Tuncmatik Newtech Pro X9 10 KVA

TUNÇMATİK Newtech Pro X9 10 KVA Uninterruptible Power Supply User Manual

Model: Newtech Pro X9 10 KVA

Введение

This manual provides essential information for the safe and efficient operation of your TUNÇMATİK Newtech Pro X9 10 KVA Uninterruptible Power Supply (UPS). Please read this manual thoroughly before installation and operation. Keep this manual in a safe place for future reference.

The Newtech Pro X9 10 KVA is an online UPS designed to provide clean, stable, and reliable power to critical equipment, protecting against power outages, surges, and fluctuations. It features an LCD screen for easy monitoring and control.

Инструкции по технике безопасности

Соблюдайте следующие меры предосторожности, чтобы предотвратить травмы и повреждение ИБП или подключенного к нему оборудования:

  • Не открывайте ИБП casing. Внутри отсутствуют детали, которые пользователь может обслуживать самостоятельно. Обслуживание должно осуществляться квалифицированным персоналом.
  • Убедитесь, что ИБП подключен к заземленной розетке.
  • Do not block ventilation openings. Maintain adequate clearance around the UPS for proper airflow.
  • Избегайте установки ИБП в местах с повышенной запыленностью, влажностью или экстремальными температурами.
  • Перед выполнением любых работ по техническому обслуживанию или очистке отключите ИБП от источника питания.
  • Источник бесперебойного питания (ИБП) содержит внутренние батареи. Не выбрасывайте батареи в огонь, так как они могут взорваться.

Продукт болееview

TUNÇMATİK Newtech Pro X9 10 KVA UPS Front View

Рисунок 1: Передняя часть view of the TUNÇMATİK Newtech Pro X9 10 KVA UPS, showing the LCD display and control panel.

The TUNÇMATİK Newtech Pro X9 10 KVA UPS features a robust design for critical power protection. Key components include:

  • ЖК-дисплей: Provides real-time status, input/output voltage, battery level, and alarm information.
  • Кнопки управления: Для навигации по меню и настройки параметров.
  • Входные/выходные клеммы: For connecting to the main power supply and protected equipment.
  • Вентиляционные решетки: Необходим для рассеивания тепла.

Настраивать

1. Распаковка и осмотр

  1. Carefully unpack the UPS and its accessories.
  2. Осмотрите устройство на наличие каких-либо физических повреждений, которые могли возникнуть во время транспортировки. При обнаружении повреждений немедленно свяжитесь с вашим дилером.
  3. Verify that all standard accessories are present: UPS unit, user manual, and any included cables.

2. Размещение

  • Place the UPS in a clean, dry, and well-ventilated area.
  • Ensure the ambient temperature is between 0°C and 40°C (32°F and 104°F).
  • Избегайте прямых солнечных лучей и источников тепла.
  • Maintain at least 20 cm (8 inches) of clearance around the front, back, and sides of the UPS for proper ventilation.

3. Электрическое подключение

  1. Убедитесь, что главный выключатель питания находится в положении «ВЫКЛ».
  2. Connect the UPS input power cable to a grounded electrical outlet.
  3. Connect your critical equipment to the UPS output terminals. Ensure the total load does not exceed the UPS's rated capacity (10 KVA).
  4. For models with external battery packs (if applicable), connect them according to the separate battery pack manual.

Инструкция по эксплуатации

1. Первоначальный запуск

  1. After connecting all cables, turn on the main power switch.
  2. Press and hold the power button on the front panel for approximately 3 seconds until the UPS powers on.
  3. The LCD display will illuminate and show the startup sequence.
  4. Allow the UPS to perform its self-test. Once complete, it will enter normal operation mode, providing power to connected devices.

2. ЖК-дисплей и панель управления

The LCD display provides critical information about the UPS status. Use the control buttons to navigate through menus and view parameters such as:

  • Объем ввода / выводаtagе и частота
  • Battery Charge Level and Remaining Runtime
  • Процент нагрузкиtage
  • Operating Mode (Online, Battery, Bypass)
  • Alarm and Event Logs

3. Процедура выключения

  1. Ensure all connected equipment is safely shut down.
  2. Press and hold the power button on the front panel for approximately 3 seconds until the UPS powers off.
  3. Disconnect the UPS from the main power supply if it will not be used for an extended period.

Обслуживание

1. Уход за аккумулятором

  • The UPS batteries are designed for a specific lifespan. Regular self-tests help monitor battery health.
  • Avoid frequent deep discharges, which can shorten battery life.
  • If the UPS is stored for an extended period, recharge the batteries every 3-6 months to prevent permanent damage.
  • Battery replacement should only be performed by qualified service personnel.

2. Уборка

  • Ensure the UPS is turned off and disconnected from the power source before cleaning.
  • Для протирки внешней поверхности ИБП используйте мягкую сухую ткань.
  • Do not use liquid cleaners or solvents, as they may damage the casinг или внутренние компоненты.
  • Periodically clean ventilation grilles to ensure unobstructed airflow.

Поиск неисправностей

This section provides solutions to common issues. If the problem persists, contact technical support.

ПроблемаВозможная причинаРешение
ИБП не включается.Отсутствует входное питание; Аккумулятор сильно разряжен; Кнопка питания удерживается недостаточно долго.Check power cord connection and wall outlet; Allow UPS to charge for several hours; Press and hold power button for 3 seconds.
ИБП непрерывно подает звуковой сигнал.Питание от батареи; Перегрузка; Неисправность батареи.Check input power; Reduce connected load; Contact service for battery check.
Connected equipment not receiving power.UPS in bypass mode; Output circuit breaker tripped; UPS fault.Check LCD for operating mode; Reset output circuit breaker; Contact technical support.

Технические характеристики

ОсобенностьОписание
МодельNewtech Pro X9 10 KVA
Емкость10 кВА
ТопологияOnline (Double Conversion)
Входная фаза1-фазный
Фаза выхода1-фазный
Тип батареиSealed Lead-Acid (20 * 12V 9AH)
Runtime (Full Load)5-15 minutes (depending on load)
ОтображатьЖК-экран
Размеры (приблизительные)Refer to product documentation for exact dimensions.
Вес (приблизительный)Refer to product documentation for exact weight.

Гарантия и поддержка

TUNÇMATİK products are backed by a limited warranty. Please refer to the warranty card included with your product or visit the official TUNÇMATİK webсайт для получения подробных условий гарантии.

For technical support, service, or inquiries, please contact your local TUNÇMATİK dealer or authorized service center. When contacting support, please have your product model number (Newtech Pro X9 10 KVA) and serial number ready.

Производитель: TUNÇMATİK

© 2024 TUNÇMATİK. All rights reserved. Information in this manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.