KERUI W18 WiFi GSM Alarm System User Manual

1. Введение

The KERUI W18 is a comprehensive home intrusion alarm system designed to provide security through both WiFi and GSM connectivity. This system features a user-friendly TFT color screen, voice prompts, and supports up to 99 wireless zones. It allows for remote control via a smartphone application and sends alerts through calls, SMS, and app push notifications. This manual provides detailed instructions for setting up, operating, and maintaining your KERUI W18 alarm system.

2. Содержимое упаковки

Пожалуйста, проверьте наличие всех предметов в вашей посылке:

• 1 x KERUI W18 Alarm Panel / Control Unit (SIM card not included)
• 2 x Wireless Door/Window Sensors (each requires 1 x 23A 12V battery)
• 1 x Wireless PIR Motion Detector (requires 3 x AAA batteries)
• 2 пульта дистанционного управления
• 1 x проводная сирена
• 1 x EU Power Adapter for Alarm Panel
• 1 х Руководство пользователя на английском языке

3. Продукт закончилсяview

3.1. Alarm Panel Components

Familiarize yourself with the main components of your KERUI W18 alarm panel:

This image displays the KERUI W18 alarm panel, highlighting its key components. On the front, you can see the TFT color screen, the numeric keypad (1-9, *, 0, #), and function buttons like 'OK. Enter', 'ESC. Return', 'Arm/Home Arm', 'Disarm', 'Return', and 'Enter'. The side view shows the ON/OFF switch, power port (DC 5V), wired siren jack, SIM card slot, and a microphone (MIC). A tamper switch is located on the back.

• Цветной TFT-экран: Displays system status, menus, and settings.
• Клавиатура: Для ввода кодов и навигации по меню.
• Функциональные кнопки:
  • OK. Enter: Подтверждает выбор.
  • ESC. Return: Возврат в предыдущее меню.
  • Arm/Home Arm: Активирует систему сигнализации.
  • Снять с охраны: Отключает систему охранной сигнализации.
  • Возвращаться: Осуществляет переход назад.
  • Входить: Подтверждает ввод.
• Переключатель ВКЛ / ВЫКЛ: Включает и выключает устройство.
• Разъем питания (5 В постоянного тока): Подключается к адаптеру питания.
• Wired Siren Jack: Connects the included wired siren.
• Слот для SIM-карты: For inserting a 2G GSM SIM card.
• МИКРОФОНД: Microphone for two-way intercom functionality.
• Tamper Switch (on back): Срабатывает сигнализация, если панель снимается с крепления.

4. Настройка

4.1. Powering the Alarm Panel

1. Connect the provided EU power adapter to the DC 5V power port on the side of the alarm panel.
2. Подключите адаптер к стандартной розетке.
3. Flip the ON/OFF switch to the "ON" position. The panel will power on.

4.2. Установка SIM-карты (необязательно)

For GSM functionality (calls and SMS alerts), a standard 2G GSM SIM card is required. Ensure the SIM card's PIN code is disabled before insertion.

1. Locate the SIM card slot on the side of the alarm panel.
2. Carefully insert a standard 2G GSM SIM card into the slot until it clicks into place.
3. The system supports GSM850/900/1800/1900MHz frequencies.

This image illustrates the dual functionality of the KERUI W18 system, supporting both 2G GSM (GSM850/900/1800/1900MHz) and 2.4 GHz WiFi connectivity. It shows the integrated battery for 8 hours of standby, the requirement for a standard 2G GSM SIM card, and exclusive support for 2.4 GHz WiFi networks.

4.3. Установка батареи датчика

Install batteries into the wireless sensors:

• Датчики дверей/окнов: Each sensor requires one 23A 12V battery. Slide open the back cover, remove any protective cardboard, insert the battery, and close the cover.
• ИК-детектор движения: Requires three AAA batteries. Open the battery compartment, insert the batteries with correct polarity, and close the compartment.

4.4. Установка приложения и подключение к Wi-Fi

The KERUI W18 system connects to your smartphone via the "Tuya Smart" application. The system only supports 2.4 GHz WiFi networks (not compatible with 5 GHz WiFi).

1. Загрузите приложение: Искать "Tuya Smart" in the Apple App Store or Google Play Store, or scan the QR codes provided in the image below to download and install the application on your smartphone.
   Приложение Tuya Smart (iOS)
2. Connect Phone to 2.4 GHz WiFi: Ensure your smartphone is connected to a 2.4 GHz WiFi network (802.11b/g/n).
3. Panel WiFi Configuration: On the alarm panel, navigate to the configuration menu, select [Paramètre WIFI] (WiFi Settings), then press the button for [1. WiFi Config].
4. Подключиться через приложение: In the "Tuya Smart" application, select your WiFi network and enter its password. The alarm panel will then connect to your smartphone via WiFi.

This image provides a step-by-step guide for connecting the W18 alarm system to a 2.4 GHz WiFi network. It instructs users to download the 'Tuya Smart' app (available on App Store/Google Play via QR codes), connect their phone to 2.4 GHz WiFi, access 'WiFi Config' in the panel's settings, and enter the WiFi password in the app.

4.5. Сопряжение датчиков (если они не были предварительно сопряжены)

The included sensors and remote controls are typically pre-paired with the main panel. If you add new sensors or need to re-pair existing ones, refer to the panel's menu for adding wireless accessories. Each sensor is assigned to a specific zone.

5. Инструкция по эксплуатации

5.1. Постановка и снятие системы с охраны

The system can be armed or disarmed using the alarm panel, remote controls, or the "Tuya Smart" application.

• Постановка на охрану (режим «Вне дома»): Активирует все датчики. Использовать при выходе из помещения.
• Режим домашней охраны (режим ожидания): Activates perimeter sensors (e.g., door/window sensors) while allowing free movement within the property (e.g., PIR sensors in "HOME" zone attribute can be bypassed).
• Снять с охраны: Отключает систему охранной сигнализации.

5.2. Zone Types

The system supports 99 wireless zones and 8 types of defense zones, which can be independently defined and named via the app:

• Нормальный: Standard zone, triggers alarm immediately.
• Stay (Séjour): Typically used for Home Arm mode, sensors in this zone are bypassed.
• Разумный: May have a delay or require multiple triggers.
• Чрезвычайная ситуация: Triggers immediate alarm (e.g., panic button).
• Закрывать: Specific use case, often for normally closed circuits.
• дверной: Triggers a doorbell chime instead of an alarm.
• Добро пожаловать: Triggers a welcome chime.
• Помощь: Triggers a silent or audible alarm for assistance.

Each zone can have its siren ON/OFF status configured.

5.3. Планирование постановки/снятия с охраны

You can program up to 4 sets of timed arming and disarming schedules to automate your security routine.

This image shows the scheduling feature of the KERUI W18 system, allowing users to program up to 4 sets of timed arming and disarming schedules. Examples include arming at 08:00 when leaving for work, disarming at 19:10 after work, arming at 22:15 for bedtime, and disarming at 06:00 upon waking.

5.4. Receiving Alerts and Two-Way Intercom

При срабатывании тревоги система уведомит вас по нескольким каналам:

• SMS-оповещения: Sends text messages to up to 6 pre-defined numbers, indicating the alarm zone.
• Телефонные звонки: Dials up to 6 pre-defined numbers. The system includes a 10-second automatic message recording with artificial voice, allowing you to identify the alarm location and zone when you receive the call.
• Push-уведомления приложения: Sends instant alerts to your smartphone via the "Tuya Smart" app.

The system also supports a two-way intercom feature, allowing you to communicate remotely through the alarm panel after receiving an alarm call.

This image demonstrates how the KERUI W18 system provides precise alarm notifications. When a detector is triggered, the host unit activates the alarm and informs you via SMS, phone call, and mobile application push notifications. This ensures you receive immediate alerts regardless of your location.

5.5. Журнал событий

The alarm panel can display the latest 72 arm/disarm records and 102 alarm records, allowing you to review system activity.

6. Техническое обслуживание

6.1. Замена батареи

Sensors are battery-powered. Replace batteries when the system indicates a low voltage warning. Refer to section 4.3 for battery types and installation.

• Датчики дверей/окнов: 23A 12V battery.
• ИК-детектор движения: AAA batteries (x3).

6.2. Низкая громкостьtage Индикация

Система обеспечивает низкое напряжение.tage indication for sensors, prompting you to replace batteries before they run out completely.

6.3. Анти-Тamper Защита

The main panel includes an anti-tamper switch. If the panel is unauthorizedly removed from its mounting, it will trigger an alarm.

7. Поиск Неисправностей

• Система не подключается к Wi-Fi:
  • Ensure your WiFi network is 2.4 GHz, not 5 GHz.
  • Убедитесь, что пароль от Wi-Fi, введенный в приложение, верен.
  • Check the signal strength of your WiFi at the alarm panel's location.
  • Restart the alarm panel and your WiFi router.
• GSM calls/SMS not working:
  • Ensure a standard 2G GSM SIM card is correctly inserted.
  • Verify the SIM card has credit and its PIN code is disabled.
  • Check for GSM signal strength on the panel.
  • Confirm the emergency contact numbers are correctly programmed.
• Ложные тревоги:
  • Check PIR motion detector placement to avoid direct sunlight, heat sources, or drafts that might cause false triggers.
  • Убедитесь, что датчики дверей/окон надежно установлены и выровнены.
  • Verify zone settings in the app to ensure correct configuration (e.g., delay zones).
• Датчики не реагируют:
  • Check and replace sensor batteries if necessary.
  • Ensure sensors are within the wireless range (up to 100 meters in open areas).
  • Re-pair the sensor with the main panel if connection is lost.

8. Технические характеристики

9. Гарантия и поддержка

KERUI provides free lifetime technical support for its products. For any questions or assistance, please contact KERUI customer service. The system is designed for 24/7 professional monitoring without requiring a contract.