NETALLY LSPRNTR-300
NetAlly LSPRNTR-300 LinkSprinter 300 Network Tester User Manual
Model: LSPRNTR-300 | Brand: NETALLY
Введение
The NetAlly LinkSprinter 300 Pocket Network Tester is designed to quickly verify the functionality of copper Ethernet links and identify errors. This compact device ensures network connectivity status and port information is accurately documented for every link. It performs a comprehensive AutoTest, measuring Power over Ethernet (PoE) voltage, conducting a switch test, confirming DHCP server responsiveness, and verifying connectivity to gateway/router, internal IP services, and cloud resources. Test results can be automatically uploaded and annotated to the secure Link-Live cloud portal, streamlining deployment and troubleshooting tasks for network professionals.
Что в коробке?
- LinkSprinter Network Tester
- Ремешок на запястье
- 2 батарейки ААА (в комплекте)

Figure 1: LinkSprinter 300 Network Tester, wrist strap, and AAA batteries.
Настраивать
1. Установка аккумулятора
- Locate the battery compartment on the back of the LinkSprinter device.
- Откройте крышку батарейного отсека.
- Вставьте две батарейки типа AAA, соблюдая правильную полярность (+/-), как указано внутри отсека.
- Плотно закройте крышку батарейного отсека.

Рисунок 2: Сзади view of the LinkSprinter 300, highlighting the battery compartment.
2. Первоначальное включение
Press and hold the green power button on the front of the device for approximately one second to turn it on. The battery level is indicated by the color of the power icon. The link indicator will flash green when the device is ready to connect.

Рисунок 3: Передняя часть view of the LinkSprinter 300, showing the power button and indicator lights.
Инструкция по эксплуатации
Performing a Network Test
To initiate a test, simply connect the LinkSprinter to an Ethernet port using a standard RJ45 cable. If Power over Ethernet (PoE) is available, the test will start automatically. If PoE is not detected, press the green power button to begin the test manually.

Figure 4: Close-up of the LinkSprinter 300's RJ45 Ethernet port.
Indicator Lights and Test Results
The LinkSprinter performs five essential tests, with results indicated by the color of the corresponding LED icons:
| Икона | Тест | Зеленый (ОК) | Yellow (Warning) | Off/Red (Failure) |
|---|---|---|---|---|
| ⚡ (Lightning Bolt) | Питание через Ethernet (PoE) | PoE status OK. | Weak PoE power detected. | No PoE detected. |
| 🔗 (Link Chain) | Ссылка Ethernet | Ссылка установлена. | Cannot connect at 1Gbps (connected at 10/100Mbps). | Ссылка не установлена. |
| DHCP (Text) | DHCP IP Addressing | Able to provide valid IP address. | Н/Д | Static: Invalid Address / DHCP: No response from server. |
| ☁ (Cloud) | Gateway/Router Test | 3/3 Ping Responses. | 1/3 or 2/3 Ping Responses. | 0/3 Ping Responses. |
| ☁ (Cloud) | Internal Cloud/Internet Test | 3/3 Ping Responses. | 1/3 or 2/3 Ping Responses. | 0/3 Ping Responses. |
For a visual demonstration of the LinkSprinter's operation and indicator meanings, please watch the official product video:
Video 1: Official LinkSprinter Product Video. This video explains the five essential tests performed by the LinkSprinter and the meaning of each indicator light.
Link-Live Cloud Service Integration
The LinkSprinter automatically uploads test results to the secure Link-Live cloud portal. This service provides a central database for all your test results, enabling collaboration among IT teams and serving as a valuable reference for future troubleshooting. You can add more details to test results, such as wall jack location or even append photos, via the mobile UI or email.

Figure 5: LinkSprinter 300 paired with a smartphone, displaying detailed test results on the Link-Live mobile application.
Обслуживание
Замена батареи
When the battery indicator light shows low power (e.g., yellow or off), replace the two AAA batteries as described in the "Battery Installation" section. Using fresh batteries ensures optimal performance and uninterrupted testing.
Уборка
Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the RJ45 port is free of dust and debris.
Поиск неисправностей
- Нет питания: Убедитесь, что батареи установлены правильно и имеют достаточный заряд. При необходимости замените батареи.
- No Link Established (Link Chain icon off/blinking):
- Проверьте кабель Ethernet на наличие повреждений.
- Verify the network port on the switch is active and correctly configured.
- This could indicate bad cabling or a switch hardware failure.
- Weak PoE Power (Lightning Bolt icon yellow):
- The cable might be too long or damaged.
- There might be an issue with the switch port providing PoE.
- DHCP Issues (DHCP text red):
- If using static IP, check for duplicate IP addresses on the network.
- If using DHCP, the DHCP server might be misconfigured or not responding.
- Gateway/Internet Ping Failures (Cloud icon red/yellow):
- Check if the LinkSprinter's IP address is correct.
- The gateway might be down or configured to ignore pings.
- Yellow indication suggests high network traffic or a busy gateway.
Технические характеристики
- Размеры продукта: 5.25 x 3.5 x 2.5 дюйма; 0.56 унции
- Номер модели товара: ЛСПРНТР-300
- Аккумуляторы: Требуется 2 батарейки ААА (в комплекте)
- Производитель: NetAlly
- Страна происхождения: Малайзия
- Первая доступная версия: 6 марта 2015 г.
Гарантия
Подробная информация о гарантии обычно предоставляется вместе с товаром при покупке или может быть найдена на официальном сайте производителя. website. Please refer to the End User License Agreement (EULA) and warranty information included with your product packaging or available through the official NetAlly website for complete terms and conditions.
- 3-Year Protection Plan (Optional, available for purchase)
- 4-Year Protection Plan (Optional, available for purchase)
Поддерживать
For further assistance, detailed user guides, or to explore additional products, please visit the official NetAlly resources:
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.