Leviton GFSW1-W

Leviton GFSW1-W Smartlockpro GFCI Receptacle & Switch Instruction Manual

Model: GFSW1-W

1. Введение

This manual provides essential information for the safe installation, operation, and maintenance of your Leviton GFSW1-W Smartlockpro Tamper-Resistant Combo GFCI Receptacle & Switch. This device combines a ground fault circuit interrupter (GFCI) receptacle with a standard switch, offering enhanced electrical safety and convenience in a single unit. Please read these instructions thoroughly before beginning installation or use.

2. Информация по технике безопасности

WARNING: RISK OF ELECTRIC SHOCK OR FIRE. IMPROPER INSTALLATION OR USE MAY RESULT IN SERIOUS INJURY OR DEATH.

  • Перед установкой или обслуживанием данного устройства всегда отключайте питание на автоматическом выключателе или в распределительном щите.
  • Монтаж должен выполняться квалифицированным электриком в соответствии со всеми национальными и местными электротехническими нормами.
  • Do not use this device with aluminum wiring. Use only with copper or copper-clad wire.
  • Убедитесь, что все соединения проводов надежны и надлежащим образом изолированы.
  • This device is designed for indoor use in dry locations unless otherwise specified.

3. Особенности продукта

  • Функция самопроверки: Provides continuous ground fault protection by automatically testing the GFCI. It detects and trips on actual ground faults even during self-testing.
  • Первоначальная проверка включения питания: Tests the GFCI within 3 seconds of initial power-up.
  • Auto-Monitoring: Exceeds UL requirements by adapting and shifting to more frequent testing if a potential problem is detected.
  • Protection Status Indicator: An LED light provides simple, intuitive feedback on power and protection status, including indication of line/load reversal.
  • Patented Bridge Contact: Ensures no power is delivered to the receptacle face if improperly wired (line-load reversed).
  • Enhanced Immunity: Improved immunity to high-frequency noise reduces nuisance tripping.
  • Surge Resistance: Advanced electronics provide superior resistance to electrical surges and over-voltagес.
  • Lockout Action: Patented lockout action prevents reset if the GFCI is damaged and cannot respond to a ground fault.
  • TampЭр-устойчивая розетка: Designed to prevent insertion of foreign objects into the receptacle openings.
  • Прочная конструкция: Features an impact-resistant thermoplastic cover and polycarbonate body.

4. Технические характеристики

АтрибутЦенить
МодельGFSW1-W
Томtage125 Вольт
Amperage (Receptacle)15 Amps
Переключить рейтинг15 Amp - 120 VAC
Конфигурация NEMA5-15Р
ЦветБелый
МатериалThermoplastic face, Polycarbonate body
Размеры изделия (Д x Ш)1.7 дюйма (Д) x 1.13 дюйма (Ш)
Рабочая температура-35°С до 66°С
Agency StandardsUL Standard 943 Class A (GFCI), UL 498 (Receptacles), CSA Certified, NOM Certified

5. Установка (настройка)

ВАЖНЫЙ: Turn OFF power at the circuit breaker or fuse box before wiring. Failure to do so may result in serious injury or death.

  1. Подготовьте проводку: Carefully remove the existing device from the wall box. Identify the LINE (incoming power) and LOAD (downstream protection) wires. If you are unsure, consult a qualified electrician.
  2. Подключите провода:
    • Connect the LINE hot wire to the brass LINE terminal.
    • Connect the LINE neutral wire to the silver LINE terminal.
    • If protecting downstream receptacles, connect the LOAD hot wire to the brass LOAD terminal.
    • If protecting downstream receptacles, connect the LOAD neutral wire to the silver LOAD terminal.
    • Connect the ground wire to the green ground screw.
    • Убедитесь, что все соединения герметичны и надежны.
  3. Смонтируйте устройство: Carefully fold the wires into the wall box. Mount the GFCI receptacle and switch into the wall box using the provided screws.
  4. Установите настенную панель: Attach the wallplate (not included) over the device.
  5. Восстановить мощность: Turn ON power at the circuit breaker or fuse box.
  6. Проверьте GFCI: Perform the initial test as described in the "Operation" section to ensure proper functioning.
Leviton GFSW1-W Smartlockpro GFCI Receptacle and Switch installed in a white tiled wall.

Image: The Leviton GFSW1-W Smartlockpro GFCI Receptacle and Switch, white in color, shown installed on a white tiled wall. It features a rocker switch at the top, and below it, a GFCI receptacle with "RESET" and "TEST" buttons, and a small LED indicator light.

6. Операция

The Leviton GFSW1-W combines a standard light switch with a GFCI-protected receptacle.

  • Функция переключателя: The top rocker switch operates connected lighting or other loads. Press the top to turn ON, press the bottom to turn OFF.
  • GFCI Receptacle: The lower portion provides a 15 Amp, 125 Volt tamper-resistant outlet with ground fault protection.
  • Testing the GFCI:
    1. Подключи альamp or other device into the GFCI receptacle and turn it ON.
    2. Press the "TEST" button. The GFCI should trip, and the lamp/device should turn OFF. The LED indicator may change color or turn off.
    3. Press the "RESET" button. The GFCI should reset, and the lamp/device should turn ON. The LED indicator should return to its normal operating state (e.g., green).
    4. If the GFCI does not trip or reset as described, it may be improperly wired or defective. Do not use and consult a qualified electrician.
  • Сброс GFCI: If the GFCI trips (power is interrupted), press the "RESET" button firmly. If it does not reset, check for a ground fault or consult the troubleshooting section.

7. Техническое обслуживание

Regular testing of your GFCI device is crucial to ensure continued protection against ground faults. Leviton recommends testing your GFCI monthly.

  • Follow the "Testing the GFCI" procedure outlined in the Operation section at least once a month.
  • If the GFCI fails to trip or reset during testing, it must be replaced immediately.
  • Keep the device and wallplate clean. Use a soft, damp Для чистки используйте ткань; избегайте абразивных чистящих средств или растворителей.

8. Поиск Неисправностей

ПроблемаВозможная причинаРешение
GFCI will not reset.
  • No power to the GFCI.
  • GFCI is improperly wired (LINE/LOAD reversed).
  • A ground fault exists in the circuit or connected appliance.
  • GFCI is defective.
  • Проверить автоматический выключатель.
  • Проверьте соединения проводов.
  • Unplug all appliances and try to reset. If it resets, plug in appliances one by one to identify the faulty one.
  • Replace the GFCI.
Устройство защитного отключения (УЗО) срабатывает часто.
  • A persistent ground fault.
  • Перегрузка цепи.
  • Moisture or damage to connected appliances/cords.
  • Inspect wiring and appliances for faults.
  • Уменьшите количество устройств в цепи.
  • Inspect and replace damaged items.
Выключатель не работает.
  • Нет питания на устройстве.
  • Incorrect wiring of the switch.
  • Неисправный переключатель.
  • Проверить автоматический выключатель.
  • Verify switch wiring.
  • Замените устройство.

9. Гарантия и поддержка

Limited Two-Year Product Warranty: Leviton warrants this product to be free from defects in material and workmanship under normal use and service for a period of two years from the date of original purchase. For complete warranty details, please refer to the documentation included with your product or visit the official Leviton webсайт.

Служба поддержки клиентов: If you require assistance with installation, troubleshooting, or have questions about your Leviton GFSW1-W device, please contact Leviton Customer Service. Contact information can typically be found on the product packaging or the official Leviton webсайт (www.leviton.com).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.