Введение
This manual provides essential instructions for the safe and correct installation, operation, and maintenance of the Geberit G243173001 Water Supply Hose. This hose is specifically designed to connect the water supply to the Geberit Duofix Carrier 111.798, which is used with bidet seats. Please read this manual thoroughly before installation and keep it for future reference.
Информация по безопасности
- Перед началом любых сантехнических работ всегда перекрывайте главный водопровод.
- Ensure all connections are hand-tightened first, then gently tightened with a wrench to prevent leaks without overtightening.
- Inspect the hose and connections regularly for any signs of wear, damage, or leaks.
- Если вы не уверены в каком-либо шаге, проконсультируйтесь с квалифицированным сантехником.
Содержимое упаковки
The Geberit G243173001 package includes:
- 1 x Geberit G243173001 Water Supply Hose
No additional tools or components are included with this product.
Технические характеристики
| Модель | Г243173001 |
| Бренд | Геберит |
| Материал | Резина |
| Вес товара | 3.04 унции |
| Специальное использование | Water supply connection for Geberit Duofix Carrier 111.798 |
Настройка и установка
Before you begin, ensure the main water supply to the toilet area is turned off. You may need a wrench for tightening connections.
- Подготовьте территорию: Turn off the main water supply valve. Flush the toilet to drain the tank and bowl.
- Определите точки соединения: The Geberit G243173001 hose has two distinct ends. One end connects to the water supply valve, and the other connects to the Geberit Duofix Carrier 111.798.
- Подключитесь к водоснабжению: Carefully attach one end of the hose to the water supply valve. Hand-tighten first, then use a wrench for a quarter to half turn until snug. Do not overtighten.
- Connect to Duofix Carrier: Attach the other end of the hose to the designated water inlet on the Geberit Duofix Carrier 111.798. Hand-tighten, then use a wrench for a snug fit.
- Окончательная проверка: Убедитесь, что оба соединения надежны.
Image: Water supply connection point of the hose.
Image: Carrier connection point of the hose.
Изображение: Оверview of the Geberit G243173001 Water Supply Hose.
Операционная
After installation, slowly turn on the main water supply valve. Check all connections for leaks immediately. If no leaks are present, the system is ready for use with the Geberit Duofix Carrier and connected bidet seat.
Обслуживание
- Periodically inspect the hose and its connections for any signs of wear, cracks, bulges, or corrosion.
- Check for any drips or moisture around the connection points. Address any leaks promptly.
- Replace the hose if any damage is observed to prevent potential water damage.
Поиск неисправностей
Утечки в соединениях
- Причина: Loose connection or damaged washer/gasket.
- Решение: Turn off water supply. Gently tighten the connection with a wrench. If the leak persists, check the washer/gasket inside the connector for proper seating or damage. Replace if necessary.
Нет потока воды
- Причина: Water supply valve is off or partially closed.
- Решение: Ensure the main water supply valve and any inline shut-off valves are fully open.
Информация о гарантии
For detailed warranty information regarding the Geberit G243173001 Water Supply Hose, please refer to the official Geberit website or contact Geberit customer service directly. Warranty terms and conditions may vary.
Поддержка клиентов
If you have any questions, require technical assistance, or need to order replacement parts, please visit the official Geberit website or contact their customer support department. Contact details can typically be found on the Geberit webсайта или упаковки продукта.