. | Dull chain. Incorrect chain tension. Insufficient chain lubrication. | Sharpen or replace chain. Adjust chain tension. Fill oil reservoir and check automatic lubrication. |
| Chain derails frequently. | Ослабленное натяжение цепи. Изношена направляющая шина или цепь. | Отрегулируйте натяжение цепи. Осмотрите направляющую шину и цепь на предмет износа и замените их при необходимости. |
| Двигатель останавливается во время работы. | Overload protection activated. Battery low. | Уменьшите давление резки. Дайте двигателю остыть. Зарядите или замените аккумулятор. |
8. Технические характеристики
| Особенность | Деталь |
|---|---|
| Бренд | Greencut |
| Номер модели | PP560L (Reference: PP56LI-ION) |
| Источник питания | Питание от аккумулятора (литий-ионный аккумулятор 56 В) |
| Батарея в комплекте | No (Battery and charger sold separately) |
| Тип двигателя | Бесщеточный |
| Max Length (with extension) | 270 см |
| Длина направляющей шины | 254 мм (10 дюйма) |
| Максимальная режущая способность | 230 мм |
| Натяжение цепи | Tool-free side tensioner |
| Система смазки | Автоматическая смазка цепи |
| Размеры продукта (Д x Ш x В) | 95.8 х 20.9 х 24.7 см |
| Вес продукта | 700 грамм (без аккумулятора) |
| Цвет | Красный |
| СКП | 08436572521674 |
9. Гарантия и поддержка
Specific warranty details are not provided in the product information. For warranty claims, technical support, or spare parts inquiries, please contact Greencut customer service or refer to the official Greencut webсайт.
Remember that the 56V lithium-ion battery and charger are sold separately and are not included with the Greencut PP560L pole saw.
You can find more information about Greencut products and accessories on their official brand store: Greencut Brand Store.