1. Введение
The Altronix Tempo2 Digital Timer is a versatile two-stage timer designed for various applications requiring precise timing control. It operates on either 12 or 24 volt AC or DC power and features a Single Pole Double Throw (SPDT) contact rated for 2 amps at 115VAC or 28VDC. Key functionalities include an adjustable timing range from 1 second to 60 seconds for timed door release, daily/weekly test modes, one-shot activation, and a door prop alarm. The unit incorporates EEProm memory for settings retention and an LCD display for clear status indication.
This manual provides detailed instructions for the proper installation, operation, and maintenance of your Tempo2 Digital Timer to ensure optimal performance and longevity.
Image showing the Altronix Tempo2 Digital Timer unit, typically featuring its LCD display and control buttons.
2. Особенности
- Универсальный Два-Stage Timer: Provides flexible timing control for various applications.
- Гибкий вход питания: Operates on 12V or 24V AC or DC.
- SPDT Contact: Оценка 2 Amp / 115VAC / 28VDC.
- Adjustable Timing Range: 1 second to 60 seconds for timed door release.
- Режимы работы: Includes daily/weekly test mode and one-shot activation.
- Door Prop Alarm: Integrated alarm function for security applications.
- EEProm Memory: Retains programmed settings during power loss.
- ЖК-дисплей: Provides clear visual feedback for programming and status.
3. Настройка и установка
Proper installation is crucial for the reliable operation of the Tempo2 Digital Timer. Ensure all power is disconnected before beginning installation.
3.1 Монтаж
Mount the timer in a secure, dry location, away from direct heat sources or excessive moisture. Use appropriate fasteners for the mounting surface.
3.2 Подключение проводки
Refer to the wiring diagram provided with your unit for specific connection points. General wiring guidelines are as follows:
- Потребляемая мощность: Connect 12V or 24V AC/DC power to the designated terminals. Observe correct polarity for DC connections.
- Триггерный вход: Connect the trigger source (e.g., door contact, push button) to the trigger input terminals.
- Выход реле: Connect the device to be controlled (e.g., door strike, alarm panel) to the SPDT relay output terminals (Common, Normally Open, Normally Closed). Ensure the load does not exceed the 2 Amp / 115VAC / 28VDC rating.
Осторожность: Incorrect wiring can damage the unit or connected equipment. If you are unsure about any wiring procedures, consult a qualified electrician or technician.
4. Инструкция по эксплуатации
The Tempo2 Digital Timer features an LCD display and control buttons for programming and operation.
4.1 Setting the Timer Duration
- Access the programming menu using the designated button (refer to the unit's specific button layout).
- Navigate to the 'Timing Duration' setting.
- Adjust the time from 1 second to 60 seconds using the up/down buttons.
- Save the setting and exit the programming menu.
4.2 Daily/Weekly Test Mode
This mode allows for scheduled testing of the timer's functionality without full activation. Consult the unit's programming guide for setting specific test schedules.
4.3 One-Shot Activation
The one-shot activation feature allows the timer to trigger once for the set duration upon receiving a signal. This is useful for single-event operations.
4.4 Сигнализация дверных упоров
When configured, the door prop alarm will activate if a connected door remains open beyond a pre-set time. This feature enhances security by alerting users to prolonged open door conditions.
5. Техническое обслуживание
The Altronix Tempo2 Digital Timer is designed for reliable, long-term operation with minimal maintenance. Follow these guidelines to ensure continued performance:
- Уборка: Периодически протирайте устройство мягкой сухой тканью, чтобы удалить пыль и мусор. Не используйте абразивные чистящие средства или растворители.
- Соединения: Ежегодно проверяйте все электрические соединения, чтобы убедиться в их надежности и отсутствии коррозии.
- Среда: Убедитесь, что рабочая среда находится в указанном диапазоне температуры и влажности.
Внутри устройства нет деталей, которые пользователь мог бы обслуживать самостоятельно. Все работы по техническому обслуживанию должны выполняться квалифицированным персоналом.
6. Поиск Неисправностей
If you encounter issues with your Tempo2 Digital Timer, refer to the following common problems and solutions:
| Проблема | Возможная причина | Решение |
|---|---|---|
| Timer not powering on / LCD blank | Нет питания, неправильная громкостьtage, or reversed DC polarity. | Проверьте соединения блока питания и напряжение.tage. Ensure correct DC polarity. |
| Timer not activating output | Incorrect trigger input, faulty wiring, or incorrect programming. | Verify trigger input signal. Check output wiring. Review programming settings. |
| Неверная продолжительность времени | Timer duration set incorrectly. | Re-enter the programming menu and adjust the timing duration as needed. |
| Door prop alarm not functioning | Door contact faulty, wiring issue, or alarm not enabled. | Check door contact and its wiring. Ensure door prop alarm is enabled in settings. |
If the problem persists after attempting these solutions, contact Altronix technical support for further assistance.
7. Технические характеристики
- Модель: TEMPO2
- Бренд: Альтроникс
- Потребляемая мощность: 12 В или 24 В переменного/постоянного тока
- Тип контакта: SPDT (однополюсный двухпозиционный переключатель)
- Рейтинг контакта: 2 Amp @ 115VAC / 28VDC
- Диапазон времени: 1 second to 60 seconds (adjustable)
- Память: EEProm (retains settings)
- Отображать: ЖК-дисплей
- Функции: Два-сtage operation, daily/weekly test mode, one-shot activation, door prop alarm
- Вес товара: Примерно 0.2 фунтов (0.09 кг)
- СКП: 782239938292
- GTIN-номер: 782239938292
8. Гарантия и поддержка
Altronix products are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty information included with your product packaging or visit the official Altronix webсайт.
For technical support, troubleshooting assistance, or to inquire about service, please contact Altronix customer support. Have your model number (TEMPO2) and any relevant purchase information ready when contacting support.
Altronix Contact Information:
Please refer to the official Altronix website for the most current contact details, including phone numbers and email addresses for technical support.
