iFlight 43234-1976

iFlight 2.4G Receiver Antenna (150mm, IPEX 4) Instruction Manual

Модель: 43234-1976

Введение

This manual provides essential information for the proper installation, operation, and maintenance of your iFlight 2.4G Receiver Antenna. This antenna is designed for use with compatible FrSky receivers and remote controllers, featuring a 150mm length and an IPEX 4 connector.

Внимательно ознакомьтесь с данной инструкцией перед использованием, чтобы обеспечить оптимальную работу и долговечность изделия.

Характеристики продукта

  • Тип разъема: 2.4G receiver antenna with IPEX 4 Generation connector.
  • Длина: 5.9 inches (150mm) total length.
  • Материал: RF113 Silver plated Wire Material for enhanced signal transmission.
  • Производительность: Precision machining ensures low loss signal stability and high sensitivity.
  • Совместимость: Specifically designed for FrSky XM+, X4R, and X4R-SB receivers, including mini versions.

Содержимое упаковки

The package contains 20 pieces of iFlight 150mm 2.4G Receiver Antennas.

A bundle of iFlight 2.4G receiver antennas with IPEX 4 connectors.

Image: A bundle of iFlight 2.4G receiver antennas, showcasing the IPEX 4 connectors and the overall design.

Настройка и установка

  1. Определите тип соединителя: Ensure your receiver uses an IPEX 4 port. This antenna is designed for the smaller IPEX 4 connector. Refer to the comparison image below.
  2. Comparison image showing the 'new version IPEX4' connector next to a 'regular version IPEX (bigger port)'.

    Image: A side-by-side comparison of the new IPEX 4 connector (smaller) and a regular IPEX connector (larger port), highlighting the difference.

  3. Подключиться к приемнику: Carefully align the IPEX 4 connector of the antenna with the corresponding port on your FrSky receiver. Apply gentle, even pressure until you feel a distinct "snap," indicating a secure connection.
  4. Размещение антенны: For optimal signal reception, position the antenna away from carbon fiber frames, metal objects, and other electronic components that may cause interference. Ensure the active element (the exposed wire tip) is not obstructed.
  5. Защищенная антенна: Use heat shrink tubing, zip ties, or appropriate mounting solutions to secure the antenna in place, preventing it from moving during flight or operation. Avoid sharp bends or kinks in the antenna wire.
A FrSky receiver with an iFlight 2.4G receiver antenna connected.

Image: A FrSky receiver with an iFlight 2.4G receiver antenna properly connected. Note: The receiver is for reference only and not included with the antenna pack.

Инструкция по эксплуатации

Once the antenna is securely connected and properly positioned, the receiver will utilize it for 2.4G signal reception from your remote controller. No specific operational steps are required for the antenna itself beyond proper installation.

Always perform a range check before operating your RC model to ensure reliable signal strength and control. Consult your receiver's manual for specific binding and range testing procedures.

Обслуживание

  • Регулярный осмотр: Periodically inspect the antenna wire and connector for any signs of damage, fraying, or corrosion.
  • Чистота: Keep the antenna free from dirt, dust, and moisture. Use a soft, dry cloth for cleaning if necessary.
  • Хранилище: When not in use, store the antennas in a dry, cool place, protected from physical damage.
  • Замена: If the antenna wire is cut, bent severely, or the connector is damaged, replace it immediately with a new iFlight 2.4G Receiver Antenna to maintain signal integrity.

Поиск неисправностей

Problem: Poor Signal / Frequent Failsafes
  • Проверьте подключение: Ensure the antenna is securely connected to the receiver's IPEX 4 port. A loose connection can severely degrade signal quality.
  • Размещение антенны: Verify that the antenna is positioned optimally, away from obstructions and interference sources. Ensure the active element is exposed.
  • Antenna Damage: Inspect the antenna for any physical damage. Even minor cuts or kinks can affect performance. Replace if damaged.
  • Проблемы с приемником: If multiple antennas show similar issues, the problem might lie with the receiver itself or the remote controller. Consult their respective manuals.
Problem: Antenna Does Not Fit
  • Проверьте тип соединителя: This antenna uses an IPEX 4 (smaller) connector. If your receiver requires a larger IPEX (U.FL) connector, this antenna will not be compatible. Double-check your receiver's specifications.

Технические характеристики

Параметр Ценить
Номер модели 43234-1976
Тип антенны 2.4G Receiver Antenna
Тип разъема IPEX 4 Generation
Длина 150 мм (5.9 дюймов)
Материал провода RF113 Silver plated
Сопротивление 50 Ом
Диапазон частот 2400 - 2500 МГц
SWR <= 2.0
Прирост 2
Рабочая температура -40 °С до +65 °С
Температура хранения -40 °С до +80 °С
Item Weight (per antenna) Approximately 0.5g (as shown in product images)
An iFlight 2.4G receiver antenna laid out next to a ruler, indicating its 150mm length.

Image: The 150mm length of the antenna measured against a ruler.

An iFlight 2.4G receiver antenna coiled on a digital scale, showing a weight of 0.5g.

Image: A single antenna on a digital scale, displaying a weight of 0.5 grams.

Официальное видео о продукте

Video: This official video demonstrates the 2.4G Receiver Antenna, highlighting its features and compatibility with Futaba and FrSky systems. (Duration: 0:24)

Гарантия и поддержка

For warranty information and technical support, please refer to the official iFlight webПосетите их сайт или свяжитесь напрямую со службой поддержки клиентов. Конкретные условия гарантии могут различаться в зависимости от региона и продавца.

© 2026 iFlight. All rights reserved.

Связанные документы - 43234-1976

Предварительноview iFlight Nazgul Evoque F7 FPV Drone Quick Start Guide
Get started with your iFlight Nazgul Evoque F7 FPV drone. This guide covers essential setup, binding, flight operations, safety precautions, and troubleshooting for a safe and enjoyable flying experience.
Предварительноview iFlight BLITZ 1.6W VTX: руководство по настройке и эксплуатации
Подробные инструкции для iFlight BLITZ 1.6W VTX, охватывающие технические характеристики, описание портов, схемы подключения, функции кнопок и диапазоны частот для оптимальной настройки системы FPV.
Предварительноview iFlight BumbleBee HD BNF Setup Guide
A comprehensive setup and configuration guide for the iFlight BumbleBee HD BNF FPV drone, covering activation, binding, Betaflight settings, and ESC tuning.
Предварительноview iFlight Commando 14 RC Transmitter User Manual
User manual for the iFlight Commando 14 RC transmitter, covering setup, ExpressLRS configuration, binding, firmware updates, and troubleshooting.
Предварительноview Схема подключения и технические характеристики приемника iFlight Borg 5S RX FC
Подробная схема подключения и технические характеристики полетного контроллера iFlight Borg 5S RX FC, включая информацию о приемнике, управлении видеопередатчиком и информацию о совместимости для производителей дронов.
Предварительноview iFlight BLITZ WHOOP 1.6W VTX: Руководство по установке и эксплуатации
Подробные инструкции для видеопередатчика iFlight BLITZ WHOOP 1.6W, охватывающие технические характеристики, подключение портов, функции кнопок, схемы электропроводки, таблицу частот и важные моменты для систем FPV дронов.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.