RCF EVOX 12

RCF Evox 12 Portable Array Powered Active Speaker System User Manual

Модель: ЭВОКС 12 | Бренд: РЦФ

Введение

This manual provides essential information for the safe and efficient operation of your RCF Evox 12 Portable Array Powered Active Speaker System. Please read this manual thoroughly before using the product to ensure proper setup, operation, and maintenance. Retain this manual for future reference.

Продукт болееview

The RCF EVOX 12 is a high-performance 1400-watt PA System designed for live sound applications. It features a powerful 15-inch subwoofer and a 4-inch top array, delivering balanced and clear audio. The system is built with durable components, offering a maximum Sound Pressure Level (SPL) of 130dB. Integrated Digital Signal Processing (DSP) optimizes sound performance. Its design includes built-in wheels and a handle for enhanced portability, making it suitable for small to medium-sized event environments.

RCF Evox 12 Portable Array Powered Active Speaker System

Изображение: Спереди view of the RCF Evox 12 Portable Array Powered Active Speaker System, showcasing the subwoofer unit with the RCF logo and the speaker grille.

Что в коробке?

Upon unpacking, verify that all listed components are present and in good condition:

  • 1 x EVOX 12 Subwoofer Unit
  • 1 x EVOX 12 Column Array (Top Speaker)
  • 1 x Speaker Pole for mounting the column array
  • 1 х Адаптер питания
  • 2 x RCF Bags (for transport and protection)
  • 1 x Руководство пользователя (этот документ)

Инструкции по установке

  1. Размещение: Position the EVOX 12 subwoofer on a stable, flat surface. Ensure adequate ventilation around the unit.
  2. Mounting the Column Array: Insert the speaker pole into the designated pole mount on top of the subwoofer unit. Secure the pole firmly. Carefully attach the column array speaker to the top of the speaker pole. Ensure it is stable and locked into place.
  3. Подключение питания: Connect the power adaptor to the EVOX 12 subwoofer's power input and then to a suitable AC power outlet.
  4. Аудиовход: Connect your audio source (mixer, instrument, microphone) to the XLR input connectors on the subwoofer unit. The EVOX 12 supports XLR connectivity.
  5. Включение системы: Before powering on, ensure all volume controls are set to minimum. Power on your audio source devices first, then power on the EVOX 12 system.

Инструкция по эксплуатации

  • Регулятор громкости: Gradually increase the master volume control on the EVOX 12 subwoofer to the desired listening level. Adjust individual input levels on your audio source as needed.
  • Предустановки DSP: The EVOX 12 features onboard DSP. Refer to the control panel for available presets (e.g., Flat, Boost, Playback, Club) and select the one that best suits your application and environment.
  • Входной коэффициент усиления: Adjust the input gain for each connected source to prevent clipping and ensure optimal signal-to-noise ratio.
  • Последовательность выключения: When finished, first turn down the master volume on the EVOX 12, then power off the system, followed by your audio source devices.

Обслуживание

  • Уборка: Use a soft, dry cloth to clean the exterior surfaces of the speaker system. Avoid using abrasive cleaners or solvents.
  • Хранилище: When not in use, store the EVOX 12 in a dry, cool environment, preferably in its protective bags, to prevent dust accumulation and physical damage.
  • Управление кабелями: Ensure all cables are properly coiled and secured during transport and storage to prevent damage.
  • Инспекция: Periodically inspect cables, connectors, and the speaker pole for any signs of wear or damage. Replace damaged components immediately.

Поиск неисправностей

ПроблемаВозможная причинаРешение
Нет звука
  • Питание не подключено или не включено
  • Volume controls set to minimum
  • Audio source not connected or active
  • Неисправные кабели
  • Проверьте подключение питания и выключатель
  • Increase master volume and input gains
  • Verify audio source is on and connected
  • Проверьте с использованием разных кабелей.
Искаженный звук
  • Входной сигнал слишком высокий (ограничение сигнала).
  • Speaker overloaded
  • Incorrect DSP setting
  • Reduce input gain on audio source or EVOX 12
  • Lower overall volume
  • Select an appropriate DSP preset
Система не включается
  • Power cable loose or damaged
  • Нет питания от розетки
  • Check power cable connections
  • Проверьте розетку с другим устройством

Технические характеристики

БрендРЦФ
Номер моделиЭВОКС 12
Максимальная выходная мощность динамика1400 Вт
Signal-to-Noise Ratio (SPL)130 дБ
Диаметр сабвуфера15 дюйма
Диаметр твитера1 дюйма
Технология связиXLR (Wired)
Режим аудиовыходаСтерео
Тип крепленияОтдельно стоящий, крепление на колесо
Дополнительные возможностиPortable, Onboard DSP
Источник питанияПроводной электрический
Конкретные примененияEvents and Performances
ЦветЧерный
Уровень водонепроницаемостиНе водостойкий

Гарантия и поддержка

The RCF Evox 12 Portable Array Powered Active Speaker System comes with a 90-дневная ограниченная гарантия. This warranty covers manufacturing defects under normal use. For warranty claims or technical support, please contact RCF customer service or your authorized dealer. Keep your proof of purchase for warranty validation.

For further assistance, you may visit the official RCF website or consult their online resources for FAQs and additional support documentation.

© 2023 RCF. Все права защищены. Информация в данном руководстве может быть изменена без предварительного уведомления.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.