1. Введение
The DMP 716 Output Expansion Module is designed to extend the output capabilities of compatible DMP control panels. It provides additional programmable relays and annunciator outputs, facilitating integration with various external devices and systems. This manual provides essential information for the proper installation, operation, and maintenance of the 716 module.
2. Особенности продукта
- Four programmable Form C (SPDT) relays for versatile control applications.
- Four open collector annunciator outputs for signaling and status indication.
- Designed for seamless integration with all LX-Bus circuits, ensuring reliable communication.
- Compact and durable design suitable for various installation environments.
3. Настройка и установка
Before beginning installation, ensure all power to the control panel and associated devices is disconnected. Refer to the control panel's installation guide for specific wiring diagrams and power requirements.
3.1 Монтаж
The 716 module should be mounted securely within the control panel enclosure or a suitable auxiliary enclosure. Use the provided mounting holes to fasten the module to a flat surface, ensuring adequate ventilation.
3.2 Подключение
Connect the 716 module to the control panel's LX-Bus terminals. Observe proper polarity for power connections. Connect external devices to the Form C relays and open collector annunciator outputs as required by your system design. Ensure all connections are secure and insulated.
This image displays the DMP 716 Output Expansion Module. The main component is a green circuit board populated with various electronic components, including relays and integrated circuits, mounted within a white plastic housing. To the right, the module's white plastic cover is shown detached, indicating the internal view устройства.
3.3 Конфигурация
After physical installation, configure the 716 module's outputs through the control panel's programming interface. Refer to your control panel's programming manual for detailed instructions on assigning functions to the relays and annunciator outputs.
4. Эксплуатация модуля
The DMP 716 module operates under the control of the connected DMP control panel. Its relays and annunciator outputs will activate or deactivate based on the programming and events within the security or automation system.
- Релейные выходы: The four Form C (SPDT) relays can be programmed to switch external circuits (e.g., lights, sirens, door locks) based on system events like alarms, arming status, or specific zone conditions.
- Annunciator Outputs: The four open collector outputs provide low-current signaling for devices such as LEDs or small buzzers, indicating system status or specific event occurrences.
Always ensure that the connected devices' power requirements do not exceed the module's output specifications.
5. Техническое обслуживание
The DMP 716 module is designed for reliable, long-term operation with minimal maintenance. Regular inspection is recommended to ensure optimal performance.
- Визуальный осмотр: Периодически осматривайте модуль на наличие признаков механических повреждений, ослабленных соединений или коррозии.
- Уборка: При необходимости аккуратно протрите внешнюю поверхность модуля мягкой сухой тканью. Не используйте жидкие чистящие средства или растворители.
- Обновления прошивки: Consult DMP technical support or your installer for information regarding any available firmware updates for your control panel that may affect module operation.
6. Поиск Неисправностей
If you experience issues with the DMP 716 module, consider the following troubleshooting steps:
- Модуль не отвечает:
- Verify that the LX-Bus connections are secure and correctly polarized.
- Check the control panel's power supply.
- Ensure the module is properly addressed or recognized by the control panel in its programming.
- Выходные данные не активируются:
- Confirm the output is correctly programmed in the control panel for the desired event.
- Check the wiring to the external device connected to the output.
- Verify the external device is functioning correctly and its power requirements are met.
- Ensure the load connected to the relay does not exceed its maximum current rating.
- Прерывистая работа:
- Проверьте всю проводку на наличие ослабленных соединений или поврежденной изоляции.
- Check for potential electrical interference from nearby equipment.
If problems persist after attempting these steps, contact your installer or DMP technical support.
7. Технические характеристики
| Атрибут | Ценить |
|---|---|
| Производитель | ДМП |
| Номер модели продукта | 716 |
| Размеры (Д x Ш x В) | 20.32 х 15.24 х 5.08 см |
| Масса | 453.59 г |
| Выходы реле | 4 x Form C (SPDT) programmable |
| Выходы сигнализатора | 4 x Open Collector |
| Совместимость с шиной | LX-автобус |
8. Гарантия и поддержка
For warranty information regarding your DMP 716 Output Expansion Module, please refer to the documentation provided at the time of purchase or contact your authorized DMP dealer. DMP products are typically covered by a limited warranty against defects in materials and workmanship.
For technical support, installation assistance, or advanced troubleshooting, please contact your security system installer or visit the official DMP webсайт для получения ресурсов поддержки и контактной информации.