Xfinity XR2

Руководство пользователя пульта дистанционного управления Xfinity XR2 HDTV DVR

Model: XR2 (4330948498)

1. Введение

The Xfinity XR2 Remote Control is designed to provide seamless control over your Xfinity HD and HD-Digital Receivers, as well as your television and audio devices. This manual will guide you through the process of setting up, operating, and maintaining your remote control.

Two Xfinity XR2 remote controls, black with grey buttons, shown side-by-side.

Image: Two Xfinity XR2 remote controls, highlighting their design and button layout.

2. Настройка

2.1. Установка аккумулятора

Your XR2 remote requires four (4) AA batteries. To install:

  1. Найдите крышку батарейного отсека на задней панели пульта дистанционного управления.
  2. Сдвиньте крышку вниз и снимите её.
  3. Insert the four AA batteries, ensuring the positive (+) and negative (-) terminals align with the indicators inside the compartment.
  4. Установите крышку батарейного отсека на место, сдвинув ее на место до щелчка.

2.2. Initial Programming and Pairing

The XR2 remote can operate in either Infrared (IR) or Radio Frequency (RF) mode. For older Cisco HD DVRs or similar models, you may need to configure it for IR output.

2.2.1. Configuring for IR Mode (if needed)

  1. Нажмите и удерживайте Настраивать button (located at the very bottom left of the remote) until the red LED light at the top of the remote turns green.
  2. Нажмите A key (located above the numeric keys). The green light will flash three times, indicating the remote is now configured for IR output.
  3. The remote should now be ready for use with your DVR.

2.2.2. Programming for TV and Audio Devices

To control your television or audio receiver, you will need to program the remote using specific 5-digit codes provided in the accompanying pamphlet or available from Xfinity support. Follow the instructions provided with your remote for TV code entry.

3. Инструкция по эксплуатации

The XR2 remote features a variety of buttons for controlling your Xfinity DVR and connected devices. Familiarize yourself with the layout and functions below:

  • Power (All Power): Turns on/off your TV and DVR simultaneously.
  • ТВ-вход: Cycles through video inputs on your television.
  • ГРОМКОСТЬ +/-: Adjusts the volume of your television or audio receiver.
  • Немой: Отключает или включает звук.
  • СН +/-: Changes channels on your DVR.
  • Search (Q): Accesses the search function.
  • Transport Controls (Play, Pause, Rewind, Fast Forward, Stop, Record): Controls playback of live TV and recorded content.
  • Xfinity/Menu: Accesses the Xfinity menu.
  • Гид: Отображает программу передач.
  • ОК/Выбрать: Подтверждает выбор и открывает меню.
  • Стрелки навигации: Moves through menus and guide listings.
  • Pg Up/Down: Пролистывает страницы в путеводителе или меню.
  • Последний: Возвращает к предыдущему viewed канал.
  • Информация: Отображает информацию о текущей программе.
  • Выход: Exits menus or guides.
  • Избранное: Доступ к списку любимых каналов.
  • Кнопки A, B, C, D: Context-sensitive buttons for various functions within menus.
  • Цифровая клавиатура (0-9): Непосредственно вводит номера каналов.
  • Настраивать: Используется для программирования пульта дистанционного управления.
  • Космос: Used for text entry.
  • Менять: Swaps between two tuners on compatible DVRs.

4. Техническое обслуживание

To ensure the longevity and optimal performance of your XR2 remote control, follow these maintenance guidelines:

  • Уборка: Для протирки пульта используйте мягкую сухую ткань. Для удаления стойких загрязнений слегка протрите пульт сухой тканью.ampСмочите ткань водой или мягким неабразивным чистящим средством. Избегайте чрезмерного увлажнения.
  • Замена батареи: Replace batteries when the remote's response becomes sluggish or the LED indicator does not light up consistently. Always replace all four batteries at the same time with new AA alkaline batteries.
  • Хранилище: Храните пульт дистанционного управления в прохладном, сухом месте, вдали от прямых солнечных лучей и экстремальных температур.
  • Избегайте капель: Берегите пульт дистанционного управления от механических ударов, так как падения могут повредить внутренние компоненты.

5. Поиск Неисправностей

If you encounter issues with your XR2 remote, try the following solutions:

  • Удаленно не отвечает:
    • Проверьте, правильно ли вставлены батарейки и достаточно ли они заряжены. При необходимости замените их.
    • Ensure there is a clear line of sight between the remote and your DVR/TV if operating in IR mode.
  • Remote Not Controlling TV/Audio:
    • Re-attempt the TV/audio programming steps using the correct 5-digit code for your device.
    • Verify that the remote is configured for the correct mode (IR or RF) as described in Section 2.2.1.
  • Remote Needs Reset:
    • If the remote is behaving erratically, you can perform a factory reset. Press and hold the Настраивать button until the LED turns green, then enter 9-8-1. The LED will flash, indicating a successful reset. You will then need to re-program the remote.
  • Кнопки не работают:
    • Убедитесь, что под кнопками не скопился мусор.
    • If only specific buttons are not working, the remote may be faulty and require replacement.

6. Технические характеристики

ОсобенностьДеталь
Номер моделиXR2 (4330948498)
Размеры продукта7.99 x 5.98 x 2.01 дюйма
Вес товара13.6 унции
Требуются батареи4 батарейки АА
Технология связиИнфракрасный (ИК)
Совместимые устройстваHDTV, DVR, Television
Максимальное количество поддерживаемых устройств1 (DVR/TV combination)
Специальная характеристикаЭргономичный дизайн
ПроизводительXfinity

7. Гарантия и поддержка

For warranty information or technical support, please refer to the documentation provided with your Xfinity service or visit the official Xfinity support website. You may also contact Xfinity customer service directly for assistance with your XR2 remote control.