AIBOO Linkable Under Cabinet LED Lighting System User Manual

1. Введение

This manual provides comprehensive instructions for the installation, operation, and maintenance of your AIBOO Linkable Under Cabinet LED Lighting System. This system features hardwired 12V slim aluminum dimmable puck lights with a wireless controller, designed for ambiance lighting in various indoor settings. Please read this manual thoroughly before installation and use.

2 Важная информация по безопасности

• Электробезопасность: This product is designed for 110V/120Vac input and requires hardwiring. Installation should be performed by a qualified electrician or an individual with intermediate knowledge of electrical wiring to prevent electric shock or fire hazards. Ensure power is disconnected at the circuit breaker before any installation or maintenance.
• No Wall Plug: This system does NOT include a wall plug power adapter. It is intended for direct wiring into your electrical system.
• Только для использования в помещении: This lighting system is designed for indoor use in dry locations. Do not expose to moisture or water.
• Вентиляция: Ensure adequate ventilation around the LED driver to prevent overheating.
• Совместимость компонентов: Use only the components provided or specified by AIBOO. Using incompatible parts may damage the system or pose a safety risk.

3. Содержимое упаковки

Убедитесь, что все перечисленные ниже предметы включены в ваш пакет:

• LED Puck Lights (6 units)
• RF Wireless Remote Control (1 unit)
• LED Controller (1 unit)
• 12V 1A Hardwired LED Driver (Power Adapter) (1 unit)
• 5ft Extension Cords (2 units)
• 6-Way Splitter (1 unit)
• Mounting Stickers (12 units)
• Крепежные винты (12 шт.)

4. Технические характеристики продукта

5. Настройка и установка

Перед началом монтажа убедитесь, что основное электропитание в месте установки отключено с помощью автоматического выключателя.

5.1 Схема электропроводкиview

5.2 Hardwired Power Adapter Connection

The system includes a hardwired power adapter (LED Driver) designed to connect directly to a 110V/120Vac circuit. This adapter converts AC power to 12V DC for the LED lights. A wall plug is not included.

1. Отключите электропитание с помощью главного автоматического выключателя.
2. Connect the input wires of the LED driver to your 110V/120Vac circuit wiring. Ensure proper polarity (live to live, neutral to neutral, ground to ground) according to local electrical codes.
3. Надежно закрепите все соединения с помощью соответствующих соединителей проводов.

5.3 Connecting the Puck Lights

The puck lights can be connected in two primary configurations: Series Connection or Parallel Connection.

5.3.1 Последовательное соединение

In a series connection, the puck lights are linked one after another. This method is suitable for linear installations where lights are spaced evenly in a line.

1. Connect the LED controller to the output of the hardwired LED driver.
2. Connect the first puck light to the LED controller.
3. Connect the subsequent puck lights to each other using their integrated cables.
4. Use extension cords if additional length is required between lights.

5.3.2 Параллельное соединение

For installations requiring lights to branch out from a central point, the 6-way splitter allows for parallel connection.

1. Connect the LED controller to the output of the hardwired LED driver.
2. Connect the 6-way splitter to the LED controller.
3. Connect individual puck lights to the available ports on the 6-way splitter.
4. Use extension cords if additional length is required for individual lights.

5.4 Mounting the Puck Lights

The puck lights can be mounted using either the provided screws or adhesive stickers.

1. Подготовка поверхности: Убедитесь, что монтажная поверхность чистая, сухая и гладкая.
2. Крепление на клей: Peel the backing from the adhesive sticker and firmly press the puck light onto the desired surface. Hold for 30 seconds to ensure a strong bond.
3. Винтовое крепление: Use the provided screws to secure the puck lights to the surface. Pre-drilling pilot holes may be necessary depending on the material.

6. Инструкция по эксплуатации

The AIBOO LED Lighting System is controlled by an RF wireless remote control.

6.1 Функции дистанционного управления

• ВКЛ/ВЫКЛ: Нажмите ON кнопка для включения света и ВЫКЛЮЧЕННЫЙ кнопка для их выключения.
• Регулировка яркости:
  • Нажимать LIGHT + or LIGHT - to gradually increase or decrease brightness (stepless dimming).
  • Используйте 100%, 50%, 25% buttons for quick brightness presets.
• Сочетание: To pair the remote with the controller, press the Пара button within 5 seconds of powering on the lights until the lights flicker.
• Decoding (1 to More Pair): To pair one remote with multiple controllers, press the Расшифровать button within 5 seconds of powering on the lights until the lights flicker.
• Функции синхронизации: Нажимать 1H, 2H, 4H, или 8H to set the lights to automatically turn off after 1, 2, 4, or 8 hours, respectively.

7. Техническое обслуживание

The AIBOO LED Lighting System requires minimal maintenance.

• Уборка: Ensure the lights are off and cool before cleaning. Wipe the puck lights and controller with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Инспекция: Periodically check all connections for tightness and inspect cables for any signs of damage.
• Замена батареи: The remote control requires 1 CR2 battery. Replace the battery when the remote's range decreases or it stops responding.

8. Поиск Неисправностей

If you encounter issues with your AIBOO LED Lighting System, refer to the following common problems and solutions:

9. Информация о гарантии

AIBOO products are manufactured to high-quality standards. For specific warranty details regarding your Linkable Under Cabinet LED Lighting System, please refer to the warranty card included with your purchase or visit the official AIBOO webСохраните чек о покупке в качестве подтверждения покупки на случай предъявления гарантийных претензий.

10. Поддержка клиентов

For technical assistance, troubleshooting, or product inquiries, please contact AIBOO customer support.

• U.S. Live Customer Support: Monday - Friday, 9 AM - 5 PM (EST)
• Интернет-ресурсы: Посетите AIBOO Store on Amazon для получения дополнительной информации о продукте и поддержки.